Luthier Parts & Tools

Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.

Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.

Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.

Gotoh’s Telecaster bridge has the vintage look and mounting layout with a few modern additions: The In-Tune saddles give you the vintage look with unique grooves cast into the saddle to move the contact point of each string for more accurate intonation. Each saddle is reversible and can be used in any position. This gives you a huge advantage over traditional barrel style saddles that were never designed with precision intonation in mind. The brass saddles will give you that bright Tele twang! The stamped steel base plate’s cut down sides give you the unrestricted string access that many modern players prefer.

Grover Strap Locks feature the 'quick release' mechanism players want and need. This strong, yet lightweight accessory provides security along with the ability to easily remove the strap for use on another instrument or storage.

Genuine Fender® vintage-style Strat bridge mounting screws. Some of Fender’s most requested replacement screws. Made for Fender® and used on a variety of vintage and contemporary models.

• Set of 12 replacement screws
• Genuine vintage specifications
• Nickel plating
• Phillips oval-head (#6 x 1 1/8")
• Used on American Vintage Stratocaster® guitars

Sold individually. USA made vintage 90 degree blunt tip pointer washer made from steel. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs.

The new Kluson® Supreme series tuners have an 18:1 gear ratio in the traditional stamped steel housing. Designed for use on headstocks using vintage style press fit bushings. Mounting screws and bushings included.

• 6-in-line orientation
• Metal,oval button
• Safety post
• Precise 18:1 gear ratio

Jaguar style master control plate in chrome. Perfect replacement for most Jaguar style guitars. 4.12” x 1.86” plate mounting center distance (0.14” diameter, recessed).

Genuine Fender®. Package of 12 pieces of rubber tubing for pickup mounting on most Fender instruments with pickguard-mount pickups.

High quality USA made steel anchor bushings available in long or short lengths with a coarse or fine knurl for a variety of stop tailpiece uses. These bushings fit 5/16 – 24 US Threaded studs. Studs sold separately.

Tremolo tension springs. Similar to P-GTSPRN-5 but generic manufacture.

Fender® vintage strap buttons. Designed to fit most Fender instruments. All mounting hardware included.

Double edge nut files featuring popular guitar gauges specially designed for slotting nuts. Each set of files is specifically designed for guitars of a particular type. This set of three files will cover the work of six and cuts a smooth round bottom slot. Always try and use a file gauge that’s not more than a couple thousandths larger than the gauge of string you are using. Smaller files can be used to create wider slots by using a side-to-side movement while cutting.

• 4” cutting edge
• Set of 3 files
• Made In Japan

Set screw. Designed to replicate an "aged" look.

This set of string guides includes the Gotoh RG105 and RG130 for string retention with a staggered height. One guide has a height of 2.5mm and the other has a height of 5mm achieved by using different sized standoffs. These string guides are a vintage style stamped leaflet. Mounting screws are included. String guides are also referred to as string trees or string retainers.

2 pieces per set, screws included.

Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender&reg offers this high quality, 5 position super switch with knob and mounting hardware.

Gotoh vintage style guitar machine heads w/staggered posts, 6-in-line.

• Vintage style slotted post
• 15:1 gear ratio
• 6-in-line orientation
• Mounting hardware included

U.S. made plated brass jack plates for Les Paul and other compatible guitars. These plates feature high quality finishes and fit ⅜” bushing jacks like Switchcraft W-SC-11.

Removes: Sweat, dirt, oil, smoke and spilled beer. Produces: Brilliant Shine. The World's Most Effective Guitar Polish! For best results use a clean Lizard Spit Micro Fiber polish cloth. Refrain from using a dirty cloth - it may scratch the surface.

Bob Smith Industries™ Insta-Cure™ Super Thin Cyanoacrylate. A must have for luthiers! Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds (1-3 sec.). Surfaces to be bonded must be tight fitting (no visible gaps) and should be held together or clamped while you apply the CA around the edges of the seam. For glue applications with small gaps or looser fitting joints the higher viscosity Insta-Cure+™ is recommended.

• Water-thin consistency
• 1-3 second cure time
• For tight fitting applications
• Available in 1oz. and 2oz. sizes

WARNING: These products are eye and respiratory irritants. Product can bond skin instantly. Keep away from children!

A specialized tool for cleanly pulling out frets. The narrow jaws are designed specifically to allow for a clean grip on frets. The special flush ground 1/2" jaws can easily bite the frets without damaging the fretboard.

High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.

• Measures 56 mm x 11 mm x 6.35 mm
• Sold individually