Luthier Parts & Tools

Aged nickel for guitar. String guides are also known as string trees or string retainers. For matching aged hardware, please check out the rest of the Gotoh Relic series:

• Dome Knobs - P-GGT-90
• Tele Bridge - P-GGT-85
• String Ferrules - P-GGT-87
• 6-in-a-line Tuners - P-GGT-81
• Strap Buttons - P-GGT-86-AC
• Neck Plate - P-GGT-89
• Control Plate - P-GGT-91

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 2 magnet, bobbins, poll screws, slug screws, baseplate, and coil lead wires. These humbuckers feature two rows of adjustable polepiece, in bridge and neck position spacings. The neck pickup is warm and buttery, with a clear, present top end. The bridge pickup is fat and honky, with a rich low end and great clarity. Great choice for rock, rockabilly, blues, country and more!

• Resistance(Kohm) : 4.8K
• Magnet : Alnico 2 Bar

This kit builds one pickup.

Original Fender® neck plate stamped with "Fender® Corona California" and including hole for Micro-Tilt™ neck-tilt adjustment. Fits most Fender guitars using four-screw neck mounting with Micro-Tilt. Mounting hardware included.
Features:

• 4-bolt mount
• Stamped "Fender® Corona, California"
• Mounting screws included
• For most Fender guitars using four-screw neck mounting with Micro-Tilt adjustment

Original Fender® vintage-style neck plate for use on most U.S. and Mexico-made Fender guitars and basses using four-screw neck mounting without Micro-Tilt™ adjustment. Mounting screws included.

Replacement pickguard for Fender® 1957 Strat® models. These single ply pickguards have eight mounting holes. Cut from a thicker single ply sheet, these pickguards offer a vintage style with added rigidity. Fits most American, Japanese, and Mexican '57 Stratocasters®.

The Gotoh "Relic" series is purposefully designed to give an "aged" or "vintage" look to your guitar. 2 pieces per set, screws included.

Single ring. Replacement color-correct Keystone (tulip) press-on button for Kluson® tuning machines. Correct for vintage applications. Sold individually. See P-GKLU-SLNDR for double ring.

Original Fender pre-slotted bone nut for Teles and Strats.

Genuine Fender® neck mounting screws. These neck mounting screws are chrome plated and are the standard screws included on most Fender® screws, Includes a full set of four Phillips screws.

Fender® Stratocaster string guides (2 pack)
String guides are also known as string trees or string retainers.

Genuine Fender® 250K pan pot with center detent. Pan pots are also known as balance pots. Solid shaft (1/4") with 3/8” bushing. Mounting hardware not included. See R-VNUT-38 for a compatible nut and washer.

Edge cut nut files in popular gauges specially designed for slotting nuts. These files cut a smooth, round bottom slot. Also great for slotting tune-o-matic bridge saddles! Always try and use a file gauge that’s not more than a couple thousandths larger than the gauge of string you are using. Smaller files can be used to create wider slots by using a side-to-side movement while cutting.

• 4-1/2” cutting edge
• Double sided (both sides are the same gauge)
• Set of 10 files
• Made In Japan

Set contains one of each size:

• 0.010"
• 0.013"
• 0.016"
• 0.024"
• 0.028"
• 0.032"
• 0.036"
• 0.042"
• 0.046"
• 0.056"

Fret Cutters. Use to trim the ends of new fret wire close to the fingerboard without leaving marks. Made in Japan. Dimensions:

• 190 mm total length
• 27 mm jaw width

This set of string guides includes the Gotoh RG15 and RG30 for string retention with a staggered height. One guide has a height of 2.5mm and the other has a height of 5mm achieved by using different sized standoffs. These string guides are a modern style machined metal with improved tuning stability. Mounting screws are included. String guides are also referred to as string trees or string retainers.

Original, made in USA, covers for open-style tele neck pickups. These premium tele covers are made of nickel silver.

Tone control for Eric Clapton mod kit. Original Fender, 50K Audio, Split Shaft, 1/4" Bushing

The Fender® S-1™ switched pot is a stealthy way to mod a strat without drilling any extra holes. The switch can be configured for almost any configuration with its four double-throw poles. S-1™ pots use a 3/8” bushing.

This precise set of 20 feeler gauges in the luthier's workshop can perform a wide variety of functions to measuring with string action to measuring the correct nut slot depths, fret slot width, string to fret clearances, and other hardware installation work, these ground steel feeler gauges are marked in both metric and imperial measurements for easy use.

Switchcraft 3 Position Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® P-SW01. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. Features a slightly longer (3/8”) bushing ideal for thicker topped guitars.

• Tip not included. See W-SC-W0X
• Black finish

Three-ply Telecaster® style pickguards with 8 mounting holes. This pickguard has no pickup mounting holes for use with neck pickups that mount directly to the guitar’s body. All mounting holes are countersunk.

The SG510 series are recognized the world over as one of the top performing super tuners on the market. These feature an 18:1 gear ratio. They have evolved through improvement without any compromises along the way. The come equipped with a considerable amount of high-technology as a standard. With the improvement of precision fitting gears which give a marvelous touch on playing they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. These are three-on-a-side. Mounting hardware included.

USA made vintage 90 degree blunt tip pointer washer made from steel. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs.

Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.

Genuine Fender® chrome bridge cover plate for vintage style Telecaster bridges. This cover is made of stamped steel and finished with chrome just like the originals from the 1950s were made. These will fit most standard spec, three saddle, ashtray type bridges.
Features:

• Genuine Fender plated-steel bridge cover
• Introduced on 1950 Esquire® guitar
• Fits most left- or right-handed Telecaster guitars equipped with a vintage-style three-saddle bridge