Luthier Parts & Tools

Tremolo Stopper - Brass Block, Hex Screw, Allen Key
Brass tremolo stopper. Used as a floating bridge stop for Fender and Floyd Rose style tremolo systems. Prevents inadvertent vibrato effects produced by resting the picking hand over the bridge while playing. Allows for down-bends and prevents up-bends for a stabilized return of the whammy bar. Allen screw can be easily reversed to allow for a floating bridge setup again. Includes: (1) brass block (1.05" L x .39" W x .49" H) (1) allen key, 2 mm (1) allen screw (M4 x .70 thread, 20 mm length) (1) hex nut (M4 x .70 thread) (2) countersunk mounting screws (10 mm length)
Please Log In to view prices
Bridge - Gotoh, Tune-O-Matic, Studs / Bushings Post
Colors Available:
A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Threaded thumbwheel style studs and bushings and features hard zinc saddles. Hardware included.
Please Log In to view prices
Bridge - Gotoh, Modern, for Telecaster
Colors Available:
Designed to for use with the Telecaster® single coil pickup; this heavier brass bridge features six allen-adjustable brass saddles. Strings mount through the guitar body and all of the mounting screws are included. Hardware included.
Please Log In to view prices
Bridge Pin Set - Original Fender, for acoustic
Package of 7
Colors Available:
Set of seven slotted bridge pins for use with most Fender acoustic guitars as well as other manufacturers. Includes extra bridge pin and matching strap end pin.
Please Log In to view prices
Bridge - Gotoh, Vintage Tele, Cut-Down Sides, In-Tune Saddles
Colors Available:
Gotoh’s Telecaster bridge has the vintage look and mounting layout with a few modern additions: The In-Tune saddles give you the vintage look with unique grooves cast into the saddle to move the contact point of each string for more accurate intonation. Each saddle is reversible and can be used in any position. This gives you a huge advantage over traditional barrel style saddles that were never designed with precision intonation in mind. The brass saddles will give you that bright Tele twang! The stamped steel base plate’s cut down sides give you the unrestricted string access that many modern players prefer.
Please Log In to view prices
Bridge - Gotoh, Hardtail for fixed-bridge Strats
Colors Available:
For non-tremolo fixed bridge Strat® style guitars that have through-body string mounting. Steel saddle. Saddle intonation can be individually adjusted. Mounting screws included. Hardware included.
Please Log In to view prices
Thumbwheel - ABR-1 Style, Plated Steel, USA
Package of 2
Colors Available:
U.S. made vintage style ABR-1 thumbwheels. These steel thumbwheels feature high quality plating and are tapped for 6-32 threaded posts.
Please Log In to view prices
Bridge - Gotoh, Tune-O-Matic, Standard Post
Colors Available:
Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.
Please Log In to view prices
Tremolo arm - Fender®, for American Stratocaster
Original Fender® Stratocaster tremolo arm (also known as "whammy bar")
Please Log In to view prices
Tremolo springs - Replacement for Fender Style Tremolos
Tremolo tension springs. Similar to P-GTSPRN-5 but generic manufacture.
Please Log In to view prices
Tremolo Springs - Fender®, American Series
Package of 12
This spring helps set your tremolo arm in a fixed position when used with any Fender® American series or American Standard series tremolo. Simply insert spring into tremolo arm receptacle prior to installing tremolo arm. Package includes twelve tension springs. Used in Custom Shop, American Series, American Vintage, American Standard (USA), and Classic, Deluxe, and Road Worn® Series (Mexico) instruments.
Please Log In to view prices
Screws - Original Fender, Vintage Style Strat Bridge Mounting
Package of 12
Genuine Fender® vintage-style Strat bridge mounting screws. Some of Fender’s most requested replacement screws. Made for Fender® and used on a variety of vintage and contemporary models.
  • Set of 12 replacement screws
  • Genuine vintage specifications
  • Nickel plating
  • Phillips oval-head (6-32 x 7/16")
  • Used on American Vintage Stratocaster® guitars
Please Log In to view prices
Tremolo Arm - Wilkinson by Gotoh VS-100N
Colors Available:
Genuine replacement arm for the Wilkinson/Gotoh VS-100N Tremolo. Internally threaded, sturdy knobless .216"-diameter (5.5mm) stainless steel; extends approximately 5-⅝" (142.88mm). Sturdy VS-100N tremolo arm. Multiple color options available.
