Maintenance Products

Lubrication - Lizard Spit, Slick Nutz Slot Lube, 1 oz.
Nut slot graphite lubricant. Doesn't collect dust or absorb sound. Self drying, all natural, non-petroleum, non-toxic
Please Log In to view prices
Adhesive - Bob Smith Industries, Insta-Cure Super Thin
Bob Smith Industries™ Insta-Cure™ Super Thin Cyanoacrylate. A must have for luthiers! Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds (1-3 sec.). Surfaces to be bonded must be tight fitting (no visible gaps) and should be held together or clamped while you apply the CA around the edges of the seam. For glue applications with small gaps or looser fitting joints the higher viscosity Insta-Cure+™ is recommended.
  • Water-thin consistency
  • 1-3 second cure time
  • For tight fitting applications
  • Available in 1oz. and 2oz. sizes

WARNING: These products are eye and respiratory irritants. Product can bond skin instantly. Keep away from children!
Please Log In to view prices
Ultimate Fret Board Polishing System - Lizard Spit
Designed to polish all types of fret wire. Includes 24 × polish pads, 2 × fretboard guards, 1 × finishing cloth
Please Log In to view prices
Adhesive - Bob Smith Industries, Insta-Cure Gap Filling
Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must have for luthiers! Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps or the parts to be glued don’t fit perfectly. Medium viscosity super glue is the most common glue used in many luthiery applications due to it’s cure time and viscosity. Recommended for binding repair and small poly finish touch ups. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. To speed up curing time use the Insta-Set accelerator!
Please Log In to view prices
Polish - Lizard Spit, for guitar cleaning / polishing
Removes: Sweat, dirt, oil, smoke and spilled beer. Produces: Brilliant Shine. The World's Most Effective Guitar Polish! For best results use a clean Lizard Spit Micro Fiber polish cloth. Refrain from using a dirty cloth - it may scratch the surface.
Please Log In to view prices
Adhesive - Bob Smith Industries, Extender Tip for Glue
Package of 6
Bob Smith Industries ™ Extender Tip for CA glues. This extender tip can be used with all viscosities (Thin,Medium,Extra Thick) of cyanoacrylate that we offer from Bob Smith Industries™ and is compatible with both available sizes (1oz and 2oz) Extender tips can help you reach difficult spaces and control the flow of glue for more precise application.
  • Helps focus glue stream
  • Works with all three CA glue viscosities
  • Package of 6
Please Log In to view prices
Lubrication - Dr. Duck's, Ax Wax & String Lube, Organic
For use on the entire fretboard, headstock, front,sides, back and pickguards. Also cleans and lubes bridge saddles, fine tuners on locking tremolo systems, tuning machine knobs and posts. US made with US materials, 4 oz.
Please Log In to view prices
String Cleaner - Dunlop, Ultraglide 65
Extend string life with Ultraglide 65!
Dunlop Ultraglide 65 String Cleaner and Conditioner is also known as “the squeak eliminator”. This is the #1 way to restore brilliance to your strings and increase string life. Ultraglide 65 conditions your strings with a silky smooth playing surface while shielding against tarnish and corrosion.
  • Protects against corrosion and tarnish
  • Increases string life
  • 2 oz applicator bottle
Please Log In to view prices
Fretboard Cleaner - Dunlop, Formula 65 Lemon Oil
Make your fretboard happy!
Keep fretboards clean and avoid cracking and drying by conditioning them with Dunlop Fretboard 65 Ultimate Lemon Oil.
Dunlop Fretboard 65 Ultimate Lemon Oil will remove grime and return your fretboard to it’s original luster quickly and easily. And once the dirt and grime are gone Fretboard 65 will keep it away by providing an invisible sealant against stains and moisture.
*Note* - Not for use on maple fretboards.
  • Protects your fretboard from cracking and drying
  • Moisturizes your fretboard
  • Removes dirt, grime, and grease
  • 4 oz. bottle
Please Log In to view prices
Adhesive - Bob Smith Industries, Maxi-Cure Extra Thick
Bob Smith Industries ™ Maxi Cure ™ Extra Thick Gap Filling Cyanoacrylate. A must have for luthiers! Maxi Cure ™ is the highest viscosity CA we have available and is great for extreme gap filling and finish fills. It can be carved with a knife or razor blade and sanded and feathered to form a finish which makes it great for chip repairs. The extra thick viscosity of Maxi Cure ™ also allows longer repositioning time than other glues (10-25 sec.) Apply Maxi Cure ™ in a coil pattern to one of the parts to be glued, spread glue evenly, then assemble parts. Hold or clamp firmly for 30-60 seconds. To speed up curing time use the Insta-Set accelerator! (S-F506)
Please Log In to view prices
Guitar Polish - Dunlop, Formula 65 polish and cleaner
Get rid of the gunk! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand! Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use.
  • 4 oz. spray bottle
  • Polishes and protects
  • Will not build up
Please Log In to view prices
Adhesive - Bob Smith Industries, Insta-Set Foam, Pump Spray
Bob Smith Industries INSTA-SET™ CA (super glue) Accelerator. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
  • Convenient pump spray (2oz.
Please Log In to view prices
Fretboard Conditioner - Lizard Spit, 4 oz.
Removes dirt and stains and slows oxidation of frets. Protects against drying and cracking by moisturizing and conditioning to preserve fret board life. Use Lizard Spit Guitar Polish for finished surfaces.
Please Log In to view prices
Plastic Polish - Novus #2, fine scratch remover
Removes fine scratches, abrasions and haziness from plastic surfaces. Great for plastic radio dial windows. For best results, follow with Novus No. 1 polish.
Please Log In to view prices
Polish - Lizard Spit, Scratch and Scuff Remover
Package of 2
Lizard Spit two-step scratch and scuff remover.
  • Biodegradable
  • Made In USA

