Luthier Parts & Tools

Knob pointer - 90 degree blunt tip, USA
Colors Available:
Sold individually. USA made vintage 90 degree blunt tip pointer washer made from steel. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs.
Please Log In to view prices
Lubrication - Dr. Duck's, Ax Wax & String Lube, Organic
For use on the entire fretboard, headstock, front,sides, back and pickguards. Also cleans and lubes bridge saddles, fine tuners on locking tremolo systems, tuning machine knobs and posts. US made with US materials, 4 oz.
Please Log In to view prices
Switch - Carling, Mini Toggle, DPDT, 3 Position, Lugs, Short Bat
Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 3-Position
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
  • Solder lugs
Please Log In to view prices
Bridge - Gotoh, GE1996T, Floyd Rose® licensed
Colors Available:
The Gotoh GE1996T is a high end locking tremolo licensed by Floyd Rose. This version of the locking tremolo is a premium option that is great for new installs or upgrading original units. The hardened steel saddles and patented stud lock technology ensure a rock solid performance. Springs, spring claw, and all mounting hardware are included along with two hex wrenches for dialing in adjustments. 40mm block.
Please Log In to view prices
Bridge - Gotoh, GE103B-T, Tune-O-Matic, Studs / Bushings Post
Colors Available:
A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Threaded thumbwheel style studs and bushings and features hard zinc saddles. Hardware included.
Please Log In to view prices
Wire - Bus, 100 foot Spool, tinned copper
Solid tinned copper bus wire. 105°C temperature rating, 600V.
Please Log In to view prices
¼" Jack - Switchcraft, Acoustic End Pin, Mono / Stereo, Nickel
High quality acoustic end pin style jacks from Switchcraft. These nickel plated jacks have three conductors, a strain relief clamp, and a threaded shroud for a professional looking wiring job. The special strap nut can be removed to reveal a hex nut that can be used for external tightening of the jack.
Please Log In to view prices
Circuit - PMT, Variable Treble Bleed
The V-Treb Variable Treble Bleed Circuit attaches to the bottom of any volume pot and corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced. Turning the trim pot clockwise increases the amount of treble bypass for a brighter sound at reduced volumes. Turning the trim pot counter clockwise reduces the amount of treble bypass for a warmer tone at reduced volumes. With the volume at 10, the V-Treb is removed from the circuit and does not affect the sound.
Please Log In to view prices
Neck Plate - Strat Style, Standard, Chrome
Strat style 4 bolt neck plate. (Mounting hardware not included). Four ¼” mounting holes. Made in Korea
Please Log In to view prices
Knob - Top Hat, Gold with Silver Cap, Gibson Style
Gold Gibson style top hat knobs with silver caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.
Please Log In to view prices
¼" Jack - Switchcraft, Mono, isolated break circuit
Switchcraft Type 13E phono jack. Mono 2-conductor isolated break circuit. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Includes nut and washer.
Please Log In to view prices
Screw - phillips, for pickguards / control plates
Colors Available:
Pick guard screws, phillips, ovalhead. Great for mounting countersunk pickguards, control plates, etc.
  • 7/16” threaded portion
  • Available in Black, Gold, Nickel, and Chrome plating
  • Package of 100
package of 100
Please Log In to view prices
Potentiometer - Fender, dual Audio, concentric solid shaft
Original Fender, Audio potentiometer, concentric, 250kΩ / 500kΩ, solid shaft.
  • Mounting hardware not included
  • Used for stacked volume controls on American Vintage '62 Jazz Bass® and Acoustasonic Telecaster®, and Nashville Power Telecaster® guitars
  • Will not work with push-on style control knobs; set screw mounting knobs only
Please Log In to view prices
Switch - Carling, Mini Toggle, 3PDT
Carling mini-toggle switch, 3PDT, ideal for stomp boxes, phase switching, coil-tapping, series/parallel pickup switching in guitars.
  • 0.354" bushing length
  • 1/4" mounting hole diameter
  • On-On Three pole/double throw (3PDT)
Please Log In to view prices
Nut - Bone, Oversized, 56mm x 11mm x 6.35mm
High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.
  • Measures 56 mm x 11 mm x 6.35 mm
  • Sold individually
Please Log In to view prices
Pickguard Blanks - 12” x 17.5” sheet, 0.095” thickness
Color, Plys Available:
Blank pickguard material sheets for cutting custom pickguards, truss rod covers, and back plates. These sheets come in a variety of colors as well as single ply and three ply options. All colors feature a gloss surface.
Please Log In to view prices
Switch Accessory - Mini Toggle Caps
Colors Available:
Rubber caps / switch tips for mini toggle switches in a variety of colors. These are made for standard sized toggle bats.
Please Log In to view prices
Switch - Pickup Selector, Telecaster, 3-Way
Tele style 3 position pickup selector switch. M3.5 x 0.80 mounting hole threading. Switch tip not included.
Please Log In to view prices
Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Flatted
Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars. This switch features a flattened actuator.
  • 0.354" bushing length
  • 2 Position On-On
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
Please Log In to view prices
Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lug
Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On
Please Log In to view prices
¼" Jack - Switchcraft, Mono, transfer circuit
1/4" Mono 2 Conductor Jack, Transfer Circuit. Used in Fender, part number: 004-1701-000. Includes nut and washer.
Please Log In to view prices
Wood Screw - #2 x 1/2”, Phillips, Round Head, Brass
Original, made in USA, #2 x ½” wood screws. These premium screws are made of raw brass and are perfect for mounting bobbins to baseplates. These are reproductions of the PAF style mounting screws.
Please Log In to view prices
Switch Tip - Fender®, Stratocaster
Colors Available:
Original Fender set of two pickup switch tips for use on most U.S. and Mexico-made Stratocaster® models.
package of 2
Please Log In to view prices
Tremolo Arm - Wilkinson by Gotoh, A7
Colors Available:
Genuine replacement arm for the Wilkinson/Gotoh VS-100N Tremolo. Internally threaded, sturdy knobless .216"-diameter (5.5mm) stainless steel; extends approximately 5-⅝" (142.88mm). Sturdy VS-100N tremolo arm. Multiple color options available.
Please Log In to view prices