New Products

Pickup - McNelly, Stagger Swagger, Open Nickel
This McNelly Stagger Swagger pickup features an open nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.
Please Log In to view prices
Knob - Metal, Set Screw, Neve / Marconi Style, Dual Concentric Lower, 0.99” Diameter
Metal knobs with set screws and brass insert. This knob is a close match for the lower section of the dual concentric knobs used on Marconi radios and Neve consoles. It features an inlay indicator line and a diamond pattern grip. The diameter is 0.99 inch. Pairs with P-K396-X . Fits ¼” (6.35mm) pot shafts.
Note: Knob is sold separately
Please Log In to view prices
Knob - Plastic, Set Screw, Neve / Marconi Style, Skirted, 1” Diameter
Colors Available:
Plastic knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line and a clear plastic skirt. The skirt diameter is 1 inch. Fits ¼” (6.35mm) pot shafts. For a non-skirted version see P-K398-X.
Please Log In to view prices
Knob - Phenolic, Set Screw, Fairchild Style, Pointer
Phenolic pointer knobs with a set screw and brass insert. These distinctive pointers are close matches for the classic knobs used on Fairchild compressors like the 660 / 670. Each pointer features a V-shaped painted inlay indicator. Fits ¼” (6.35mm) pot shafts. Pairs nicely with P-K348 (see photo)
Please Log In to view prices
Knob - Plastic, Knurled Shaft, Skirted Pointer, 0.93" Diameter
Black plastic control knob for both coarse and fine knurled shafts. This distinctive pointer knob is similar in style to the Davies 1550 but in a smaller size. It features an inlay line indicator. The skirt has a diameter of 0.93 inches. Fits T18 and T24 knurled pot shafts.
Please Log In to view prices
Knob - Chicken Head, Micro, Knurled Shaft, 0.65” Diameter
Plastic chicken head knobs for coarse knurled shafts. These tiny chicken head knobs are great for pedal builds or cramped face plates. They feature an inlay indicator line. The total length of the chicken head is 0.93 inches. Fits T18 knurled shafts.
Please Log In to view prices
Knob - Plastic, Set Screw, Neve / Marconi Style, 0.495” Diameter
Colors Available:
Plastic knobs with a set screw and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The diameter is 0.495 inches. Fits ¼” (6.35mm) pot shafts.
Please Log In to view prices
Knob - Phenolic, Set Screw, Fairchild Style, Skirted, 1.935” Diameter
Phenolic skirted knob with set screws and brass insert. This massive knob is a close match for the classic knobs used on Fairchild compressors like the 660 / 670. It features a V-shaped painted inlay indicator on the skirt as well as a dot indicator on the top of the grip. The large skirt has a diameter of 1.935 inches. Fits ¼” (6.35mm) pot shafts. Pairs nicely with P-K347-X (see photo)
Please Log In to view prices
Knob - Mini Witch Hat, Knurled Shaft,1-10, Skirted, 0.912” Diameter
Colors Available:
Mini witch hat knobs in the style of vintage Fender® amps knobs. These small skirted knobs fit coarse knurled (T18) pot shafts. The skirt diameter is 0.912” inches and has 1-10 printed on it.
Please Log In to view prices
Knob - Plastic, Set Screw, Raytheon Style, Skirted, 1.812” Diameter
Plastic skirted knob with set screws and brass insert. This massive knob features a textured matte finish and closely matches the look of Raytheon knobs used on vintage test equipment, radios, and studio equipment. It features a painted inlay arrow indicator on the skirt. The large skirt has a diameter of 1.812 inches. Fits ¼” (6.35mm) pot shafts.
Please Log In to view prices
Transformer - 42TL019, Audio & Signal, 10KΩ:600Ω, PC Mount
Small 42TM018 audio transformers with a 10KΩ:600Ω impedance. This transformer is a popular choice for pickup simulators in various effects such as fuzz pedals. The leads are soft metal wire and can be adjusted to fit a variety of applications. RoHS compliant. Rated for 200mW.
Please Log In to view prices
Rubber Tread - Dunlop, Fuzz Face
Genuine rubber tread for Fuzz Face pedals from Dunlop. The tread is for full size Fuzz Face enclosures and has a cutout for the footswitch and text logo. The tread comes with a 3M adhesive backing.
Please Log In to view prices
Pick Holder - Dunlop, Adhesive Back
The Dunlop adhesive backed pick holder is a great way to store picks nearby. Attach the durable plastic pick holder to a stand, amp, or any convenient location and fill it up with your favorite picks.
