Luthier Parts & Tools

Potentiometer - Bourns, Linear, Knurled Shaft
Bourns Linear Taper pots. Carbon Element, Split Shaft, Solder Lugs.
  • 24mm Body Diameter
  • ¼ watt
  • 300° rotation
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 250V
Please Log In to view prices
Potentiometer - Bourns, Audio, Knurled Shaft, Push-Pull, Mini
Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs.
This Bourns Guitar Potentiometer with Push-Pull Switch allows the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
  • 17mm Body Diameter
  • 300° rotation
  • Power Rating: 0.1 watt
  • ¼" Knurled 18-Spline Split Shaft
  • DPDT Push-Pull Switch
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 150V
Please Log In to view prices
Potentiometer - CTS, 500kΩ, Audio, Knurled, .75" Bushing, DPDT
Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel, etc. to your guitar without having to drill the holes for a mini switch. The shorter body height and side mounted contacts require far less space (1” depth ) making them ideal for thinner bodied guitars with a more shallow body cavity. These Split-shaft pots are compatible with 24- spline, fine knurled knobs and feature a precise audio taper. Hex nuts, flat washer, and lock washer are included with each pot. CTS DPDT pots are available in three types for different applications.
Please Log In to view prices
Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Short Bat
Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.
Please Log In to view prices
Potentiometer - Alpha, Reverse Audio, ⅜" Bushing
Standard fit for most vintage American made tube amps.
Please Log In to view prices
Switch - Switchcraft®, Slide, DPDT, Jazzmaster / Jaguar
Genuine Switchcraft® DPDT 2-position slide switch for use on Jazzmaster and Jaguar style guitars. Upgrade cheap or malfunctioning switches with these high quality replacements.
  • Recommended .75 control cavity depth
  • 1.125” center-to-center mounting hole spacing
  • Screws not included
  • See S-HS440-12 for compatible screws
Please Log In to view prices
¼" Jack - Switchcraft, Stereo, double open circuit, deep panel
Type 152B. ¼" Female Stereo Input Jack 3-conductor. Thick panel-mount jack with cable clamp. Brass finish.
Please Log In to view prices
Knob - Top Hat, Gibson Style see-through
Colors Available:
Gibson style top hat knob. Multiple color options available. Fits fine knurled pot shafts.
Please Log In to view prices
Magnet - Rod, Alnico 5, .187", Vintage Chamfer
Alnico 5 rod magnets with a .187” diameter. These magnets feature a vintage style chamfer and are not magnetized. Great for vintage Strat style pickups and many others.
Please Log In to view prices
Knob - Speed, Embossed Numbers, Gibson Style
Colors Available:
Gibson style speed knob with embossed numbers. For 6mm 24 teeth knurled shaft.
Please Log In to view prices
Jack Plate - for Telecaster guitars
Colors Available:
Avoid loose output jacks with this jack mount for Telecaster guitars. Includes two angled screws that ensure that the jack will be held tightly in place. Multiple color options available.
  • Capable of being screwed directly onto switchcraft jacks
Please Log In to view prices
¼" Jack - Rean, Mono, Open Circuit
2 pole open 1/4" jack, 2 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205" faston tabs
Please Log In to view prices
Switch - Les Paul 3 Position, US Retro-Fit
Cap Colors Available:
LP/PRS style 3 position pickup selector switch. M3.5 x 0.60 switch cap threading.
Please Log In to view prices
End Buttons / Pins - Grover, for quick-release Strap locks
Package of 2
Colors Available:
Replacement End Pins for Grover Quick-Release strap locks. These extra end pins can be mounted on all guitars making it possible to use just one strap! Smooth, polished parts will not damage or mark up
Please Log In to view prices
Machine Screw - 3-48 x 1-1/4”, Phillips, Pan Head
Colors Available:
Original, made in USA, 3-48 x 1-¼” machine screws. These premium screws are perfect for mounting humbucker pickups.
Please Log In to view prices
Potentiometer - CTS, Audio, Knurled Shaft, ¼" Bushing
CTS pots with a shorter ¼” bushing length that is perfect for pickguard mounted pots. These pots reduce the gap between the pickguard and bottom of the knob for a clean, near flush look. The shaft is a fine (24 tooth) knurl. Nut and lock washer are included.
The Series 450G Guitar Potentiometer is the same robust high-quality guitar potentiometer that has become the industry standard for top guitar manufacturers. Featuring reduced shaft wobble, low noise output, and smooth rotational feel, the Series 450G is supplied with standard tin-plated rear cover and solder lug terminals.
Please Log In to view prices
Potentiometer - Bourns, Linear, Knurled Shaft, Mini
Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
  • 17mm Body Diameter
  • ¼ watt
  • 300° rotation
  • ¼" Knurled 18-Spline Split Shaft
  • ⅜" Bushing Length
  • Tolerance: ±20 %
  • Maximum Operating Voltage: 200V
Please Log In to view prices
Wire Sleeving - Spaghetti, Old-Style, 11 AWG
Sold by the foot
Colors Available:
New!:
11 AWG White fiberglass sleeving is varnished and closely resembles early style spaghetti. 20 AWG available with part number S-M436W. This is a coated fiberglass sleeving made by applying a proprietary blend of acrylic polymers to a closely woven electrical grade fiberglass substrate. This sleeving has excellent electrical, chemical and oil resistance properties, excellent heat stability and flexibility for ease of push-up and recovery. It exhibits excellent resistance to oils, acids and alkalis and solvents.
Please Log In to view prices
Slug - 1215 Steel, 0.187" Diameter, for Humbucker Pickups
Colors Available:
Original, made in USA, steel slugs for making humbucker pickups. These premium slugs are made of 1215 steel. These parts are made using the same materials and processes as the most sought after vintage parts.
Please Log In to view prices
Potentiometer - Bourns, Dual MN Taper, Knurled Shaft
Dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
Please Log In to view prices
Knob - Top Hat, Embossed Numbers, Gibson Style
Colors Available:
Gibson style top hat knob with embossed numbers. Multiple color options available. Fits fine knurled pot shafts.
Please Log In to view prices
Potentiometer - Alpha, Audio, ⅜" Bushing
Standard fit for most vintage American made tube amps.
Please Log In to view prices
Selector Switch - Fender®, Pickups, American Strat 5-Way
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality 5-position pickup selector switch. Includes mounting screws, one white and one black switch tip.
Please Log In to view prices
Wood Screw - #3 x 1-3/8”, Phillips, Round Head
Original, made in USA, #3 x 1-3/8” wood screws. These premium screws are nickel plated and are perfect for pickups that are directly mounted to the guitar body such as P-90 and Thunderbird pickups.
Please Log In to view prices