Pen - Caig, Circuit writer, for drawing traces
Circuit Writer precision conductive ink dispenser makes instant traces on most surfaces(epoxy, glass, metal). Draw traces on circuit boards, repair defective traces, make jumpers and shield electronics, design prototype circuits, repair rear-window heater traces. Silver based solution, 7ml pen dispenser.
DeoxIT® Fader F100 - Caig, 100% spray
DeoxIT® Fader Spray (formerly CaiLube MCL, MCL100S-L2) is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.
Vacuum Tube Survival Kit - Caig, DeoxIT® Gold
The Caig DeoxIT® Gold GxMD Vacuum Tube Survival Kit includes everything you need to properly clean the pins of vacuum tubes and tube sockets.
Guitar Polish - Dunlop, Formula 65 polish and cleaner
Get rid of the gunk! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand! Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use.
- 4 oz. spray bottle
- Polishes and protects
- Will not build up
DeoxIT® Fader Grease - Caig, for lubricating electronics
DeoxIT® FaderGrease was specifically formulated to improve conductivity and lubricate conductive plastic and carbon compound faders, switches and other mechanisms with sliding surfaces. Provides clearer audio, clearer video, and reliable data. Over time these components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, smoke, drink spills and other contamination also degrade the components' lubricant. Re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces. 28 grams
Coating - GC Electronics, Q-Dope, 2 oz
Fast drying coating for coils and transformers. Clear, protective coating has minimal effect on inductive values. 2 oz.
DeoxIT® - Caig, DN5 Spray, Perfect Straw
DeoxIT® DN5 Spray, 5% solution. Chemically improves metal to metal connections and contacts. Dissolves corrosion, improves contact, and protects surfaces
Brushes - Caig, for connector cleaning, package of 25
Package of 25Nylon brush for cleaning contacts and connectors. Ideal for phone and phono(RCA), XLR, coax connectors and patchbays. Package of 25
DeoxIT® - Caig, D5 pump spray can, 25%
DeoxIt Pump Spray 25% concentrate solution. Non-flammable. 150ml. May be shipped by air to US and other countries. DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion. DeoxIT® D5 is safe on plastics.
Cleaner - Color Bond, paint prep for leather or plastic
4 oz. of cleaner that mixes with a gallon of water to prepare upholstery for use with S-CCOLORBOND-BLK. Successfully painting your leather or plastic requires careful paint prep and ColorBond's Prep Cleaner is one product you should have. A Liquid non-solvent, aqueous-based cleaner, Prep Cleaner removes dirt, grime and oil when readying surfaces for paint. Great for everything from leather to soft plastics, it's been engineered to remove compounds and releasing agents that typically spoil most paint jobs. When it's time for leather or plastic paint prep, ColorBond Prep Cleaner will leave you with a clean surface ready for paint. Recommended for use before the application of all ColorBond products.
Membrane repair - Caig, Caikote 44 carbon coating
Conductive Carbon Coating for most surfaces (rubber, epoxy, glass, plastic). It is ideal for repairing membrane buttons, keyboard buttons, and other carbon based surfaces. It may also be used as a coating for shielding (EMI) of electronics. Similar products on the market are more expensive, and have multiple containers requiring mixing prior to application. The CaiKoteTM 44 is applied in one step, allowed to dry and is ready for service.
Flux Wash - Caig, for cleaning flux / silicon / oil
Caig Flux Wash cleans and removes fluxes, light oils, and silicon.
Val-U Series Spray, adjustable valve, 5.5 oz.
- Safe on most plastics
- Evaporates quickly
- Removes wax and grease
Val-U Series Spray, adjustable valve, 5.5 oz.
Solvent - Silicone Rubber Adhesive, IS-808, clear
Momentive clear IS808 adhesive sealant is compatible with rubber materials with a 24 hr cure time. Provides a 25 min fixture time. Delivers great performance with a shear strength of 150 psi, tensile strength of 300 psi and peel strength of 37 psi. Made in the USA.
