Luthier Parts & Tools

Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.

High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.

• Measures 56 mm x 11 mm x 6.35 mm
• Sold individually

Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.

High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.

• Measures 52.5mm x 10mm x 4.95mm
• Sold individually

Gotoh locking nuts are superior quality locking nuts that directly replace original Floyd Rose and Floyd Rose style locking nuts. Top mount. Width: 1-11/16'' (43mm). Included: Retainer bar, screws, wrench. Locking nut for Floyd Rose tremolo units.

The PQL-5000-00 is a perfect option to replace and upgrade the nut in almost all Fender style electric guitars. It will work in both a flat bottom or curved bottom nut slot due to it's ingenious design.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:

• Length - 1.687 in. (42.85mm)
• Width - 0.128 in. (3.25mm)
• Height - 0.198 in. (5.03mm)
• E to E - 1.363 in. (34.62mm)

High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom feel and appearance.

• Measures 45mm x 10mm x 4.95mm
• Sold individually

The PQL-6011-00 is the perfect option to replace and upgrade the nut on your Gibson electric guitar made post-2014. It is slightly taller than the P-GNUT-TUSQ-EPS-3XL (pre 2015). When in doubt, use this one, you can always sand the bottom of the nut to adjust lower.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:

• Length - 1.725 in. (43.83mm)
• Width - 0.185 in. (4.69mm)
• Height - 0.405 in. (10.30mm)
• E to E - 1.408 in. (35.77mm)

Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.

• Length = 1 41/64 inches (41.52mm)
• Height #1 (fretboard side) = 13/64 inches (5.06mm)
• Height #2 (headstock side) = 13/64 inches (5mm)
• Thickness at bottom = 9/64 inches (3.46mm)
• Thickness at top = 1/8 inches (3.1mm)

The PQL-6060-00 is the perfect option to replace and upgrade the nut on your Epiphone guitar. It is also a great option for many other common acoustic and electric guitars. It comes pre-slotted to make for a quick and easy install.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:

• Length - 1.730 in. (43.94mm)
• Width - 0.239 in. (6.08mm)
• Height - 0.357 in. (9.08mm)
• E to E - 1.344 in. (34.14mm)
• Radius - 15 in.

The PT-4025-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 1/4" thick slab of Black TUSQ XL.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions: Length - 2.5 in. (63.5mm) Width - 0.25 in. (6.35mm) Height - 0.437 in. (11.1mm)

This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size. PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.

• Length = 1 23/32 inches (43.75mm)
• Height #1 (fretboard side) = 5/16 inches (7.81mm)
• Height #2 (headstock side) = 9/32 inches (7mm)
• Thickness at bottom = 15/64 inches (6.1mm)
• Thickness at top = 3/16 inches (4.78mm)

Original Fender pre-slotted bone nut for Teles and Strats.

Gotoh locking nuts are superior quality locking nuts that directly replace original Floyd Rose and Floyd Rose style locking nuts. Top mount. Width: 41mm (1 5/8") Radius: 360mm Included: Retainer bar, screws, wrench. Locking nut for Floyd Rose tremolo units.

The PQ-5042-00 is a great option to upgrade the nut on your Fender style electric guitar (or a guitar with similar specs). It is pre-slotted for a quick and simple install. It is 3/16" tall so make sure that is enough height for your guitar. Dimensions: Length - 1.653 in. (41.98mm) Width - 0.126 in. (3.22mm) Height - 0.196 in. (4.98mm) E to E - 1.388 in. (35.25mm)

The PQ-6010-00 is the perfect option to replace and upgrade the nut on your Gibson electric guitar made before 2014. It is pre-slotted to make for a quick and easy install.
Dimensions:

• Length - 1.718 in. (43.64mm)
• Width - 0.193 in. (4.90mm)
• Height - 0.371 in. (9.41mm)
• E to E - 1.397 in. (35.47mm)
• Radius - 18 in.

The PT-4187-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 3/16" thick slab of Black TUSQ XL.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:

• Length - 2.5 in. (63.5mm)
• Width - 0.187 in. (4.75mm)
• Height - 0.437 in. (11.1mm)

Genuine Fender® pre-slotted melamine nut for Telecaster and Stratocaster guitars. This nut has 9 1/2 in. top radius and 7 1/4" bottom radius with an overall length of 1.695 in.

The PQ-5000-00 is a perfect option to replace and upgrade the nut in almost all Fender style electric guitars. It will work in both a flat bottom or curved bottom nut slot due to its ingenious design, just sand off the tab for a curved bottom. It is pre-slotted to make for a quick and easy install. Dimensions:

• Length - 1.687 in. (42.85mm)
• Width - 0.128 in. (3.25mm)
• Height - 0.198 in. (5.03mm)
• E to E - 1.363 in. (34.62mm)

For a Tusq XL version of this nut, see P-GNUT-TUSQ-EPS-1XL.

The PQL-1204-00 is the perfect option to upgrade the nut on your Fender Precision style Bass guitar. It is pre-slotted making installation quick and simple.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:

• Length - 1.65 in. (41.91mm)
• Width - 0.125 in. (3.17mm)
• Height - 0.187 in. (4.75mm)
• E to G - 1.25 in. (31.75mm)

The PQL-1214-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:

• Length - 1.554 in. (39.47mm)
• Width - 0.128 in. (3.25mm)
• Height - 0.187 in. (4.75mm)
• E to G - 1.223 in. (31.06mm)

The PQ-6116-00 is the perfect option to replace and upgrade the nut on your acoustic or electric guitar. It is pre-slotted to make for a quick and easy install. Dimensions:

• Length - 1.707 in. (43.36mm)
• Width - 0.192 in. (4.88mm)
• Height - 0.331 in. (8.41mm)
• E to E - 1.435 in. (36.45mm)

The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Durability Slots wear down over time. Minimal wear.

The PQ-6000-00 is a great option to upgrade the nut on your Gibson style electric guitar. It is pre-slotted for a quick and simple install. Dimensions:

• Length - 1.713 in. (44.07mm)
• Width - 0.196 in. (4.98mm)
• Height - 0.329 in. (8.36mm)
• E to E - 1.398 in. (35.52mm)