You are here

New Products

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(6 pages)
C-EC20X4-475-2D5Capacitor - CE Mfg., 475V, 20/20/20/20µF, Electrolytic, 2.5" Height
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.

  • 20/20/20/20uF 475VDC Electrolytic
  • FP / Twist Lock Style. Solder Lugs
  • -10%, +50% Tolerance, 65°C Temperature Rating
  • 1⅜"D X 2.5"H
  • All CE manufactured can capacitors have a two year warranty against manufactured defects.
Please Log In to
view prices
Click to read more
C-EC60-30X2-450Capacitor - CE Mfg., 450V, 60/30/30uF, Electrolytic
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 60/30/30uF 450VDC Electrolytic.
  • FP / Twist Lock Style. PCB Mount.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 3/8"D X 3"H.


All CE manufactured can capacitors have a two year warranty against manufactured defects.


Please Log In to
view prices
Click to read more
C-UD0033-400Capacitor - 400V, Polypropylene, Axial Leads, .0033 uF
General purpose polypropylene film capacitor.
  • Dissipation Factor: 0.001 Max at 1000 Hz and 25°C , 0.004 Max at 10 kHz and 25°C
  • Temperature Coefficient: -200 PPM/°C: -100 PPM/°C, 100 PPM/°C
  • ESR: 53.588 Ohms at 1 kHz and 20°C
  • Self Inductance: 1 Nanohenries maximum per mm of body length and lead length
  • dvdt: 15 V/µs
  • Tolerance: -10 % , +10 %
  • Temperature Range: -55°C to +105°C
    • Above 85°C the rated (DC/AC) voltage must be derated at per 1.25%°C
  • WVDC: 400 Volts DC
  • VAC: 220 Volts AC
  • Terminal to Terminal Dielectric strength: 1.6 times the rated DC voltage when applied between the terminals for 2 seconds
  • Terminal to case Dielectric strength: 2 VAC when applied between the terminals and case for 2~5 seconds
  • Insulation Resistance (Terminal to Terminal): 30000 MINIMUM after 100 Volts DC is applied for 60 seconds at 20°C
  • Insulation resistance (Termi
Please Log In to
view prices
Click to read more
K-956Effects Pedal Kit - MOD® Kits, The Thunderdrive Deluxe LTD, Overdrive

The Thunderdrive Deluxe LTD is an overdrive pedal kit that will provide a strong clean signal boost in the early gain settings and smooth distortion at maximum gain settings. Adjusting output and distortion controls provides a wide variety of tones in spite of its simple construction. It is capable of overdriving the preamp section of your guitar amp or adding its own layer of distortion at lower volume. This version is equipped with a three position diode selector switch.



The switch offers three different settings and tones. The top position is the classic silicon clipping diodes used in the original Thunderdrive. The middle position gives you the lifted diode "turbo" sound from the Deluxe model. The bottom position is a new setting limited to this version using germanium diodes for a warm vintage distortion.


Please Log In to
view prices
Click to read more
M-FLYECHOEffects Pedal - TWA, Flyboys FB-03, Echo

The TWA Flyboys FB-03 is a massive sounding delay pedal in a tiny package. This pedal takes you from the snappiest slapback sounds to big spacious delays with over 600 milliseconds of delay time. The bright and articulate delay signal keeps the mix crisp and transparent while the repeats add a touch of modulation for a warm tape like sound as the signal decays. The FB-03 Echo can go from one repeat to infinite repeats putting the pedal into self oscillation for wild feedback effects. The FB-03 Echo also features a true bypass footswitch and comes with a DC jack to battery clip converter cable.



  • 9VDC 2.5mm Barrel Connector
  • 42mA maximum current draw
  • True bypass switching
  • 20 – 620 ms delay time
  • Self oscillating
  • Extruded aluminum chassis
  • Quality components
  • 1.75” x 3.75” footprint

Please Log In to
view prices
Click to read more
P-A-GASKET-E-12Gaskets - Eminence, Replacement Set

Set of four genuine Eminence® replacement gaskets for one 12" speaker. ¼" thick, durable foam with adhesive on one side for mounting.


Please Log In to
view prices
Click to read more
P-A-NEO-250-8Speaker - Celestion, 12", Neo 250 Copperback, 250 watts

The Celestion Neo 250 Copperback provides all of the musicality associated with classic Celestion speakers but at an enormous power rating and featherlight weight. This speaker supplies transparent tone with a tight low end, neutral low mids, clear upper mids, and controlled highs. The combination opens up the speaker in a way that can reproduce and accentuate the natural tonality and character of the amplifier. The Copperback is a versatile speaker with a wide dynamic response, excellent touch sensitivity, and endless amounts of headroom in a 5.5lb package.

Please Log In to
view prices
Click to read more
P-GRV-505FVXTuner - Grover, Vintage, for Fender, Roto-Grip
Colors Available:

The Grover Roto-Grip 505F series are upgrades for vintage and vintage style Fenders that require zero modifications. These inline tuners feature the famous 18:1 ratio and thumb screw locking mechanism.


Please Log In to
view prices
Click to read more
P-GTARM02-RWTremolo Arm - Fender®, Stratocaster, Road Worn®

Original Fender® Road Worn® tremolo arm with aged white tip. Metric M5 threading.


Please Log In to
view prices
Click to read more
P-GTBS-VS-RWBridge Saddles - Fender®, for Vintage Stratocaster, Road Worn®

Original Fender® Road Worn® vintage Strat bridge saddles (6 saddles) with relic’d screws and springs for mounting each saddle. Adjustment hex wrench included.

Please Log In to
view prices
Click to read more

Pages

(6 pages)