Luthier Parts & Tools
Screw - phillips, for pickguards / control platesPick guard screws, phillips, ovalhead. Great for mounting countersunk pickguards, control plates, etc.
Package of 100
- 7/16” threaded portion
- Available in Black, Gold, Nickel, and Chrome plating
- Package of 100
Knob - Top Hat, Gold with Silver Cap, Gibson Style
Gibson style top hat knob. Fits fine knurled pot shafts.
Control Plate - Telecaster Style, for ⅜” Bushing PotsTele style control plate. 5.9” plate mounting center distance (0.123” diameter, recessed).
- Two potentiometer mounting holes for 3/8” bushing diameters
- One standard selector switch mounting slot (1.63” mounting center distance, 0.15” diameter, recessed)
- Made in Korea
Wood Screw - #2 x 1/2”, Phillips, Round Head, Brass
Original, made in USA, #2 x ½” wood screws. These premium screws are made of raw brass and are perfect for mounting bobbins to baseplates. These are reproductions of the PAF style mounting screws.
Potentiometer - Fender, dual Audio, concentric solid shaft
Original Fender, Audio potentiometer, concentric, 250kΩ / 500kΩ, solid shaft.
- Mounting hardware not included
- Used for stacked volume controls on American Vintage '62 Jazz Bass® and Acoustasonic Telecaster®, and Nashville Power Telecaster® guitars
- Will not work with push-on style control knobs; set screw mounting knobs only
¼" Jack - Pure Tone, Stereo, Double Open CircuitPure Tone has developed a high quality 1/4" three pole (stereo) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs for both the tip connection, a spring for the ring, and an additional spring for the shield connection. These help to secure the plug into place and create a greater surface area connection at contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.
Switch - Carling, Mini Toggle, DPDT, 3 Position, Lugs, Short Bat
Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.
- 0.354" bushing length
- ¼" mounting hole diameter
- Double pole/Double throw (DPDT)
- Solder lugs
Switch - Carling, Mini Toggle, 3PDT
Carling mini-toggle switch, 3PDT, ideal for stomp boxes, phase switching, coil-tapping, series/parallel pickup switching in guitars.
- 0.354" bushing length
- 1/4" mounting hole diameter
- On-On Three pole/double throw (3PDT)
Switch Tip - Fender®, StratocasterOriginal Fender switch tips. Pack of 2.
Package of 2
Knob - Top Hat, Black with Gold Cap, Gibson Style, Push-On
Gibson style top hat knob. 24 spline (for knurled split shaft pots).
Strap Buttons / Pins - Fender®, vintage
Package of 2Fender® vintage strap buttons. Designed to fit most Fender instruments. All mounting hardware included.
¼" Jack - Switchcraft, Acoustic End Pin, Mono / Stereo, Nickel
High quality acoustic end pin style jacks from Switchcraft. These nickel plated jacks have three conductors, a strain relief clamp, and a threaded shroud for a professional looking wiring job. The special strap nut can be removed to reveal a hex nut that can be used for external tightening of the jack.
Jack Plate - Fits Les Paul, PlasticGeneric plastic jack plate. Fits Les Paul and other guitars. Mount the guitar's output jack in the ⅜" hole in the center of the jack plate.
Circuit - PMT, Variable Treble Bleed
The V-Treb Variable Treble Bleed Circuit attaches to the bottom of any volume pot and corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced. Turning the trim pot clockwise increases the amount of treble bypass for a brighter sound at reduced volumes. Turning the trim pot counter clockwise reduces the amount of treble bypass for a warmer tone at reduced volumes. With the volume at 10, the V-Treb is removed from the circuit and does not affect the sound.
Fret Puller - Narrow Jaws, for removing frets
A specialized tool for cleanly pulling out frets. The narrow jaws are designed specifically to allow for a clean grip on frets. The special flush ground 1/2" jaws can easily bite the frets without damaging the fretboard.
Switch - Switchcraft, Slide, DPTT, 3-Position
Genuine Switchcraft® DPTT 3-position slide switch for use on Mustang and Duosonic style guitars. This switch can be wired to operate in either On/Off/On or On/On/On configurations. Upgrade cheap or malfunctioning switches with these high quality replacements.
- Recommended .75 control cavity depth
- 1.406” center-to-center mounting hole spacing
- #4-40 screws recommended for mounting
- Screws not included
Bushings - Kluson, ¼" bushings, for retrofittingAdapter bushings to retrofit US 1/4 inch post Kluson tuners in a headstock drilled for modern die cast tuners. Nickel plating. Set of 6. These Kluson® steel replacement - adapter bushings are intended for use in converting a modern 10mm drilled headstock to accept a vintage Kluson stamped steel tuning machines with the original US 1/4 inch string post diameter. Many repair shops use these to convert a vintage instrument back to original peg head specs
Package of 6
Knob - Gotoh, Relic, Dome, aged chrome
Set screw. Designed to replicate an "aged" look.
Tailpiece - Gotoh, Height AdjustableThis zinc diecast height adjustable stop tailpiece from GOTOH features threaded adjustable studs and knurled bushings. Hardware included. Anchor bushings: M8x1.25, 25mm height.
Nut - Bone, Oversized, 56mm x 11mm x 6.35mm
High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.
- Measures 56 mm x 11 mm x 6.35 mm
- Sold individually
Tuners - Gotoh, Large Schaller-style Knob, 3 per sideThese super tuners are recognized as such around the world. The SG381 feature a 16:1 gear ratio and has evolved through improvement without compromise at any stage and come equipped with a considerable application of high-technology as standard. With the improvement of precision fitting gears, marvelous touch on playing---they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. These come with a metal schaller style button and are perfect for your three-on-a-side setup. Mounting hardware included.
Package of 6
Neck Plate - Strat Style, Standard, Chrome
Strat style 4 bolt neck plate. (Mounting hardware not included). Four ¼” mounting holes. Made in Korea
Jack Plate - Gotoh, Football shape, CurvedGotoh’s JCB-2 jackplate is a curved football style plate for guitars and basses with edge mounted jacks. This high quality jack plate comes with two matching screws.
Tuner Knob - Kluson, Pearloid Keystone, for tuners
Single ring. Replacement color-correct Keystone (tulip) press-on button for Kluson® tuning machines. Correct for vintage applications. Sold individually. See P-GKLU-SLNDR for double ring.