Luthier Parts & Tools

Tone control for Eric Clapton mod kit. Original Fender, 50K Audio, Split Shaft, 1/4" Bushing

The Fender® S-1™ switched pot is a stealthy way to mod a strat without drilling any extra holes. The switch can be configured for almost any configuration with its four double-throw poles. S-1™ pots use a 3/8” bushing.

Genuine Fender® chrome bridge cover plate for vintage style Telecaster bridges. This cover is made of stamped steel and finished with chrome just like the originals from the 1950s were made. These will fit most standard spec, three saddle, ashtray type bridges.
Features:

• Genuine Fender plated-steel bridge cover
• Introduced on 1950 Esquire® guitar
• Fits most left- or right-handed Telecaster guitars equipped with a vintage-style three-saddle bridge

Sold individually. See P-K368X for knob caps

Genuine Fender replacement knob cap for S-1 switch, which can be retrofitted to nearly any U.S.- and Mexico-made Stratocaster manufactured from 1954-present.
Direct Replacement for P-K358X

Original Fender® Tele "Top Hat" tip in black.

Fits most American Telecasters. This modern pickguard fits American, American Standard, American Deluxe, American Special, Highway One™, Road Worn®, Deluxe Player, Blacktop, Standard and Deluxe series Telecaster guitars (also fits Squier® Standard series Telecaster models 2004-present).

Genuine Fender chrome hard-tail bridge assembly for use on Classic and Pawn Shop series instruments. Includes six stamped saddles, intonation screws and springs, and saddle-height adjustment screws.

• String-through-body design
• Mounting hardware not included
• 2-7/32" String Spacing

Chrome-plated steel bridge plate for use on American Vintage, Classic and Road Worn® series Telecaster® models.

• String-through-body three-saddle design
• Mounting hardware and bridge saddles not included

Original Fender® string guide, American Series, chrome, package of two.
String guides are also known as string trees or string retainers.

250K ohm, solid shaft, no load. Some Fender guitars have a unique tone circuit that features a "Delta Tone" Control. The "Delta Tone" system consists of a high output bridge pickup and special 'no-load' tone control for the middle and bridge pickups. This new pot has a detent at the 10 position which bypasses completely any filtration through capacitors. Unlike the TBX, which has a detent at the 5 position and gradually reduces the amount of filtration through the capacitor, the Delta-Tone's 'no-load' feature eliminates filtration completely at the detent and the result is more of the direct presence of the pickup.

Original Fender® pickup cover for vintage P-Bass, chrome.
Features:

• True vintage specifications
• Fits American Vintage, Road Worn and Classic Series basses
• Will not fit five-string basses
• Mounting hardware not included

Original Fender® replacement pickup cover for Strat, package of 3.

Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including our American Vintage series of guitars and basses.

Original Fender® bridge cover for vintage P-Bass. Keep your P Bass as vintage-accurate as possible with this period-correct bridge cover for vintage Fender® bridge assemblies. This bridge cover is sure to impart traditional Fender looks and evoke the early tones of Fender with complete precision.
Features:

• Genuine vintage specifications
• Fits American Vintage, Road Worn and Classic Series basses
• Will not fit five-string basses
• Mounting hardware not included

Genuine Fender® pre-slotted melamine nut for Telecaster and Stratocaster guitars. This nut has 9 1/2 in. top radius and 7 1/4" bottom radius with an overall length of 1.695 in.

Original Fender® pickup cover for vintage J-bass, chrome. Give your Jazz Bass some old-school attitude with this vintage-style chrome pickup cover. Channel Fender's early days with complete accuracy while keeping those pickups looking and sounding factory-fresh.
Features:

• True vintage specifications
• Fits American Vintage, Road Worn and Classic Series basses
• Mounting hardware not included

Go ahead and jump! You're protected by Fender® strap locks

Set of five Stratocaster® tremolo tension springs for use on American Vintage series and Custom Shop instruments.

• Set of five nickel-plated steel tremolo tension springs
• For American Vintage series and Custom Shop instruments

Set of three compensated brass bridge saddles for use on vintage-style three-saddle Telecaster bridges (does not fit standard six-saddle Telecaster bridges).
Set includes saddles, intonation springs, slotted intonation screws and saddle-height adjustment screws.
Features:

• Set of three compensated brass bridge saddles
• For vintage-style three-saddle Telecaster bridge assemblies

Genuine Fender® set of six nickel-plated chrome bridge saddles for use on American Vintage series Stratocaster models manufactured from 1986-present. Centered intonation screws, intonation springs and saddle-height adjustment screws included. Features:

• Set of six nickel-plated chrome bridge saddles
• Centered intonation screws, intonation springs and saddle-height adjustment screws included
• For American Vintage Stratocaster models (1986-2012)

500K ohm (audio taper), solid shaft. Made in Taiwan.

High-quality solid-brass string nut as used on the Yngwie Malmsteen Stratocaster®, for use with Stratocaster and Telecaster® guitars.
Designed for 9.5"-radius fingerboards and pre-slotted with string location grooves to simplify spacing and positioning during final slot filing.
Features:

• High-quality solid-brass string nut
• For 9.5" fingerboard radius
• Pre-slotted
• 9.5" (241mm) top and bottom radius
• 1.620” (41.15mm) wide

4 x 1.25, package of 12. For a variety of vintage and contemporary Precision and Jazz Bass models