Please Log In to view prices
Integrated Circuit - Coolaudio, MN3102, Clock Generator for BBD
The Coolaudio V3102 is a drop-in replacement for the original Panasonic MN3102 clock generator. The MN3102 clock driver is used in many BBD flanger, chorus, and delay effects. The MN3102 is a CMOS LSI generating a two phase clock signal of low output impedance necessary to drive MG3200 series low voltage operation BBD.
The VGG power supply circuit is built-in exclusively used for the MN3200 series BBD and the most suitable VGG voltage can be obtained when the MN3102 is used with the same supply voltage as the BBD. Self-oscillation is enabled by external capacitors and resistors and oscillation drive is possible by the separate excitation oscillation.
Please Log In to view prices
Integrated Circuit - Xvive, MN3007, BBD, 1024 Stage
The XVive MN3007 is a drop-in replacement for the original Panasonic 1024-stage MN3007 BBD chip used in many chorus, vibrato, and flanger pedals and effects.
The MN3007 is a 1024-stage, low-noise, long-delay BBD that provides a signal delay of up to 51.2 milliseconds. Due to its long delay times, the MN3007 is especially suitable for reverb effects in electronic musical instruments and PA equipment.
Please Log In to view prices
Tool Kit - System 65™ Guitar String Change Kit
This kit has everything a guitar player needs for a quick and easy string change: a String Cutter, a Stringwinder, a Multi-Tool for tweaks, and a Superlube® Gel Pen to help stay in tune. The Dunlop System 65™ Guitar String Change Kit is a nice compact case packed with high quality tools that make changing strings a breeze. Includes:
  • Case
  • String Cutters
  • Peg Winder
  • Multitool
  • Superlube® Gel Pen
Please Log In to view prices
Humidifier - Herco, Guardfather
Large clay-filled plastic container (1 5/8" high x 2" diameter) helps prevent drying out and cracking of guitars, violins, cellos, and other wooden instruments. The Herco Guardfather is a simple-to-use humidifier system for use in instrument cases to keep a constant level of humidity preventing cracks and other issues related to dried out wood.
Please Log In to view prices
Strap locks - Dunlop, Ergo Lok Strap
The Dunlop Ergo Lok Straps are a simple way of ensuring your strap stays on your guitar. Attach a strap then the Lock Straps onto the strap button to secure your strap with no modifications or drilling required. Sold as a pair.
Please Log In to view prices
Pick Holder - Dunlop, Keychain, D Logo
Keep your picks handy and secure with the Picker's Pouch. Made from genuine leather, it'll hold a wide variety of sizes and shapes so that you have what you need when it's time to jam. Slip it on your keychain so that you always have a pick to play with.
Please Log In to view prices
Integrated Circuit - Xvive, MN3009, BBD, 256 Stage
The XVive MN3009 is a drop-in replacement for the original Panasonic 256-stage MN3009 BBD chip used in many chorus, vibrato, and flanger pedals and effects.
The MN3009 is a 256-stage BBD that boasts a wide dynamic range and low distortion. Its signal delay of up to 12.8 milliseconds makes it a perfect choice for vibrato and/or chorus effects in electronic musical instruments.
Please Log In to view prices
Integrated Circuit - Xvive, MN3005, BBD, 4096 Stage
The XVive MN3005 is a drop-in replacement for the original Panasonic 4096-stage MN3005 BBD chip used in many delay pedals and effects.
Xvive Audio’s first-ever product was the MN3005: a re-creation of the legendary bucket brigade chip used in the Deluxe Memory Man and many other iconic effect pedals and instruments. Now, the Xvive MN3005 is at the heart of delay pedals produced by some of the world’s top effect pedal brands.
The MN3005 is the world’s first 4096-stage long-delay BBD—eight times longer than the 512-stage BBD. It is manufactured using a P-channel low-noise silicon gate process.
A long-signal delay time of 205 ms can be obtained at a clock frequency 10 kHz, with a sound-to-noise ratio of 75dB. This ratio is an improvement of 20dB, as compared to eight connected 512-stage BBDs!
Please Log In to view prices
String Winder - Dunlop, Black
Replace your strings in seconds with this classic winder. Its notched head removes bridge pins quickly and safely. The small size is great for gig bags and instrument cases.
Please Log In to view prices
Slide Pad - MXR, Small
Genuine MXR slide pad for use with small MXR pedals (1590B enclosures). The small slide pad attaches to the bottom cover plate of the enclosure using the adhesive backing.
Please Log In to view prices
Turret Strip - 9 Lugs, Single Row, U-style
Single row of 9 U-style terminals on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.
Please Log In to view prices