Maintenance Products

S-CF100L-L2C DeoxIT® Fader - Caig, Liquid squeeze tube
DeoxIT® cleaner and lubricant for conductive plastic faders and controls. Improves conductivity, maintains optimum signal quality, reduces wear and improves tactile feel - flushing action, safe on plastics. 2mL Squeeze Tube
Please Log In to view prices
S-CL260-X DeoxIT® - Caig, L260NP Grease (Formerly Cailube) Squeeze Tube
CAIG’s DeoxIT® L260 Grease is a lithium grease with unique additives to enable it to adhere and stay on the surfaces it is applied to. It has a tenacity to stick to surfaces. Additional additives allow it to displace moisture, prevent oxidation and corrosion and provides superior lubrication and protection. DeoxIT® L260 Grease’s unique properties allow it not only to be used on mechanical devices – also electrical devices and equipment; such as high powered switches, disconnects, connectors, relays and exposed connections in severe environments.
Please Log In to view prices
S-F560 Adhesive Softener - Bob Smith Industries, Un-Cure
Un-Cure™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of Un-Cure™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastic parts with a razor saw is usually the best option. Works Well On:
  • Cyanoacrylates
  • Super Glues

Directions: Un-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water.
Please Log In to view prices
S-C10-3702 Coating - GC Electronics, Q-Dope, 2 oz
Fast drying coating for coils and transformers. Clear, protective coating has minimal effect on inductive values. 2 oz.
Please Log In to view prices
S-CFN5S-2N DeoxIT® Fader FN5 - Caig, Mini Spray, 5%, 40g
DeoxIT® Fader FN5 is a non-flammable precision lubricant and cleaner for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions. FN5 lubricates and protects plastic to plastic and plastic to metal surfaces.
Please Log In to view prices
S-CMP12 Lubricator / Cleaner - Lizard Spit, for Strings, 1 ⅓ oz
  • Cleans and protects
  • Easier playing
  • Faster shredding

Cleans and protects all string materials, stops oxidation process, inhibits corrosion (rust) on phosphor-bronze, nickel, and stainless. Produces faster playing for easier shredding. Safe formula, will not harm fretboard surface. Safe for skin contact, non-allergenic, non-toxic and non-hazardous.
Please Log In to view prices
S-F510 Threadlocker - Bob Smith Industries, IC-LOC Blue
IC-LOC™ Blue is a medium thickness, medium strength thread lock that is applied to the threads of fasteners before assembly. Once the IC-LOC Blue™ is cured, the fasteners can be disassembled with standard hand tools if required. Uses
  • Threads of fasteners
  • Bolts
  • Screws
  • Nuts

Directions: Shake well, then apply IC-LOC™ Blue to the clean and dry threaded areas before assembling non-plastic parts. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Blue is anaerobic and cures in the absence of air, which occurs when a bolt, screw or nut is tightened. IC-LOC™ Blue prevents loosening of fasteners from normal use and vibration, but parts can still be disassembled with hand tools. IC-LOC™ Blue seals and prevents rusting of threads. Cured temperature range is -60° to +300°F (-51° to +149°C). Remove residue with a damp cloth. Similar to Loctite Blue.
Please Log In to view prices
S-F514 Threadlocker - Bob Smith Industries, IC-LOC Green
IC-LOC™ Green is a thin, medium-high strength threadlock that is applied to fasteners that are already assembled. IC-LOC™ Green wicks down into the threads of fasteners using capillary action and has good performance even with oil coated fasteners. Uses
  • Threads of fasteners
  • Bolts
  • Screws
  • Nuts

Directions: Shake well. Unscrew cap and cut off tip. Apply IC-LOC™ Green to clean preassembled fasteners. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Green prevents the loosening of threaded fasteners from shock and vibration by wicking into threads. Cured temperature range is -60° to +300°F (-51° to +149°C). Locked fasteners are only removable by localized heating and hand tools. Remove residue with a damp cloth. Similar to Loctite Green.
Please Log In to view prices
S-F570 Epoxy - Bob Smith Industries, Quik-Cure
Quik-Cure™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. Quik-Cure™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. Quik-Cure™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with Quik-Cure™ can be handled after 15 minutes. Full strength is reached in 1 hour. Works Best On:
  • Hard Wood
  • Glass & Metal

Works Well On:
  • Balsa Wood
  • Soft Wood
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • White Foam
  • Reinforcing

Directions: Quik-Cure™ 5 min.
Please Log In to view prices
S-CMATE Polish mate - Novus, cloths for polishing
Novus Plastic Polish Mates offer cloth-like softness in a disposable wiper. These wipers are highly absorbent, abrasion-resistant, low lint and extra durable. Package of 6 Mates. Using the wrong cloth when cleaning plastics can damage the surface. Standard paper toweling, polyester or rayon cloths can leave scratches in plastic. Alleviate this problem by using only NOVUS Plastic Polish Mates for all your plastic cleaning jobs. For best results, use with Novus Plastic Polishes No.1, No. 2, and No. 3
package of 6
Please Log In to view prices
S-CMP13B Polish - Lizard Spit, Scratch and Scuff Remover
Lizard Spit two-step scratch and scuff remover.
  • Biodegradable
  • Made In USA

