Maintenance Products

S-F313 Adhesive Replacement Cap - Bob Smith Industries
Replacement colored cap that fits over the S-F312 top. These are sold individually and the color is randomly selected
Please Log In to view prices
S-F312 Adhesive Replacement Top - Bob Smith Industries
Replacement top that is on all of BSI's non-Pocket CAs. Perfect for replacing damaged tops on any of the CA glues. These tops can be soaked in acetone overnight to remove any buildup of CA on the inside and outside of the nozzle. Compatible with S-F500,S-F501, S-F502, S-F503, S-F504, S-F505, S-F550, S-F551, and S-F540.
Please Log In to view prices
S-F32X Adhesive Applicator - Bob Smith Industries, 6” long, Non-clog
Non-clog 6" long pipette for CA glue application. The regular tip is recommended for gap filling and extra-thick CA. CA is sucked up into the applicator by inserting it into an open CA bottle with the bulb at the end compressed, like an eyedropper The fine tip is recommended for the application of thin CAs. It can also be used for the fine application of Insta-Set accelerator and for applying fine lubricating oils. CA can be kept in the applicator for two weeks.
Please Log In to view prices
S-TMIX-1-LID Lid - For 1 Quart Mixing Container
Lid for 1 quart mixing container. Seals container and prevents spills. High-density polyethylene. Use with S-TMIX-1 (sold separately).
Please Log In to view prices
S-TSTJR-1 Container - Jar, Clear Round Mouth, White Cap, 2 oz
2 oz clear jar with a white cap. Instant identification for your parts, liquids or dry goods. Super wide mouth for easy filling.
  • Durable polystyrene jars.
  • FDA compliant.
  • Caps included.
Please Log In to view prices
S-CL-EXT-PS2 Flex Tip - Caig, Extension Tube for Perfect-Straw
Now you can get into all the hard to reach places with the new CAIG FLEX-TIP™ - Extension Tube for Perfect-Straw™.
  • Reduces straw diameter at tip
  • Reduces flow
  • Flexible - Get to Hard to reach places (1.5" length)
  • Fits ALL Perfect-Straw™ Tubes
  • Chemically resistant tube
Please Log In to view prices
S-TMIX-1 Container - for mixing and measuring, 1 Quart
1 quart mixing container. Quickly measure and mix paints, chemicals and adhesives. Clearly marked graduations for quick measuring. Made of translucent high-density polyethylene. Optional lid S-TMIX-1-LID (sold separately) seals the container and prevents spills.
Please Log In to view prices
S-C216X Plastic Polish - Novus #1, plastic clean and shine
Cleans and glazes plastic surface polish out and protect against small scratches, finger markings, dust build-up, and other markings. Significantly reduces haziness and is anti-static.
Please Log In to view prices
S-F508X Adhesive Extender Tip - Bob Smith Industries, for Glue
Bob Smith Industries ™ Extender Tip for CA glues. This extender tip can be used with all viscosities (Thin,Medium,Extra Thick) of cyanoacrylate that we offer from Bob Smith Industries™ and is compatible with both available sizes (1oz and 2oz) Extender tips can help you reach difficult spaces and control the flow of glue for more precise application.
  • Helps focus glue stream
  • Works with all three CA glue viscosities
  • Package of 6
package of 6
Please Log In to view prices
S-CMPX Polish - Lizard Spit, for guitar cleaning / polishing
Removes: Sweat, dirt, oil, smoke and spilled beer. Produces: Brilliant Shine. The World's Most Effective Guitar Polish! For best results use a clean Lizard Spit Micro Fiber polish cloth. Refrain from using a dirty cloth - it may scratch the surface.
Please Log In to view prices
S-CMATE Polish mate - Novus, cloths for polishing
Novus Plastic Polish Mates offer cloth-like softness in a disposable wiper. These wipers are highly absorbent, abrasion-resistant, low lint and extra durable. Package of 6 Mates. Using the wrong cloth when cleaning plastics can damage the surface. Standard paper toweling, polyester or rayon cloths can leave scratches in plastic. Alleviate this problem by using only NOVUS Plastic Polish Mates for all your plastic cleaning jobs. For best results, use with Novus Plastic Polishes No.1, No. 2, and No. 3
package of 6
Please Log In to view prices
S-CMP19 Refill Pack for Ultimate Fret Polishing System - Lizard Spit
This pack includes 24 fresh fret polishing pads for use with the Lizard Spit Ultimate Fret Polishing System, S-CMP15.
package of 24
Please Log In to view prices
S-CTO-15 Tool Oil - for Maintenance & Work
Multi-use tool oil for both maintaining and using tools. This rust-preventive oil can be used to lubricate tools such as hinges on pliers. It can also be used to thinly coat metal tools to avoid future corrosion. Additionally, it can be used as a cutting and filing lubricant when slotting a nut for a guitar, slotting bridge saddles, and other cutting purposes. The 15ml bottle features a needle dropper tip.
Please Log In to view prices
S-CSTW-1 Cloth - Shop Towels, Super Absorbant, Disposable, 55 Sheets
Strong, absorbent towels for auto and machine shops. Works like cloth for your tough jobs. Absorbs grease and oil, even when wet. Fits any standard paper towel dispenser. 11” x 9" sheets.
Please Log In to view prices
S-C217X Plastic Polish - Novus #2, fine scratch remover
Removes fine scratches, abrasions and haziness from plastic surfaces. Great for plastic radio dial windows. For best results, follow with Novus No. 1 polish.
Please Log In to view prices
S-F560 Adhesive Softener - Bob Smith Industries, Un-Cure
Un-Cure™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of Un-Cure™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastic parts with a razor saw is usually the best option. Works Well On:
  • Cyanoacrylates
  • Super Glues

