New Products

Vacuum Tube Retainer - for EL84 Tubes, Marshall Style
Retainer for EL84 tubes. For use with guitar amps and applications where the tube is suspended upside down in the chassis. This style of EL84 retainer was popularly used in vintage 18W Marshall amps. The two brackets mount using the socket’s hardware.
Please Log In to view prices
Heat Shrink - 2:1, Thin Wall Tubing, Polyolefin, Black
Thin wall heat shrink tubing available in multiple diameters. The flexible yet durable polyolefin material and standard 2:1 shrink ratio make this heat shrink a great option for electrical insulation, cable bundling, and component protection.
  • Operating Temperature: -55°C to +135°C
  • Minimum Shrink Temperature: 70°C
  • Full Recovery Temperature: 100°C
  • UL Approval
  • RoHS Compliant
Sold by the foot
Please Log In to view prices
Cable Clamp - Black Nylon, .203” Mounting Hole
Black nylon cable clamps perfect for securing cables to cabinet walls. These clamps feature a .203 in. mounting hole. The ⅜ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the power cord. The ¼ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the RCA reverb tank cables. The 5/16 in. version works well with the S-W125X and S-W132X bare end power cables. See P-HCABLECLAMP-X for white nylon versions of these clamps.
Please Log In to view prices
Vacuum Tube - 12AX7 / ECC83-WA, Tube Amp Doctor, Premium Selected
The new Tube Amp Doctor premium selected 12AX7 /ECC83-WA is a low-noise and low microphonic version of the 12AX7. The ECC83-WA Premium Selected has a balanced tone with a notable emphasis of the mids. The overall linear sound offers great string attack and chord separation. The low end is well defined. The result is a tone that works well in both modern amps but also vintage guitar amplifiers. If the ECC83-WA is used in hi-fi audio amplifiers, the tube adds a musical clarity and presence to the signal. The new TAD™ ECC83-WA is a miniature, high-mu twin triode, selected and recommended for guitar amps to improve overall responsiveness and dynamics. Great for guitar clean tones with a distinct pick attack and pronounced upper mids to cut through every mix. Crunchy tones still feature a very good string separation which is also ideal for fully saturated sounds and modern amplifiers with a tight bass response.
Please Log In to view prices
Vacuum Tube - KT88-STR, Redbase, Tube Amp Doctor
The TAD KT88-STR Redbase® is built in the style of the early British MOV KT88 with the big and heavy glass envelope and beautifully polished metal base. The Redbase® features a gold control grid for outstanding performance and reliable stability. A breath-takingly big and precise tone and great appearance make the new TAD KT88-STR Redbase® the best choice for both, high-end audio applications and powerful bass guitar amps, providing a natural and three dimensional tone with pleasingly full warmth and fine, subtle highs. A very musical response, with great sound and finest details in mids and top-end; a linear and harmonious overall response with a very organic tone, make the TAD KT88-STR Redbase® TAD’s favorite tube in the KT88 and 6550A class.
Please Log In to view prices
Grommet - Rubber, for FZ-1 Style Footswitch Mounting
Large rubber grommet for mounting footswitches on FZ-1 and FZ-1A style builds. Requires a 0.812” (20.6mm) mounting hole. This grommet’s 0.5” (12.7mm) inner diameter fits most common footswitches. These are great for replacing originals, replica builds of these Maestro pedals or for general sound damping on footswitches.
Please Log In to view prices
Metal Stamp Set - 0-9 Digits, 0.125” Numeral Height
Metal stamp set with nine stamps for the numbers 0 through 9. The 6 stamp is also used for 9. The height of a stamped numeral is 0.125”. These stamps mark single characters by indenting the mark into the surface of a material. The process is simple, requiring only a hammer to strike the stamp onto the material. This stamp set is a great tool for adding control labels to projects such as pedal enclosures.
Please Log In to view prices
Metal Stamp Set - A-Z Alphabet, 0.125” Letter Height
Metal stamp set with 27 stamps for the letters A through Z and an ampersand. The height of the stamped letter is 0.125”. These stamps mark single characters by indenting the mark into the surface of a material. The process is simple, requiring only a hammer to strike the stamp onto the material. This stamp set is a great tool for adding control labels to projects such as pedal enclosures.
Please Log In to view prices
Fret File - Fret Dressing File, Hard Chrome Coated, for Stainless Steel Fretwire
Made in Japan. Files specially designed for fret dressing and fret end work. Used for rounding fret ends and deburring. The hard chrome coating used on these files allows for use on both standard fret materials as well as stainless steel frets.
  • Size Medium = 2mm radius for medium frets.
  • Size Jumbo = 3mm radius for jumbo frets.
Please Log In to view prices
Knob - Plastic, Set Screw, Skirted w/ Arrow, 1.12" Diameter
Colors Available:
New!:
Large black plastic control knob with set screw and brass insert. The two different options include one version with a black plastic top and another version with a radial-brushed metal cap with a chamfered edge, each sold separately. The grip has a smooth straight knurl and the skirt features an arrow indicator. Fits ¼” (6.35mm) pot shafts.
Please Log In to view prices
LED Lens - Flat Cylindrical, Fresnel, Polycarbonate, 3mm
Colors Available:
Panel mount LED lenses made of high quality polycarbonate. These flat cylindrical lenses provide a unique retro appearance with a small panel footprint and work well in any project using LED indicators. Features:
  • 0.171” mounting hole
  • For panel thicknesses of 0.031” to 0.094″
  • Fresnel lens
  • Flat cylindrical shape
  • Fits standard 3mm LEDs
Please Log In to view prices
LED Lens - Square, Fresnel, Polycarbonate, 3mm
Colors Available:
Panel mount LED lenses made of high quality polycarbonate. These square lenses provide a clean semi-flush appearance with a small panel footprint and work well in any project using LED indicators. Features:
  • 0.171” mounting hole
  • For panel thicknesses of 0.031” to 0.125″
  • Fresnel lens
  • Low Profile
  • Fits standard 3mm LEDs
Please Log In to view prices
LED Lens - Flat Cylindrical, Fresnel, Polycarbonate, 5mm
Colors Available:
Panel mount LED lenses made of high quality polycarbonate. These flat cylindrical lenses provide a unique retro appearance with a small panel footprint and work well in any project using LED indicators. Features:
  • ¼” mounting hole
  • For panel thicknesses of 1/16” to ⅛”
  • Fresnel lens
  • Flat cylindrical shape
  • Fits standard 5mm LEDs
Please Log In to view prices
LED Lens - Fresnel, Polycarbonate, 3mm
Colors Available:
Panel mount LED lenses made of high quality polycarbonate. These lenses provide a clean semi-flush appearance with a small panel footprint and work well in any project using LED indicators. Features:
  • 0.171” mounting hole
  • For panel thicknesses of 0.031” to 0.125″
  • Fresnel lens
  • Low Profile
  • Fits standard 3mm LEDs

