Knobs

Plastic knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line and a clear plastic skirt. The skirt diameter is 1 inch. Fits ¼” (6.35mm) pot shafts. For a non-skirted version see P-K398-X.

Extra large phenolic pointer knobs with a set screw and brass insert. These distinctive pointers are close matches for the classic knobs used on Fairchild compressors like the 660 / 670. Each pointer features a V-shaped painted inlay indicator. Fits ¼” (6.35mm) pot shafts.

• Grip Diameter: 1.010 in.
• Skirt Diameter: 1.492 in.
• Length: 2.305 in.
• Height: 0.819 in.

Original Orange™ amp knob with hex set screw. Fits 6 mm diameter shaft. Black top-hat style knob with with white dot indicator.

Genuine Fender® Pure Vintage Radio Amplifier Knobs. From tone and volume knobs to pickup covers, bridge covers and more, Pure Vintage knobs and covers let you cosmetically customize your instrument or amplifier like never before. These genuine replacement parts are created with period-correct personality in mind to the same specifications as early Fender parts, allowing players to give any Fender amp, guitar or bass a shot of vintage-accurate looks and tone.

• Set of six ribbed replacement amplifier control knobs with indicator lines
• Introduced on Blonde and Brown-era amplifiers
• Used on '63 Fender Tube Reverb, Vibroverb and Vibro-King® amplifiers
• Fits most 1/4" solid shaft potentiometers on vintage and modern amplifiers and guitars

Small plastic control knobs with set screw and brass insert. These unique knobs have a subtle retro design that works well in many applications. They have a fine vertical knurl and a raised top with an infilled indicator line. Fits ¼” (6.35mm) pot shafts. For a larger version of this knob, see P-K411-X.

For current JVM and older JCM2000 or any 1/4" D-Shaft potentiometer
For a similar generic knob, see P-K393.

High-quality USA made knobs from Rogan Corp. These large, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.71 in
• Diameter: 0.73 in
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.

Black Gibson style top hat knobs with silver caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.

Anodized aluminum knob with channeled indicator line and set screw. This slim, solid aluminum knob has a diamond knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.

• Height: 0.56 in.
• Diameter: 0.496 in.
• Fits ¼" shaft with set screw

Black pointer with white line. Fits a 3/16" knurled shafts. Push on Peavey part: 70902145

Plastic chicken head knobs for coarse knurled shafts. These tiny chicken head knobs are great for pedal builds or cramped face plates. They feature an inlay indicator line. The total length of the chicken head is 0.93 inches. Fits T18 knurled shafts.

Solid aluminum knobs with set screws. These circular knobs are a close match for the classic knobs used on Baldwin-Burns guitars and effects such as the Buzzaround. They feature a solid aluminum construction with a concave top and a vertical knurl for grip. Fits ¼” (6.35mm) pot shafts.

• Height: 0.442 in.
• Diameter: 0.722 in.
• Fits ¼" shaft with set screw

Original Fender chicken head knob. Black, comes in a package of six. Set screw. For 1/4" solid shaft pots.

The P-K801-BRASS is a custom built Davies 1900H clone. This knob features a brass insert in addition to a thick plastic build resulting in the most solid version of this knob available. The thick plastic eliminates the unfortunate hairline fractures that can commonly be found near the set screw of other versions. The P-K801-BRASS has an infilled painted indicator and fits ¼” (6.35mm) pot shafts.

Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.75”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K656-X. For a brushed finish version of this knob, see P-K310X.

High quality Marshall style knobs with set screws. These knobs are available with the classic gold and silver top caps as well as an all black version. These knobs use a slotted set screw and fit 1/4 in. (6.35mm) pot shafts. 0.77" diameter x 0.62" tall.

High-quality USA made knobs from Rogan Corp. These extra large, puck-shaped, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.63 in.
• Diameter:1.25 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.

This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs are made from a solid mold, feature a slotted set screw, and fit ¼" solid shaft potentiometers. Davies 1470 clone.

Dial plates with 0-100 indicator marks. These plates are a simple way to add panel graphics to controls. They are easy to install beneath the nut of a potentiometer like a washer. The silk screened graphics on the brushed metal plate gives projects a clean and professional appearance. 40mm Dial Plate

• 40 mm (1.575”) outer diameter
• 9.95 mm (0.392”) inner diameter
• Best for 25.4mm (1”) or smaller knobs

60mm Dial Plate

• 60mm (2.362”) outer diameter
• 9.95mm (0.392”) inner diameter
• Best for 40.6 mm (1.59”) or smaller knobs

Mini fluted knob with infilled indicator line. Pairs well with the larger P-K850X. Fits ¼” (6.35mm) pot shafts.

• Height: 11mm
• Diameter: 15mm
• Fits 1/4" shaft with set screw

High-quality USA made knobs from Rogan Corp. These phenolic knobs feature a brushed aluminum inlay, a small skirt and an infilled indicator line. 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.

• Height: 0.62 in.
• Diameter: 0.84 in.
• Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-2 0-10 Witch Hat P-K155-3 Large Witch Hat w/ Arrow

Original Fender Replacement Knobs For Strat. Push-On. Fits both coarse and fine knurled pots.

This nickel-plated brass adapter sleeve converts a 0.125 in. (3.17mm) shaft potentiometer to ¼" shaft (6.35mm), allowing for ¼" knobs to be used on a wider range of potentiometers. The cutout on the sleeve allows the set screw of the knob to secure directly to the shaft of the pot. Depending on the knob used, a longer set screw can be required.

High quality miniature chicken head knob for coarse knurled shafts. 0.90" long nose to tail. Mini Davies 2300 clone. Fits T18 knurled shafts. For a solid shaft version of this knob, see P-K900X.