Maintenance Products

Brushes - Caig, for connector cleaning, package of 100
Nylon brush for cleaning contacts and connectors. Ideal for phone and phono(RCA), XLR, coax connectors and patchbays. Package of 100
package of 100
Please Log In to view prices
Brushes - Caig, for connector cleaning, package of 25
Nylon brush for cleaning contacts and connectors. Ideal for phone and phono(RCA), XLR, coax connectors and patchbays. Package of 25
package of 25
Please Log In to view prices
Cleaner - Caig, Contact Cleaner Wash
Contact Cleaner Wash, Val-U Series Spray, adjustable valve, 5.5 oz., fast evaporating and safe on plastics.
Used for switches/relays, contacts/connectors, and parts/components.
Please Log In to view prices
Cloth - Caig, Lint-free Cotton, set of 50
Lint-Free Cloth, cotton, 2.25" x 4.5", package of 50.
package of 50
Please Log In to view prices
Coating - GC Electronics, Q-Dope, 2 oz
Fast drying coating for coils and transformers. Clear, protective coating has minimal effect on inductive values. 2 oz.
Please Log In to view prices
Corona Dope - GC Electronics, lacquer coating, 2 oz.
Corona Dope is useful for insulating components, circuits and assemblies. It has high dielectric strength and is especially useful where high voltages are involved. Also has excellent arc and corona resisting properties and protects surfaces against moisture. Cures in 20 minutes at room temperature. GC Electronics Corona Dope is commonly used to reseal flyback transformers and other parts on CRT monitors and displays.
  • Color: Black
  • Specific Gravity: 0.9
  • Dielectric Strength: 3800 V/Mil
  • Softening Point: 180°C to 190°C
  • Temperature Range: Up to 340°F
  • Viscosity @ 25°C: 220 cps
Please Log In to view prices
Degreaser Wash - Caig, for cleaning electronic equipment
Caig Heavy Duty Electronic Cleaner cleans electronic equipment and parts.
  • 5.5 oz can
  • Safe on Most Plastics
  • Non-Corrosive
  • Fast Drying, Zero Residue
  • Non-Ozone Depleting
  • VOC Complaint
Please Log In to view prices
DeoxIT® - Caig, Connector & Contact Treatments kit
Special Order Item
DeoxIT® connector and contact treatments kit improves performance and reliability on all parts and equipment.
Please Log In to view prices
DeoxIT® - Caig, D100L Brush Applicator
DeoxIT® D100L Brush Applicator, 100% solution, 7.4 ml, (Applications = 500 ± brush strokes, 10mm long).
Please Log In to view prices
DeoxIT® - Caig, D5 pump spray can, 25%
DeoxIt Pump Spray 25% concentrate solution. Non-flammable. 150ml. May be shipped by air to US and other countries. DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion. DeoxIT® D5 is safe on plastics.
Please Log In to view prices
DeoxIT® - Caig, D5 Spray, Low-Medium-High Spray
DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion.
Please Log In to view prices
DeoxIT® - Caig, DN5 Spray, Perfect Straw
DeoxIT® DN5 Spray, 5% solution. Chemically improves metal to metal connections and contacts. Dissolves corrosion, improves contact, and protects surfaces
Please Log In to view prices
DeoxIT® - Caig, L260NP Grease (Formerly Cailube) Squeeze Tube
CAIG’s DeoxIT® L260 Grease is a lithium grease with unique additives to enable it to adhere and stay on the surfaces it is applied to. It has a tenacity to stick to surfaces. Additional additives allow it to displace moisture, prevent oxidation and corrosion and provides superior lubrication and protection. DeoxIT® L260 Grease’s unique properties allow it not only to be used on mechanical devices – also electrical devices and equipment; such as high powered switches, disconnects, connectors, relays and exposed connections in severe environments.