For a version that fits 5mm LEDs, see P-L710-X.
Please Log In to view prices
Jewel - Fluted Dome Style, for lamps / bulbs, Red
Fluted dome style lamp jewels were used on vintage equipment from many manufacturers. This jewel fits the standard P-L124-P pilot light found on most Fender amps as well as the P-L110. Threading: 9/16 - 27
Please Log In to view prices
Tuners - Gotoh, SG381, Magnum Lock Trad, Schaller-style Knob, 6-in-a-line
Locking SG381 tuners from Gotoh. These tuners use the Gotoh Magnum Lock Traditional thumbscrew system that combines classic functionality with Gotoh technology. The SG381 features a 16:1 gear ratio and has evolved through improvement without compromise at any stage and comes equipped with a considerable application of high-technology as standard. With the improvement of precision fitting gears and a marvelous touch on playing, they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. These come with a Schaller-style head and are perfect for your six-in-a-line setup. Mounting hardware included.
package of 6
Please Log In to view prices
Nut - Black Bone, Pre-slotted, Gibson Style
Pre-slotted black bone nuts for Gibson necks with a 12” radius. A 12” fingerboard is the common radius used on most Gibson guitars. The bone used for the pre-shaped and pre-slotted nuts is dyed black using a process that results in a fully black nut.
  • Height - 9.3 mm
  • Width - 43.4 mm
  • Thickness - 4.8 mm
  • Radius - 12 in.
Please Log In to view prices
Nut - Black Bone, Pre-slotted, Strat and Tele style, 7.25" Radius
Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 7.25” radius. A 7.25” fingerboard radius originated in the early 1950s and was used for most Fender® electric instruments until the 1980s.
  • Height - 5.4 mm
  • Width - 42.86 mm
  • Thickness - 3.3 mm
  • Radius - 7.25 in.

For a version of this nut with a 9.5” radius, see P-GTNN21.
Please Log In to view prices
Nut - Black Bone, Pre-slotted, Strat and Tele style, 9.5" Radius
Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 9.5” radius. A 9.5” fingerboard has been the standard Fender® neck radius since the 1980s. The bone used for the pre-shaped and pre-slotted nuts is dyed black using a process that results in a fully black nut.
  • Height - 5.4 mm
  • Width - 42.86 mm
  • Thickness - 3.3 mm
  • Radius - 9.5 in.

For a version of this nut with a 7.25” radius, see P-GTNN20.
Please Log In to view prices
Screw - #8, Phillips, Oval Head, Wood, Nickel-plated
#8 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® blackface and silverface speaker cabinets to secure the back panel. They are also used to attach baffle boards on amps from this era. They are also the same type used for securing strap buttons as well as for mounting necks on Telecaster®, Stratocaster®, and other Fender® guitars.
package of 4
Please Log In to view prices
Screw - 6-32 x ⅝”, Phillips, Oval Head, Machine, Nickel-plated
#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of oval head screw matches the pickup and switch mounting screws found on Fender® guitars with countersunk holes on the pickguard.
package of 5
Please Log In to view prices
Covers - for Chassis Holes, Nickel-plated Steel
High quality chassis hole covers for a wide variety of hole sizes. These covers use tapered tabs that easily snap into the hole to securely hold the cover in place. If a more permanent solution is required, the metal tabs can be bent outward after installing to secure the hole cover to the chassis. These nickel plated covers are a great way to modify an existing chassis or cover up mistakes. This list shows some common hole sizes for a variety of parts used on amplifiers, pedals and other equipment.
Please Log In to view prices
Screw - #3 x ⅜”, Slotted, Round Head, Sheet Metal, Nickel-plated
#3 x ⅜” slotted drive wood screws made of nickel plated steel. This style of round head screw is commonly used to secure Kluson and Kluson style tuners as well as string trees on early Telecaster® guitars including the Nocaster® and Esquire® guitars.
package of 7
Please Log In to view prices
Screw - #6-32 x 1 ¼” Rosette Head, Machine, Bronze-plated
#6-32 x 1-¼” machine screws made of bronze plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For an 8-32 rosette head screw, see S-HRS8-1116.
package of 4
Please Log In to view prices