Luthier Parts & Tools

High quality SD90 tuners from Gotoh with brass posts and internal washers. Brass posts were used by Gibson® until 1975 and by Fender® until 1966. Unlike the common steel components, brass string posts and internal washers improve vibration transmission, resulting in a sound that is similar to the original vintage tuning machines. This 3-per-side keystone button tuner set includes all bushings and mounting screws.

These super tuners are recognized as such around the world. The SG381 feature a 16:1 gear ratio and has evolved through improvement without compromise at any stage and come equipped with a considerable application of high-technology as standard. With the improvement of precision fitting gears, marvelous touch on playing---they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. These come with a metal keystone head and are perfect for your three-on-a-side setup. Mounting hardware included.

Gotoh chrome locking tuner. Great upgrade or replacement for many stock tuners.

• #5 button
• Chrome finish
• 16:1 gear ratio
• 3+3 orientation

Gotoh's unique grooving on the “In-Tune” saddles results in more exact intonation compared to traditional vintage-style saddles. Each saddle is reversible and can be used in any position. Titanium construction is used for rich harmonic overtones and long sustain. The brass saddles create a bright sound. 10.8mm string spacing

The Gotoh TLB-2 is a high quality set of bass string ferrules. These press fit ferrules are a great choice for Fender® basses or any bass with a string through bridge. Includes four ferrules.

Genuine Gotoh replacement tremolo arm for GE101TS

• Chrome with black tip
• #10-32 thread

Steel saddles for electric guitar tremolo bridges and hardtail bridges. 2-3/32'' string spread. Set of 6 replacement steel guitar saddles.

This aluminum height adjustable stop tailpiece from GOTOH features threaded adjustable studs and knurled bushings. Aged nickel finish. Hardware included. Anchor bushings: M8x1.25, 25mm height.

Direct replacement for most Fender P-Bass and Jazz Bass guitars. Superior high quality and precision made. This is for those who demand only the best for their Bass without breaking the bank. Mounting screws included.

This control plate features an artistic acanthus flower engraving that adds a custom look to Telecaster guitars. The Gotoh Luxury-Mode series includes stylized parts made with an ultra fine, high-speed carving technology. These parts are replacements that can enhance the appearance of any guitar. Two mounting screws are included with the control plate. The 9.6mm mounting holes for the potentiometers are compatible with ⅜” bushing pots such as CTS.

A modern version of the Tune-o-matic style bridge for guitars. Pre-notched titanium saddles with an individual saddle intonation screw retained by mini hex nuts for each saddle. Threaded thumbwheel style studs and anchor bushings. Hardware included.

Machine heads without a sealed gear are criticized for not having the same smooth performance, efficiency and durability that sealed gear tuners have. The SD series solves these problems by combining "Rock-solid" technology and the post collar or: "Self-Center Guide", found on enclosed gears in the base plate of the gear allowing the post to perfectly align itself with the bushing which attaches the gear to the headstock. The SD series uses a torque balancer to ensure steady rotation of the tuner button giving high quality sound performance as well as great functionality. Through its use of the ideal materials selected for each component part you also obtain a far superior sound. Mounting hardware included.

These compact bass machine heads with threaded bushings for 9/16'' diameter peg holes. Gotoh's "Res-O-Lite" machine heads are extremely light weight, only 40 grams each, and made from aluminum alloy to make for a less heavy necked bass. Superior quality and precision made for even the most demanding players out there! Comes in 2+2 configuration and features a 20:1 Gear Ratio. Mounting hardware included.

The Gotoh Relic GE104B bridge is a convincingly aged part that is perfect for a vintage or relic'd guitar. Parts from the Gotoh Relic series are uniquely worn for an aged look that offers the functionality of a new part. The various techniques used on these parts provide a relic'd look that appears genuine and not overdone. This bridge features zinc saddles, a 52mm string spacing, a 400mm radius, and 74mm stud spacing. M4 threaded mounting posts and thumb screws are included.

The Gotoh GTC101 is a fixed bridge for hard tail guitars such as Strat® style guitars with through-body string mounting. The bridge includes plated brass saddles for a warmer tone and features a 52.5mm string spacing. Saddle intonation and height can be individually adjusted with the included hex wrench. Mounting screws included.

Precision 20:1 gear ratio enclosed Bass Guitar tuners. With a 7/16"-diameter string posts and threaded hex bushings. They require a 9/16"-diameter peghole for installation. Featuring sealed lubricated, cast housings and metal knobs. Mounting screws are included. Mounting hardware included. For 5-string bass. 3 Left, 2 Right.

Gotoh 510TS Series Tremolos are machined with Chrome Molybdeumn Steel knife edges to withstand years of abuse and trouble free use. Comes stock with a vintage steel block with more mass and better tone. These are top of the line Gotoh tremolo units. Tremolo-unit includes the following accessories: Arm, Spring, Spring-holder, Wrench, Stud-bolt, Screw etc… Hardware included.

These compact bass machine heads with threaded bushings for 9/16'' diameter peg holes. Gotoh's "Res-O-Lite" machine heads are extremely light weight, only 40 grams each, and made from aluminum alloy to make for a less heavy necked bass. Superior quality and precision made for even the most demanding players out there! Come in 4 on a side and features a 20:1 Gear Ratio. Mounting hardware included.

Gotoh’s FB30 tuners are an excellent set for any bass guitar. This tuning machine set offers Gotoh’s high quality build standards in a vintage style bass tuner. These tuners feature clover tuning keys, a 20:1 gear ratio, Gotoh’s inner friction free ring, and a classic styled footprint. Mounting screws and press fit bushings are included with this set.

This bridge features an artistic acanthus flower engraving that adds a custom look to Telecaster guitars. Designed for use with a Telecaster® single coil pickup, this bridge includes six adjustable chrome-plated brass saddles, and features a string-through design. The Gotoh Luxury-Mode series includes stylized parts made with an ultra fine, high-speed carving technology. These parts are replacements that can enhance the appearance of any guitar. Four mounting screws and a hex key for the saddle adjustments are included with this bridge plate.

Non-direct replacement tuners for vintage and vintage reissue Fender® basses. Similar in style to the original Fender tuners but the footprints are different. New holes will be needed to install if retrofitting to a Fender® instrument. Complete with bushings and mounting screws. Mounting hardware included. Reverse wind. ​

Precision 20:1 gear ratio enclosed Bass Guitar tuners. With a 7/16"-diameter string posts and threaded hex bushings. They require a 9/16"-diameter peghole for installation. Featuring sealed lubricated, cast housings and metal knobs. Mounting screws are included. Mounting hardware included. For 5-string bass. 2 Left, 3 Right.

Direct Drop-in compact bass machine heads with threaded bushings for 9/16'' diameter peg holes. Gotoh's Res-O-Lite machine heads are extremely light weight (59.2 grams each) from aluminum alloy to make for a less neck heavy bass. Features a 26:1 Gear Ratio. 2+2 config, fits many Standard American and Mexican basses. Also the key post can be removed and replaced on opposing side.Comes in 2+2 configuration. Mounting hardware included.

Gotoh’s 35G1800 classical tuners feature a solid brass construction with an engraved vine design. These parts are born from Gotoh’s latest, state of the art manufacturing processes. In order to breathe life into these parts and build the finest machine heads in the world, they are exquisitely finished by skilled artisans, with absolutely no compromise. The work of craftsmen on each individual part has gained the classic machine heads of this series, critical acclaim and trustworthiness in the eyes of musicians all over the world. These feature a 14:1 gear ratio for great tuning stability. Mounted 3-per-plate, 2 plates. Mounting hardware included.