Please Log In to view prices
DeoxIT® - Caig, Liquid, 5%, 118 mL
Applicator: Bottle, provides flushing action, applies 5% DeoxIT®. Formulation: 5% DeoxIT®, petroleum naphtha, 3M Novec 7100. Use: When contact and connector are easily accessible. Provides flushing action. Notes: Use sparingly on surfaces. When over spray is an issue, apply to lint-free cloth or swab and dab connections.. Formulation safe on plastics. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT®. More than a Contact Cleaner . . . Improves & Protects Connections! DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts. Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion.
Please Log In to view prices
DeoxIT® - Caig, pen, 7 ml, 100% solution
Special Order Item
The pen applicator gives you more control over the regular spray. Contains DeoxIT® 100% solution. No solvent. 7 ML of solution. The 5% solutions contain petroleum naphtha as the carrier solvent, the 100% solutions, i.e. pens, do not contain a solvent.
Please Log In to view prices
DeoxIT® - Caig, Shield SN5 Spray, 5% solution
DeoxIT® SHIELD S5 Spray (formerly PreservIT P5S-6), 5% solution, flushing action, 142 g, (Applications = 1200 ±). Seals, lubricates and protects metal surfaces against oxidation and contamination. Use on clean/new surfaces or those precleaned with DeoxIT® D-Series contact cleaner.
Please Log In to view prices
DeoxIT® - Caig, Wipes, 100% solution, set of 50
DeoxIT® Wipes, 100%, 50 individual wipes, zip-lock bag
package of 50
Please Log In to view prices
DeoxIT® D100 Spray - Caig, 100% solution
DeoxIT® D100 Spray, 100% solution. Chemically improves metal to metal connections and contacts. Dissolves corrosion, improves contact, and protects surfaces
Please Log In to view prices
DeoxIT® D100L - Caig, squeeze tube
DeoxIT® D100L squeeze tube chemically improves metal to metal connections and contacts.100% solution, 2 ml,(Applications = 50 ± drops, 0.04 ml/drop).
Please Log In to view prices
DeoxIT® D100L Liquid - Caig, needle dispenser
DeoxIT® D100L Liquid, 100% solution. Chemically improves metal to metal connections and contacts. Dissolves corrosion, improves contact, and protects surfaces
Please Log In to view prices
DeoxIT® D5 - Caig, Mini Spray, 5%, 24g
The popular DeoxIT D5 contact cleaner & rejuvenator is now available in a mini spray can. DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion. This mini can comes with an attachable straw that fits in the adjustable spray nozzle for a controlled flushing action. DeoxIT® D5 is safe on plastics. Key Features:
  • Improves Conductivity
  • Deoxidizes, Cleans and Preserves
  • Reduces Intermittent Connections
  • Reduces Arcing & RFI
  • Reduces Wear & Abrasion
  • Temperature Range, -34 C (-29 F) to +200 C (400 F)
Please Log In to view prices
DeoxIT® Fader - Caig, Liquid squeeze tube
DeoxIT® cleaner and lubricant for conductive plastic faders and controls. Improves conductivity, maintains optimum signal quality, reduces wear and improves tactile feel - flushing action, safe on plastics. 2mL Squeeze Tube
Please Log In to view prices
DeoxIT® Fader F100 - Caig, 100% spray
DeoxIT® Fader Spray (formerly CaiLube MCL, MCL100S-L2) is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.
Please Log In to view prices
DeoxIT® Fader F100L Liquid - Caig, Needle Dispenser
100% DeoxIT® Fader F100L liquid in a 25 mL needle dispenser bottle for precision application. F100L is a moving contact lubricant for conductive plastic faders and controls. It contains no solvents. DeoxIT® Fader F-Series is a precision lubricant and cleaner for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions. Over time these conductive plastic components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, drink spills and other contamination also degrade the components’ lubricant. The need for re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces. Another use for DeoxIT® Fader is on conductive membrane switches and components.
Please Log In to view prices