Luthier Parts & Tools

Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 9.5” radius. A 9.5” fingerboard has been the standard Fender® neck radius since the 1980s. The bone used for the pre-shaped and pre-slotted nuts is dyed black using a process that results in a fully black nut.

• Height - 5.4 mm
• Width - 42.86 mm
• Thickness - 3.3 mm
• Radius - 9.5 in.

For a version of this nut with a 7.25” radius, see P-GTNN20.

Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.

• Length = 1 41/64 inches (41.52mm)
• Height #1 (fretboard side) = 13/64 inches (5.06mm)
• Height #2 (headstock side) = 13/64 inches (5mm)
• Thickness at bottom = 9/64 inches (3.46mm)
• Thickness at top = 1/8 inches (3.1mm)

The PQ-M644-00 is the perfect option to replace and upgrade the nut on your Martin style acoustic guitar. It has an angled bottom and comes pre-slotted to make for a quick and easy install. Dimensions:

• Length - 1.745 in. (44.32mm)
• Width - 0.224 in. (5.69mm)
• Height - 0.361 in. (9.17mm)
• E to E - 1.418 in. (36.02mm)

High-quality Micarta (synthetic bone) pre-slotted string nut for use on American Standard Precision Bass and other U.S.- and Mexico-made basses with 9.5"-radius fingerboards.

Gotoh locking nuts are superior quality locking nuts that directly replace original Floyd Rose and Floyd Rose style locking nuts. Top mount. Width: 41mm (1 5/8") Radius: 360mm Included: Retainer bar, screws, wrench. Locking nut for Floyd Rose tremolo units.

This brass nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size.

• Thickness = 9/64 inches (3.47mm)
• Flat Bottom Length = 1 11/16 inches (43 mm)
• Height at ends = 13/64 inches (5.25mm)
• Height at middle = 15/64 inches (6mm)

The Graph Tech PQL-5072-00 is a perfect option for Fender guitars or re-issues from the 1950's-60's or 70's. This nut features a 7.25" radius, works with a curved or flat bottom and is permanently lubricated for great tuning stability. It works in both a flat bottom or curved bottom nut slot due to its ingenious design, just sand off the tab for a curved bottom. It is pre-slotted to make for a quick and easy install on just about all Fender electric guitars made in the 1950’s, 60’ and 70’s. The 7.25” fingerboard radius originated in the early 1950s and was used for most Fender electric instruments until the 1980s. In the 80's it was changed to a slightly flatter 9.5" radius. TUSQ XL is designed to boost guitar tone and performance. This precision engineered nut is made with a specially formulated material which couples the strings' vibrations to the neck and brings out the hidden harmonics and richness in every note.

The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Durability Slots wear down over time. Minimal wear.

The PQ-6060-00 is the perfect option to replace and upgrade the nut on your Epiphone guitar. It is also a great option for many other common acoustic and electric guitars. It comes pre-slotted to make for a quick and easy install. Dimensions:

• Length - 1.730 in. (43.94mm)
• Width - 0.239 in. (6.08mm)
• Height - 0.357 in. (9.08mm)
• E to E - 1.344 in. (34.14mm)
• Radius - 15 in.

For a Tusq XL version of this nut, see P-GNUT-TUSQ-EPS-5XL.

The PQ-4187-00 is a 3/16" thick block or slab of pure TUSQ. It can be used to make a nut, small saddle or just about anything you can imagine.
Dimensions:

• Length - 2.5 in. (63.5mm)
• Width - 0.187 in. (4.75mm)
• Height - 0.437 in. (11.1mm)
  

The PQ-1720-00 is the perfect option to upgrade the nut on your six string guitar. It is pre-slotted for a quick and simple install. It is a very common nut used in the Godin family of guitars.
Dimensions:

• Length - 1.695 in. (43.05mm)
• Width - 0.204 in. (5.18mm)
• Height - 0.403 in. (10.24mm)
• E to E - 1.415 in. (35.93mm)

The PQ-4025-00 is a 1/4" thick block or slab of pure TUSQ. It is 1/4" thick and can be used to make a nut, small saddle or just about anything you can imagine. Dimensions:

• Length - 2.5 in. (63.5mm)
• Width - 0.25 in. (6.35mm)
• Height - 0.437 in. (11.1mm)

The PQ-6010-00 is the perfect option to replace and upgrade the nut on your Gibson electric guitar made before 2014. It is pre-slotted to make for a quick and easy install.
Dimensions:

• Length - 1.718 in. (43.64mm)
• Width - 0.193 in. (4.90mm)
• Height - 0.371 in. (9.41mm)
• E to E - 1.397 in. (35.47mm)
• Radius - 18 in.

Set of two Fender® high-quality melamine (simulated bone) string nuts with 9.5" radius, for use with most Fender instruments

This graphite nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size. It has a radiused bottom.

• Length = 2 1/64 inches (51.25mm)
• Height = 11/64 inches (4.55mm)
• Thickness = 1/8 inch (3.1mm)

The PQ-6000-00 is a great option to upgrade the nut on your Gibson style electric guitar. It is pre-slotted for a quick and simple install. Dimensions:

• Length - 1.713 in. (44.07mm)
• Width - 0.196 in. (4.98mm)
• Height - 0.329 in. (8.36mm)
• E to E - 1.398 in. (35.52mm)

Stratocaster guitar nut - plastic construction

The PQ-6116-00 is the perfect option to replace and upgrade the nut on your acoustic or electric guitar. It is pre-slotted to make for a quick and easy install. Dimensions:

• Length - 1.707 in. (43.36mm)
• Width - 0.192 in. (4.88mm)
• Height - 0.331 in. (8.41mm)
• E to E - 1.435 in. (36.45mm)

The PQ-M100-00 is a TUSQ nut blank specially designed to be used on Martin style guitars. It has an angled bottom and needs to be slotted. Dimensions:

• Length - 1.89 in. (48.01mm)
• Width - 0.226 in. (5.74mm)
• Height - 0.42 in. (10.67mm)

Plastic electric guitar nut.