Directions: Un-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water.
Please Log In to view prices
S-F562 Adhesive Remover - Bob Smith Industries, Insta-Clean
Insta-Clean™ is ideal for removing price stickers and their adhesive residue. Insta-Clean™ will also remove scuff marks that regular household cleaners won't touch. Works on all surfaces, including: glass, cardboard, plastic, fiberglass and everything else. Uses
  • Stickers
  • Sticker Residue
  • Residue on Glass
  • Residue on Fiberglass

Directions: Spray directly onto the sticker to be removed. Let stand for 1 to 5 minutes and then peel off sticker and wipe clean.
Please Log In to view prices
S-C215X Plastic Polish - Novus #3, heavy scratch remover
Removes scratches from acrylic surfaces; significantly reduces haziness. More abrasive than Novus #2 and is effective for deeper scratches. Treatment should be followed by Novus #2 to buff and polish surface.
Please Log In to view prices
S-CL260-X DeoxIT® - Caig, L260NP Grease (Formerly Cailube) Squeeze Tube
CAIG’s DeoxIT® L260 Grease is a lithium grease with unique additives to enable it to adhere and stay on the surfaces it is applied to. It has a tenacity to stick to surfaces. Additional additives allow it to displace moisture, prevent oxidation and corrosion and provides superior lubrication and protection. DeoxIT® L260 Grease’s unique properties allow it not only to be used on mechanical devices – also electrical devices and equipment; such as high powered switches, disconnects, connectors, relays and exposed connections in severe environments.
Please Log In to view prices
S-CD100L-B2C DeoxIT® for Batteries - Caig, cleaning kit
Simply clean the contacts with a drop of DeoxIT® and extend the life of batteries!
  • Dissolves oxidation & corrosion
  • Longer battery & device life
  • Revives your electronics
  • Safe and easy to use
Please Log In to view prices
S-C6582 String Cleaner - Dunlop, Ultraglide 65
Extend string life with Ultraglide 65!
Dunlop Ultraglide 65 String Cleaner and Conditioner is also known as “the squeak eliminator”. This is the #1 way to restore brilliance to your strings and increase string life. Ultraglide 65 conditions your strings with a silky smooth playing surface while shielding against tarnish and corrosion.
  • Protects against corrosion and tarnish
  • Increases string life
  • 2 oz applicator bottle
Please Log In to view prices
S-CD100L-2C DeoxIT® D100L - Caig, squeeze tube
DeoxIT® D100L squeeze tube chemically improves metal to metal connections and contacts.100% solution, 2 ml,(Applications = 50 ± drops, 0.04 ml/drop).
Please Log In to view prices
S-CMP04 Cloth - Lizard Spit, Micro Fiber for polishing
Baby blue micro fiber cloth for use with Lizard Spit or other polishing products.
Please Log In to view prices
S-C654 Guitar Polish - Dunlop, Formula 65 polish and cleaner
Get rid of the gunk! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand! Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use.
  • 4 oz. spray bottle
  • Polishes and protects
  • Will not build up
Please Log In to view prices