Polish - Lizard Spit, Scratch and Scuff Remover
Package of 2Lizard Spit two-step scratch and scuff remover.
- Made In USA
- Step 1- Scratch and Scuff Remover
- Step 2- Scratch and Scuff Finisher
Adhesive - Bob Smith Industries, Insta-Set Foam, Pump Spray
Bob Smith Industries INSTA-SET™ CA (super glue) Accelerator. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
- Convenient pump spray (2oz.
DeoxIT® - Caig, L260NP Grease (Formerly Cailube) Squeeze Tube
CAIG’s DeoxIT® L260 Grease is a lithium grease with unique additives to enable it to adhere and stay on the surfaces it is applied to. It has a tenacity to stick to surfaces. Additional additives allow it to displace moisture, prevent oxidation and corrosion and provides superior lubrication and protection. DeoxIT® L260 Grease’s unique properties allow it not only to be used on mechanical devices – also electrical devices and equipment; such as high powered switches, disconnects, connectors, relays and exposed connections in severe environments.
DeoxIT® - Caig, D100L Brush Applicator
DeoxIT® D100L Brush Applicator, 100% solution, 7.4 ml, (Applications = 500 ± brush strokes, 10mm long).
Plastic polish - Novus, full plastic treatment / restoration kit
Package of 3By using this kit and few simple techniques, you can actually add life to plastic and keep it looking new. Best of all, you don't have to be a pro to get professional results. No. 3 removes heavy scratches, and No. 2 polishes out lighter imperfections. After removing the abrasions with No. 3 and No. 2, apply No. 1 to clean and shine plastic. Three-step system provides a clean, highly polished static- and dust-free surface.
DeoxIT® D100L - Caig, squeeze tube
DeoxIT® D100L squeeze tube chemically improves metal to metal connections and contacts.100% solution, 2 ml,(Applications = 50 ± drops, 0.04 ml/drop).
Polish mate - Novus, cloths for polishing
Package of 6Novus Plastic Polish Mates offer cloth-like softness in a disposable wiper. These wipers are highly absorbent, abrasion-resistant, low lint and extra durable. Package of 6 Mates. Using the wrong cloth when cleaning plastics can damage the surface. Standard paper toweling, polyester or rayon cloths can leave scratches in plastic. Alleviate this problem by using only NOVUS Plastic Polish Mates for all your plastic cleaning jobs. For best results, use with Novus Plastic Polishes No.1, No. 2, and No. 3
DeoxIT® Fader - Caig, Liquid squeeze tube
DeoxIT® cleaner and lubricant for conductive plastic faders and controls. Improves conductivity, maintains optimum signal quality, reduces wear and improves tactile feel - flushing action, safe on plastics. 2mL Squeeze Tube
DeoxIT® Gold G5 - Caig, spray applicator
DeoxIT® GOLD (formerly ProGold), is a unique conditioning solution that improves conductivity and provides long-lasting protection on gold, base metals and other precious metal contacts and connections (gold, silver, rhodium, copper, bronze, nickel, etc.).Use on plated connectors, contacts and metal surfaces for maximum performance and protection. Recommended for critical applications where only slight cleaning action is necessary. If the surface looks clean, applying DeoxIT® contact cleaner first is usually not necessary. DeoxIT® GOLD is designed to dissolve small amounts of oxidation.
Plastic Polish - Novus #3, heavy scratch remover
Removes scratches from acrylic surfaces; significantly reduces haziness. More abrasive than Novus #2 and is effective for deeper scratches. Treatment should be followed by Novus #2 to buff and polish surface.
Guitar Polish & Cloth - Dunlop, Formula 65, Microfiber
Formula No. 65 Polish and Cleaner with a microfiber cloth! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand . And while you’re at it why not grab a nice microfiber cleaning cloth to go along with it? Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use. Includes:
- (1) 4 oz. bottle of Dunlop Formula No. 65
- (1) microfiber cleaning cloth