New Products

15° sloped aluminum consoles from Hammond’s 1456 Series. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:

• 4" x 5.5" x 2" (1” height at front)
• Bottom panels are 0.081” (2 mm) thick aluminum
• Top panels are 0.064” thick aluminum
• Fully Powder Coated
• Comes with self adhesive rubber feet and required mounting hardware.

PCB Mount stereo jacks with a very low profile. These jacks have a smaller footprint than the Lumberg jacks that are popular for tight pedal builds. They are perfect for top mounted jack pedal builds and any other project where space is limited. Mounting nut and flat washer included.

• M9*0.75 Bushing Thread
• Stereo 3-Conductor (TRS)
• Open Circuit (does not have switched terminal).
• Includes nut and washer.

Black PCB mounted 3.5mm mono jacks commonly found in DIY Eurorack projects. These jacks feature black hardware with a matching black nut. They also use a square bushing plate for added durability. Mounting nut is included.

Six conductor Flexstrip ribbons cables. These ribbons feature a nomex insulator so there are no melting issues when soldering. Unlike typical ribbon cables, the wires are designed to distribute the stress of the bend and vibrations throughout the entire cable rather than directly on the solder joints. These cables are a great choice for PCB to PCB connections in pedals, synths, and other electronics.

Four conductor Flexstrip ribbons cables. These ribbons feature a nomex insulator so there are no melting issues when soldering. Unlike typical ribbon cables, the wires are designed to distribute the stress of the bend and vibrations throughout the entire cable rather than directly on the solder joints. These cables are a great choice for PCB to PCB connections in pedals, synths, and other electronics. The spacing is .1" (2.54mm).

Eight conductor Flexstrip ribbons cables. These ribbons feature a nomex insulator so there are no melting issues when soldering. Unlike typical ribbon cables, the wires are designed to distribute the stress of the bend and vibrations throughout the entire cable rather than directly on the solder joints. These cables are a great choice for PCB to PCB connections in pedals, synths, and other electronics. The spacing is .1" (2.54mm).

Three conductor Flexstrip ribbons cables. These ribbons feature a nomex insulator so there are no melting issues when soldering. Unlike typical ribbon cables, the wires are designed to distribute the stress of the bend and vibrations throughout the entire cable rather than directly on the solder joints. These cables are a great choice for PCB to PCB connections in pedals, synths, and other electronics. The spacing is .1" (2.54mm).

Genuine Bigsby mounting screws pack. This pack comes with a variety of Bigsby screws common to many of their tremolo units. Item Qty BigSby Part Number Body Mount Screws 4 0495-1927 Hinge Mount Screws 4 0495-1923 Handle Bracket Set Scre 2 0495-1931

Genuine Bigsby extra short hinge parts kit. Includes the hinge pin and four mounting screws. The extra short hinge is stock on the B3 and B7. Item Qty BigSby Part Number Hinge 1 0495-0896 Hinge Pin 1 0495-1635 Mounting Screws 4 0495-1932

Genuine Bigsby spring pack. This pack comes with all of the Bigsby spring sizes along with the nylon spring washer and fiber handle washer. Item Qty BigSby Part Number 11/16" long spring 1 0495-1964 7/8" long spring 1 0495-1967 1" long spring 1 0495-1975 1 1/8" long spring 1 0495-1978 Handle washer 1 0495-2331 Spring washer 1 0495-0410

Genuine Bigsby Gretsch B6 hinge parts kit. Includes the correct short hinge pin and four mounting screws. Item Qty Bigbsy Part Number Hinge 1 0495-0890 Hinge Pin 1 0195-1638 Mounting Screws 4 0495-1923

Solid wood knobs in the art deco style found on many D'Angelico guitars. The three inlaid lines serve as the indicator. Fits 6mm T24 (fine) knurled shafts.

• Height: 0.6 in.
• Diameter: 0.975 in.
• Fits T24 Knurled Shafts

OP07 precision op amp in an 8-pin DIP package.These devices offer low offset and long-term stability by means of a low-noise, chopperless, bipolar-input-transistor amplifier circuit. For most applications, external components are not required for offset nulling and frequency compensation. The true differential input, with a wide input-voltage range and outstanding common-mode rejection, provides maximum flexibility and performance in high-noise environments and in noninverting applications. Low bias currents and extremely high input impedance are maintained over the entire temperature range.

Black jute weave style grill cloth. 34" wide. Great replacement for Mesa amps and others. Sold per yard.

Black and tan basket-style grill cloth. 34" wide. Sold per yard.

Natural color jute weave style grill cloth. 34" wide. Great replacement for Mesa amps and others. Sold per yard.

Black British diamond style grill cloth. Great replacement for Vox amps. 36" wide. Sold per yard.

Natural color cane weave grill cloth. Great replacement for Marshall, Orange and other British amps. 33" wide. Sold per yard.

Vintage-style oxblood style grill cloth with gold stripes. Great for tweed style amps. 36" wide. Sold per yard.

Black cane weave grill cloth. Great replacement for Marshall, Orange and other British amps. 33" wide. Sold per yard.

Black and tan British weave grill cloth. Great replacement for the JTM30 and other British amps. 34" wide. Sold per yard.

Brown British diamond style grill cloth. Great replacement for Vox amps. 36" wide. Sold per yard.

Wah pedal enclosure, bottom, and foot-pedal shell and hardware. Enclosure shell & foot pedal are cast aluminum.

NPN Darlington transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = 45 V
• Max collector to base voltage = 45 V
• Max emitter to base voltage = 6.5 V
• Max collector current = 0.2 A (continuous)