Luthier Parts & Tools

Tremolo tension springs. Similar to P-GTSPRN-5 but generic manufacture.

U.S. made threaded posts for ABR-1 bridges. The brass posts feature a high quality plating and a #6-32 threading. Each post is 1 1/16” in length. This vintage style of post is meant to mount directly to the body of the guitar.

U.S. made replacement retaining wire for wired ABR-1 bridges. Made of high quality spring steel. Fits our U.S. made bridges as well as Gibson spec bridges.

U.S. made vintage style ABR-1 thumbwheels. These steel thumbwheels feature high quality plating and are tapped for 6-32 threaded posts.

Genuine Fender® vintage-style Strat bridge mounting screws. Some of Fender’s most requested replacement screws. Made for Fender® and used on a variety of vintage and contemporary models.

• Set of 12 replacement screws
• Genuine vintage specifications
• Nickel plating
• Phillips oval-head (#6 x 1 1/8")
• Used on American Vintage Stratocaster® guitars

Get better leverage and grip on your whammy bar by replacing the plastic tip, package of two. 10-32 thread size.

Set of seven slotted bridge pins for use with most Fender acoustic guitars as well as other manufacturers. Includes extra bridge pin and matching strap end pin.

Set of hex set screws used for saddle-height adjustment on American Vintage series Stratocaster and Telecaster bridges.

• Set of 12 hex set screws
• For American Vintage Stratocaster and Telecaster guitars
• Comes with four 4-40 x 3/8" hex screws and eight 4-40 x 5/16" hex screws.

Original Fender® inserts for American Standard Tremolo, set of 2.

Tremolo Arm, Screw-Down, Steel 5mm-0.8p

• Material: Steel 5mm
• Handle Type: Screw-down
• Vintage Thread: M5.0 - 0.8p
• Plating: Chrome
• Tip: White

High quality bone saddle blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance. Measures 83 mm x 12 mm x 6 mm. Sold individually.

U.S. made bridge posts for Nashville style bridges. These bridge posts are made of solid brass and are finished with a high quality plating. Matching anchors are included. Note: These posts have 4.95mm diameters. Check your bridge for compatibility.

This spring helps set your tremolo arm in a fixed position when used with any Fender® American series or American Standard series tremolo. Simply insert spring into tremolo arm receptacle prior to installing tremolo arm. Package includes twelve tension springs. Used in Custom Shop, American Series, American Vintage, American Standard (USA), and Classic, Deluxe, and Road Worn® Series (Mexico) instruments.

Brass tremolo stopper. Used as a floating bridge stop for Fender and Floyd Rose style tremolo systems. Prevents inadvertent vibrato effects produced by resting the picking hand over the bridge while playing. Allows for down-bends and prevents up-bends for a stabilized return of the whammy bar. Allen screw can be easily reversed to allow for a floating bridge setup again. Includes: (1) brass block (1.05" L x .39" W x .49" H) (1) allen key, 2 mm (1) allen screw (M4 x .70 thread, 20 mm length) (1) hex nut (M4 x .70 thread) (2) countersunk mounting screws (10 mm length)

Set of five Stratocaster® tremolo tension springs for use on American Vintage series and Custom Shop instruments.

• Set of five nickel-plated steel tremolo tension springs
• For American Vintage series and Custom Shop instruments

Tremolo arm with white tip, for use on Mexican Standard and most Standard and Deluxe series Stratocaster models manufactured from 1986-present.

The Vibramate Mini Super Grip is custom made specifically to fit the arm of locking tremolo systems (like Floyd Rose). The textured design adds contour to the overall grip and a soft comfortable feel for subtle vibrato techniques. The Vibramate Super Grip easily slides onto your existing tremolo arm without any modifications or special tools. The tapered design ensures a snug fit once installed but can be removed just as easily by sliding it back off. Made in USA.

Original Fender® set of two threaded steel bridge-pivot screws used to mount two-point synchronous tremolo systems on American, Ultra, and American Standard Stratocaster® models (and some Custom Shop Stratocaster models) manufactured from 1986-present.
Features:

• Set of two threaded steel bridge-pivot mounting screws
• For American, Ultra, American Standard and some Custom Shop Stratocaster models (1986-present).

Genuine replacement arm for the Wilkinson/Gotoh VS-100N Tremolo. Internally threaded, sturdy knobless .216"-diameter (5.5mm) stainless steel; extends approximately 5-⅝" (142.88mm). Sturdy VS-100N tremolo arm. Multiple color options available.

Genuine Gotoh replacement tremolo arm for GE101TS

• Chrome with black tip
• #10-32 thread

Genuine Bigsby mounting screws pack. This pack comes with a variety of Bigsby screws common to many of their tremolo units. Item Qty BigSby Part Number Body Mount Screws 4 0495-1927 Hinge Mount Screws 4 0495-1923 Handle Bracket Set Scre 2 0495-1931

Original Fender® Stratocaster tremolo arm (also known as "whammy bar"). Includes one tremolo arm with a white and an aged tremolo knob.
Fits most American Series and American Standard (USA) instruments manufactured from '86-Present. Tremolo arm threading is the same as American Vintage models.

The PQ-9200-C0 is a great option to replace or upgrade the saddle on your Taylor acoustic as well as many other popular guitars. It is compensated to help improve the playability of your guitar.
Dimensions:

• Length - 2.8 in. (71.12mm)
• Width - 0.22 in. (3.1mm)
• Height - 0.392 in. (9.99mm)

The PQ-9280-C0 is a great option to replace or upgrade the saddle on your acoustic guitar. It is our most popular saddle and will work with many other guitars. It is 1/8" thick and is compensated to help improve the playability of your guitar. Dimensions:

• Length - 2.88 in. (73.15mm)
• Width - 0.128 in. (3.25mm)
• Height - 0.43 in. (10.92mm)