Includes:
  • Step 1- Scratch and Scuff Remover
  • Step 2- Scratch and Scuff Finisher
package of 2
Please Log In to view prices
S-C215X Plastic Polish - Novus #3, heavy scratch remover
Removes scratches from acrylic surfaces; significantly reduces haziness. More abrasive than Novus #2 and is effective for deeper scratches. Treatment should be followed by Novus #2 to buff and polish surface.
Please Log In to view prices
S-CDFG-213-1 DeoxIT® Fader Grease - Caig, for lubricating electronics
DeoxIT® FaderGrease was specifically formulated to improve conductivity and lubricate conductive plastic and carbon compound faders, switches and other mechanisms with sliding surfaces. Provides clearer audio, clearer video, and reliable data. Over time these components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, smoke, drink spills and other contamination also degrade the components' lubricant. Re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces. 28 grams
Please Log In to view prices
S-CDDW-V611 Degreaser Wash - Caig, for cleaning electronic equipment
Caig Heavy Duty Electronic Cleaner cleans electronic equipment and parts.
  • 5.5 oz can
  • Safe on Most Plastics
  • Non-Corrosive
  • Fast Drying, Zero Residue
  • Non-Ozone Depleting
  • VOC Complaint
Please Log In to view prices
S-CG100L-2C DeoxIT® Gold - Caig, Squeeze Tube applicator
DeoxIT® GOLD G100L (formerly ProGold), Squeeze Tube, 100% solution, 2 mL, (Applications = 50 ± drops, 0.04 ml/drop)
Please Log In to view prices
S-CSK-GXMD Vacuum Tube Survival Kit - Caig, DeoxIT® Gold
The Caig DeoxIT® Gold GxMD Vacuum Tube Survival Kit includes everything you need to properly clean the pins of vacuum tubes and tube sockets.
Please Log In to view prices
S-CTO-15 Tool Oil - for Maintenance & Work
Multi-use tool oil for both maintaining and using tools. This rust-preventive oil can be used to lubricate tools such as hinges on pliers. It can also be used to thinly coat metal tools to avoid future corrosion. Additionally, it can be used as a cutting and filing lubricant when slotting a nut for a guitar, slotting bridge saddles, and other cutting purposes. The 15ml bottle features a needle dropper tip.
Please Log In to view prices
S-C6500 Maintenance Kit - Dunlop, Guitar care products
Everything you need to do a deep clean and polish on your guitar’s fingerboard, finish, and strings.The Dunlop System 65 Guitar Maintenance Kit will help you keep your guitar in top notch condition. Set includes the following:
  • Bodygloss 65 Cream of Carnauba polishes, protects, and beautifies
  • Formula No. 65 cleaner/polish shines up your guitar’s body while eliminating any built up grime.
  • Ultraglide 65 String Cleaner/Conditioner cleans your strings and extends string life while eliminating string squeaks.
  • Fingerboard 01 Cleaner and Prep dissolves away unwanted dirt and residue from your fingerboard
  • Fingerboard 02 Deep Conditioner replenishes your fingerboard with natural protective oils.
  • Also includes 2 microfiber cleaning cloths, a micro fine fret polishing cloth, and a complete step-by-step guitar guide

Give your guitar some top level love!
package of 5
Please Log In to view prices
S-F550-X Adhesive - Bob Smith Industries, Super-Gold+
Super-Gold+™ is foam-safe, odorless super glue. Super glues can produce fumes that can be irritating to the eyes and nose. While not toxic, some people can become sensitized to these fumes. Super-Gold+™ is BSI’s odorless form of Cyanoacrylate that gives the same high performance characteristics as BSI’s Insta-Cure+ without the irritating fumes. Super-Gold+ will not fog clear plastic and glass, which can occur with the use of standard Cyanoacrylates. It can also be used on all foams.
Please Log In to view prices
S-C6567 Superlube Gel Pen - Dunlop, System 65
Keep everything moving smoothly on your guitar with the Superlube Gel Pen. A flexible spatula tip helps to control where the lube goes for an easy application. Be it saddles, nut slots, tremolo parts, or elsewhere, this lubricant is safe for all stringed instrument maintenance.
Please Log In to view prices
S-CGBCP01 Care Pack - Lizard Spit, for Guitar / Bass
This Lizard Spit Guitar and Bass Care Pack contains 4 oz. Fretboard Conditioner, 4 oz. Guitar Polish, and a Lizard Spit Micro Fiber Cloth, everything you need to keep your guitar or bass in good condition and looking brand new!
Please Log In to view prices
S-TMIX-1 Container - for mixing and measuring, 1 Quart
1 quart mixing container. Quickly measure and mix paints, chemicals and adhesives. Clearly marked graduations for quick measuring. Made of translucent high-density polyethylene. Optional lid S-TMIX-1-LID (sold separately) seals the container and prevents spills.
Please Log In to view prices
S-CCW100P Pen - Caig, Circuit writer, for drawing traces
Circuit Writer precision conductive ink dispenser makes instant traces on most surfaces (epoxy, glass, metal). Draw traces on circuit boards, repair defective traces, make jumpers and shield electronics, design prototype circuits, repair rear-window heater traces. Silver based solution, 7ml pen dispenser.
Please Log In to view prices
S-CGG-1 Adhesive Remover - Goo Gone, Original, 8 fl. oz.
Remove sticky, greasy messes with Goo Gone Original and return your surfaces to their original condition. Works on adhesive, crayon, gum, glue.
  • Surface safe - formula will not harm your surfaces
  • Removes tape - excellent for removing tape from your surfaces
  • Perfect for cleaning - great for cleaning clothing, dinnerware and tables
  • Removes stickers- great for removing stickers from gifts or even cars
  • Use on - adhesive, gum, crayon, glue
Please Log In to view prices