Knobs

For current JVM and older JCM2000 or any 1/4" D-Shaft potentiometer

High-quality USA made knobs from Davies Molding. The Davies 1700 is made of solid phenolic and has a classic style that fits nicely on any piece of equipment. The 1700 can be found on vintage radios and amplifiers, most notably the Filmosound projector amps that are popularly converted to guitar amplifiers.

• Height: 0.59 in.
• Diameter: 0.75 in.
• Fits ¼" shaft with set screw

Genuine Dunlop / MXR knob for use with T18 knurled pot shafts. This is a smaller version of the classic MXR knob P-ECB-130. This knob is great for use on projects where a stylish knob is needed and space is limited.

Original Fender knobs for the Telecaster. Chrome Dome.

Original Fender chicken head knob. Black, comes in a package of six. Set screw. For 1/4" solid shaft pots.

High-quality USA made knobs from Rogan Corp. These medium pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.68 in.
• Diameter: 0.50 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K272P-W. A variety of different sizes are available from the PT Series.

Solid wood knobs in the art deco style found on many D'Angelico guitars. The three inlaid lines serve as the indicator. Fits 6mm T24 (fine) knurled shafts.

• Height: 0.6 in.
• Diameter: 0.975 in.
• Fits T24 Knurled Shafts

High-quality USA made knobs from Rogan Corp. These extra large, puck-shaped, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.63 in.
• Diameter:1.25 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.

High-quality USA made knobs from Rogan Corp. These large, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.71 in
• Diameter: 0.73 in
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.

Genuine Dunlop / MXR large aluminum knob for use with T18 knurled pot shafts. This rugged aluminum knob features a white indicator line and a diamond cut knurl for grip when using it. This high end knob looks great on pedals, amplifiers, and other projects.

Genuine Fender® dual concentric knobs for the 1960 Jazz Bass. The bottom knob fits ¼” solid shafts and the top knob fits 3/16” solid shafts. Both attach with their included set screw. Top and bottom sold separately.

Original Fender Amplifier Knobs. Rotary "1-10" Numbered Style for push-on D-shaft. Silver cap. Package of 4. 7/8" D x 3/4" H.

Original Fender Knob spacers, for use with push-on knobs. Bushings slide over pot shafts and stabilizes the shaft.

Phenolic skirted knob with set screws and brass insert. This massive knob is a close match for the classic knobs used on Fairchild compressors like the 660 / 670. It features a V-shaped painted inlay indicator on the skirt as well as a dot indicator on the top of the grip. The large skirt has a diameter of 1.935 inches. Fits ¼” (6.35mm) pot shafts. Pairs nicely with P-K347-X (see photo)

Metal knobs with set screws and brass insert. This knob is a close match for the lower section of the dual concentric knobs used on Marconi radios and Neve consoles. It features an inlay indicator line and a diamond pattern grip. The diameter is 0.99 inch. Pairs with P-K396-X . Fits ¼” (6.35mm) pot shafts.
Note: Knob is sold separately

High-quality USA made knobs from Rogan Corp. These large, puck-shaped, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.45 in.
• Diameter: 0.84 in
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.

Sold individually. See P-K368X for knob caps

Genuine Fender replacement knob cap for S-1 switch, which can be retrofitted to nearly any U.S.- and Mexico-made Stratocaster manufactured from 1954-present.
Direct Replacement for P-K358X

Original Marshall, brown with gold cap, push on. 5/8" height. For 18 teeth knurled pot shafts. Used on the MG100HDFX, G100RCD, and other models. Sold individually. Note: The brown color found on the body of the knob is very subtle.

Plastic chicken head knobs for coarse knurled shafts. These tiny chicken head knobs are great for pedal builds or cramped face plates. They feature an inlay indicator line. The total length of the chicken head is 0.93 inches. Fits T18 knurled shafts.

USA made vintage 90 degree blunt tip pointer washer made from steel. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs.

Genuine Fender® Pure Vintage Radio Amplifier Knobs. From tone and volume knobs to pickup covers, bridge covers and more, Pure Vintage knobs and covers let you cosmetically customize your instrument or amplifier like never before. These genuine replacement parts are created with period-correct personality in mind to the same specifications as early Fender parts, allowing players to give any Fender amp, guitar or bass a shot of vintage-accurate looks and tone.

• Set of six ribbed replacement amplifier control knobs with indicator lines
• Introduced on Blonde and Brown-era amplifiers
• Used on '63 Fender Tube Reverb, Vibroverb and Vibro-King® amplifiers
• Fits most 1/4" solid shaft potentiometers on vintage and modern amplifiers and guitars

High-quality USA made knobs from Rogan Corp. These medium pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.

• Height: 0.68 in.
• Diameter: 0.50 in.
• Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K282P-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272PS-W 2PS Medium Skirted Pointer

High-quality USA made knobs from Rogan Corp. These medium, skirted knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.84 in.
• Diameter: 0.62 in.
• Fits 6mm D Shafts
• No indicator

A variety of different sizes are available from the PT Series.