Includes:
  • Step 1- Scratch and Scuff Remover
  • Step 2- Scratch and Scuff Finisher
Please Log In to view prices
Refill Pack for Ultimate Fret Polishing System - Lizard Spit
Package of 24
This pack includes 24 fresh fret polishing pads for use with the Lizard Spit Ultimate Fret Polishing System, S-CMP15.
Please Log In to view prices
Threadlocker - Bob Smith Industries, IC-LOC Blue
IC-LOC™ Blue is a medium thickness, medium strength thread lock that is applied to the threads of fasteners before assembly. Once the IC-LOC Blue™ is cured, the fasteners can be disassembled with standard hand tools if required. Uses
  • Threads of fasteners
  • Bolts
  • Screws
  • Nuts

Directions: Shake well, then apply IC-LOC™ Blue to the clean and dry threaded areas before assembling non-plastic parts. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Blue is anaerobic and cures in the absence of air, which occurs when a bolt, screw or nut is tightened. IC-LOC™ Blue prevents loosening of fasteners from normal use and vibration, but parts can still be disassembled with hand tools. IC-LOC™ Blue seals and prevents rusting of threads. Cured temperature range is -60° to +300°F (-51° to +149°C). Remove residue with a damp cloth. Similar to Loctite Blue.
Please Log In to view prices
Adhesive Remover - Bob Smith Industries, Insta-Clean
Insta-Clean™ is ideal for removing price stickers and their adhesive residue. Insta-Clean™ will also remove scuff marks that regular household cleaners won't touch. Works on all surfaces, including: glass, cardboard, plastic, fiberglass and everything else. Uses
  • Stickers
  • Sticker Residue
  • Residue on Glass
  • Residue on Fiberglass

Directions: Spray directly onto the sticker to be removed. Let stand for 1 to 5 minutes and then peel off sticker and wipe clean.
Please Log In to view prices
Polish mate - Novus, cloths for polishing
Package of 6
Novus Plastic Polish Mates offer cloth-like softness in a disposable wiper. These wipers are highly absorbent, abrasion-resistant, low lint and extra durable. Package of 6 Mates. Using the wrong cloth when cleaning plastics can damage the surface. Standard paper toweling, polyester or rayon cloths can leave scratches in plastic. Alleviate this problem by using only NOVUS Plastic Polish Mates for all your plastic cleaning jobs. For best results, use with Novus Plastic Polishes No.1, No. 2, and No. 3
Please Log In to view prices
Cloth - Lizard Spit, Micro Fiber for polishing
Baby blue micro fiber cloth for use with Lizard Spit or other polishing products.
Please Log In to view prices
Adhesive Softener - Bob Smith Industries, Un-Cure
Un-Cure™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of Un-Cure™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastic parts with a razor saw is usually the best option. Works Well On:
  • Cyanoacrylates
  • Super Glues

Directions: Un-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water.
Please Log In to view prices
Plastic Polish - Novus #1, plastic clean and shine
Cleans and glazes plastic surface polish out and protect against small scratches, finger markings, dust build-up, and other markings. Significantly reduces haziness and is anti-static.
Please Log In to view prices
Guitar Polish & Cloth - Dunlop, Formula 65, Microfiber
Formula No. 65 Polish and Cleaner with a microfiber cloth! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand . And while you’re at it why not grab a nice microfiber cleaning cloth to go along with it? Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use. Includes:
  • (1) 4 oz. bottle of Dunlop Formula No. 65
  • (1) microfiber cleaning cloth
Please Log In to view prices
Plastic polish - Novus, full plastic treatment / restoration kit
Package of 3
By using this kit and few simple techniques, you can actually add life to plastic and keep it looking new. Best of all, you don't have to be a pro to get professional results. No. 3 removes heavy scratches, and No. 2 polishes out lighter imperfections. After removing the abrasions with No. 3 and No. 2, apply No. 1 to clean and shine plastic. Three-step system provides a clean, highly polished static- and dust-free surface.
Please Log In to view prices