Luthier Parts & Tools

High quality made in Japan spoon-shaped gouges for luthier work. These gouges have a hardness of HRC64 and a total length of 180mm. The hardwood handle features a flat end for hammering and a decorative handle. The blade material is Shiragami white steel.

Formula No. 65 Polish and Cleaner with a microfiber cloth! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand . And while you’re at it why not grab a nice microfiber cleaning cloth to go along with it? Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use. Includes:

• (1) 4 oz. bottle of Dunlop Formula No. 65
• (1) microfiber cleaning cloth

Get rid of the gunk! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand! Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use.

• 4 oz. spray bottle
• Polishes and protects
• Will not build up

Work on your guitars without the worry of scratching the finish. This thick neoprene mat measures 17 7/8” x 23 ¾”. The tight webbing on the surface ensures no marring and helps keep debris from sticking to the mat.

Genuine Bigsby® Chet Atkins complete handle assembly for use with Bigsby vibrato units. This assembly attaches to vibratos using the included set screw.

Genuine Bigsby® Duane Eddy handle assembly. This unit attaches to vibratos using the included set screw.

Genuine Bigsby® replacement flat handle with pre-installed stud. This 9.5" flat handle is longer than the stock handle used on most Kalamazoo Series vibratos.

Genuine Bigsby® flat handle assembly for use with Bigsby vibrato units. The is the stock handle assembly to the Kalamazoo series vibratos. This unit attaches to vibratos using the included set screw.

Original Bigsby flat vintage handle assembly.

Genuine Bigsby® narrow vintage handle assembly for use with Bigsby vibrato units. This unit attaches to vibratos using the included set screw.

Genuine Bigsby® narrow, stationary handle for use with Bigsby vibrato units. This 50s style fixed arm is a single piece and does not swivel.

Genuine Bigsby® replacement handle stud.

Genuine Bigsby® replacement hinge for use with B11 and B12 vibratos. Gold finish. Hinge pin sold separately.

Bigsby long B6-style hinge plate.

Genuine Bigsby® replacement hinge for Gretsch by Bigbsy B3C and B6C vibratos.

Set of 6 Ratio InvisoMatch standard installation plates, designed for easy installation of Ratio Calibrated Machine Heads. These have the modern Fender style two-pin mounting system (slightly larger than the Ratio two-pin mount). Use your guitar's existing mounting holes for a fast, perfect Ratio Installation.

This modern cupstyle Tele® jackplate is milled from brass and has a shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!

Original Fender® jack plate for Stratocaster. Used on nearly every Stratocaster manufactured from 1954 to present. Includes screws.

Original Fender® jack cup for Tele, nickel, includes mounting hardware. For use on nearly all U.S. and Mexico-made Telecaster guitars manufactured from 1952-present

Generic plastic jack plate. Fits Les Paul and other guitars. Mount the guitar's output jack in the ⅜" hole in the center of the jack plate.

Avoid loose output jacks with this jack mount for Telecaster guitars. Includes two angled screws that ensure that the jack will be held tightly in place. Multiple color options available.

• Capable of being screwed directly onto switchcraft jacks

Replacement jack plate for Telecasters

Gotoh’s JCB-2 jackplate is a curved football style plate for guitars and basses with edge mounted jacks. This high quality jack plate comes with two matching screws.

The Gotoh Relic strat® style jack plate is a convincingly aged part that is perfect for a vintage guitar or a relic'd guitar. Parts from the Gotoh Relic series are uniquely worn for an aged look that offers the functionality of a new part. The various techniques used on these parts provide a relic'd look that appears genuine and not overdone. This plate fits 1/4" jacks. Relic'd mounting screws are included.
For matching aged hardware, please check out the rest of the Gotoh Relic series:

• Tremolo Set - P-GGT-82
• 6-in-a-line Tuners - P-GGT-81
• Strap Buttons - P-GGT-86-AC
• Neck Plate - P-GGT-89
• String Trees - P-GGT-92