Please Log In to view prices
Bridge - Original Fender®, Vintage Style, Standard Strat
Vintage-style chrome bridge assembly for use on most Standard, Deluxe, Roadhouse™, Lone Star™, and Blacktop Stratocaster models manufactured from 2006-present. Includes six bent "Fender"-stamped saddles, intonation screws and springs, and saddle-height adjustment screws. Mounting hardware, tremolo claw, tremolo springs and tremolo arm not included.
  • 2-1/16" mounting spacing*
  • Standard 10/32 tremolo arm threading
  • For a variety of Stratocaster models (2006-present)

*Note that 2-1/16" bridge mounting spacing means that bridge-mounting screws will not fit vintage or vintage reissue instrument unless modified to do so.
Please Log In to view prices
Tremolo Arm - Fender®, Mexican Standard
Colors Available:
With white tip, for Mexican Standard Strat.
Please Log In to view prices
Bridge Saddle - Bone, Acoustic, Oversized, 83mm x 12mm x 6mm
High quality bone saddle blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance. Measures 83 mm x 12 mm x 6 mm. Sold individually.
Please Log In to view prices
Screws - Fender®, Saddle Height Screws
Package of 12
Set of hex set screws used for saddle-height adjustment on American Vintage series Stratocaster and Telecaster bridges.
  • Set of 12 hex set screws
  • For American Vintage Stratocaster and Telecaster guitars
  • Comes with four 4-40 x 3/8" hex screws and eight 4-40 x 5/16" hex screws.
Please Log In to view prices
Tremolo arm tip - Fender®, for capping tremolo arms
Package of 2
Colors Available:
Get better leverage and grip on your whammy bar by replacing the plastic tip, package of two.
Please Log In to view prices
Tremolo Springs - Fender®, Tension, Package of 5
Package of 5
Set of five Stratocaster® tremolo tension springs for use on American Vintage series and Custom Shop instruments.
  • Set of five nickel-plated steel tremolo tension springs
  • For American Vintage series and Custom Shop instruments
Please Log In to view prices
Retaining Wire - For Wired ABR-1, USA
U.S. made replacement retaining wire for wired ABR-1 bridges. Made of high quality spring steel. Fits our U.S. made bridges as well as Gibson spec bridges.
Please Log In to view prices
Bridge - ABR-1, Wired, Raw Brass Saddles, USA
Colors Available:
Made in U.S. vintage-spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with raw brass saddles. Mounting hardware sold separately. For a full set with all hardware included, please see P-GKLU-KLP128X. The bridge features the vintage-style retaining wire that secures the raw brass saddles and intonation screws onto the bridge.
  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
Please Log In to view prices
Bridge - Gotoh, 12-String, for Electric Guitar
Colors Available:
Gotoh 12-String Bridge for Electric Guitar – This Twelve string bridge for Electric Solidbody guitars allows each string to be individually adjusted for intonation. Hardware included.
Please Log In to view prices
Bridge - Gotoh, Floyd Rose® licensed
Colors Available:
The Gotoh GE1996T is a high end locking tremolo licensed by Floyd Rose. This version of the locking tremolo is a premium option that is great for new installs or upgrading original units. The hardened steel saddles and patented stud lock technology ensure a rock solid performance. Springs, spring claw, and all mounting hardware are included along with two hex wrenches for dialing in adjustments. 40mm block.
Please Log In to view prices
Vibramate - Mini Grip for Floyd Rose Style Locking Tremolos
The Vibramate Mini Super Grip is custom made specifically to fit the arm of locking tremolo systems (like Floyd Rose). The textured design adds contour to the overall grip and a soft comfortable feel for subtle vibrato techniques. The Vibramate Super Grip easily slides onto your existing tremolo arm without any modifications or special tools. The tapered design ensures a snug fit once installed but can be removed just as easily by sliding it back off. Made in USA.
Please Log In to view prices