Luthier Parts & Tools
Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lug
Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On
Switch - Carling, Mini Toggle, DPDT, 3 Position, Solder Lugs, Flatted
Genuine Carling DPDT 3-position mini toggle switch with solder lugs. These switches feature a flattened actuator.
- 0.354" bushing length
- ¼" chassis hole diameter
- DPDT ( Double Pole/ Double Throw) switch
- Solder Lugs
Knob - Top Hat, Gold with Gold Cap, Gibson Style
Gold Gibson style top hat knobs with gold caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.
Jackplate - For Les Paul, Plated Brass, USAU.S. made plated brass jack plates for Les Paul and other compatible guitars. These plates feature high quality finishes and fit ⅜” bushing jacks like Switchcraft W-SC-11.
Strap Buttons / Pins - Gotoh, EP-B1, Gibson® StyleHigh quality strap buttons from Gotoh. Available in multiple finishes. This style matches the look of strap buttons used on many Gibson® guitars. Mounting screws are included with each pair of strap buttons.
Cover - Humbucker, 49.2mm, Nickel Silver, USAOriginal, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 49.2mm spacing.
Cover - Humbucker, 50mm, Nickel Silver, USAOriginal, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.
Accessory Kit - Fender®, for StratocasterFender Stratocaster accessory kit. Includes Volume & Tone knobs, tremolo arm tip, switch tip, tremolo back plate, and pickup covers
Bridge - Gotoh, BS-TC1S, Vintage Tele, Cut-Down Sides, In-Tune SaddlesGotoh’s Telecaster bridge has the vintage look and mounting layout with a few modern additions: The In-Tune saddles give you the vintage look with unique grooves cast into the saddle to move the contact point of each string for more accurate intonation. Each saddle is reversible and can be used in any position. This gives you a huge advantage over traditional barrel style saddles that were never designed with precision intonation in mind. The brass saddles will give you that bright Tele twang! The stamped steel base plate’s cut down sides give you the unrestricted string access that many modern players prefer.
Potentiometer - Fender®, 250kΩ, Audio, Knurled Shaft
250K ohm, audio taper. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender ® packaging.
Nut - Bone, Oversized, 56mm x 11mm x 6.35mm
High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.
- Measures 56 mm x 11 mm x 6.35 mm
- Sold individually
Switch Tip - Fender®, StratocasterOriginal Fender set of two pickup switch tips for use on most U.S. and Mexico-made Stratocaster® models.
Bobbin - Humbucker, P.A.F., 49.2mm, Screw Side, Butyrate, USAOriginal, made in USA, P.A.F.-correct bobbins for making humbucker pickups. These screw side bobbins are made of butyrate molded in casts of the originals and feature a 49.2mm spacing.
Jack Plate - Fits Les Paul, PlasticGeneric plastic jack plate. Fits Les Paul and other guitars. Mount the guitar's output jack in the ⅜" hole in the center of the jack plate.
Neck Plate - Strat Style, Standard, Chrome
Strat style 4 bolt neck plate. (Mounting hardware not included). Four ¼” mounting holes. Made in Korea
Bobbin - Humbucker, P.A.F., 49.2mm, Slug Side, Butyrate, USAOriginal, made in USA, P.A.F.-correct bobbins for making humbucker pickups. These screw side bobbins are made of butyrate molded in casts of the originals and feature a 49.2mm spacing.
Tremolo Stopper - Brass Block, Hex Screw, Allen Key
Brass tremolo stopper. Used as a floating bridge stop for Fender and Floyd Rose style tremolo systems. Prevents inadvertent vibrato effects produced by resting the picking hand over the bridge while playing. Allows for down-bends and prevents up-bends for a stabilized return of the whammy bar. Allen screw can be easily reversed to allow for a floating bridge setup again. Includes: (1) brass block (1.05" L x .39" W x .49" H) (1) allen key, 2 mm (1) allen screw (M4 x .70 thread, 20 mm length) (1) hex nut (M4 x .70 thread) (2) countersunk mounting screws (10 mm length)
Bridge - Gotoh, GE1996T, Floyd Rose® licensedThe Gotoh GE1996T is a high end locking tremolo licensed by Floyd Rose. This version of the locking tremolo is a premium option that is great for new installs or upgrading original units. The hardened steel saddles and patented stud lock technology ensure a rock solid performance. Springs, spring claw, and all mounting hardware are included along with two hex wrenches for dialing in adjustments. 40mm block.
Pickup Kit - Telecaster, Bridge or Neck
Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. These pickups use alnico 5 pole pieces to produce a warm, well rounded classic tone.
Potentiometer - Bourns, Audio, Solid Shaft, Dual Mini, Push-Pull
Mini Carbon Element, Push Pull Switch, Dual Audio, Solid Shaft. 17 mm body diameter. 1/4" watt, 300° rotation. DPDT, 6mm shaft diameter. Solder lugs. 3/8" bushing. Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch. Used for Split-Coil Pickup Switching Electric guitar manufacturing is a multi-billion dollar industry with major manufacturers established worldwide. From the introduction of the first mass-produced electric guitar in 1950, guitarists have been mesmerized with advances in technology and the wide array of after- market parts commercially available for guitar upgrades. Specialty products such as Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch allow the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking (double-pole) pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
Potentiometer - Bourns, Dual MN Taper, Solid Shaft, 500kΩ
Dual MN taper blend-balance with center detent. Solid shaft. 17 mm body diameter. ¼ watt, 300° rotation. 6mm shaft diameter. Solder lugs. 3/8" bushing.
Washer - Fender®, Lock Type, for Potentiometers
Lock washer for Fender® potentiometers. Package of 12.
Tremolo Springs - Fender®, American Series
This spring helps set your tremolo arm in a fixed position when used with any Fender® American series or American Standard series tremolo. Simply insert spring into tremolo arm receptacle prior to installing tremolo arm. Package includes twelve tension springs. Used in Custom Shop, American Series, American Vintage, American Standard (USA), and Classic, Deluxe, and Road Worn® Series (Mexico) instruments.
Tuners - Grover, Rotomatic, 3 per side, 18:1 ratioThe original Rotomatic® with an improved higher ratio gearing. The 18:1 ratio provides for finer tuning and greater stability. The finer gears provide smoother tuning and a higher degree of backlash elimination. This new version of the Rotomatic® uses the exact housing as the original. Only the gearing has changed. Includes washers, bushing and wood screws.