Kits & Effect Pedals

Are you a DIY'er and enjoy building your own gear? Our kits range from beginner to advanced skills, so there is something for everyone!
Amp Kit - MOD® Kits, MOD101 guitar amplifier
MOD 101 Guitar Amp Kit Features:
  • All Tube Design (solid-state diodes used only for full-wave rectification)
  • 60W output power into 4, 8, 16 and 20 Ω
  • 1 channel with customizable: tone stack, power tubes, negative feedback, input miller capacitance volt divider/LP filter, and preamp cathode bypass cap (all parts included)
  • Vintage channel controls: bass, treble and volume
  • Vintage pilot lamp and screw-on jewel cover for power-on indication
  • DPDT power switch circuit for instant high-voltage drain in power-off
  • Standby Switch
Please Log In to view prices
Effects Kit - MOD® Kits, The Wave, Spring Reverb
The Wave is a versatile stand-alone, tube driven analog spring reverb unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The "dwell" control adjusts the input signal level driving the tank and the "reverb" control adjusts the level of output reverberations from the tank. The Wave's all tube design utilizes four dual triode vacuum tubes - three 12AX7s and one 12AT7 - and comes with a MOD® three-spring reverb tank. MOD® reverb tanks are deemed the closest to the original reverb tanks from the '60s made today. The Wave's reverb function can be switched in and out pop-free via the front panel toggle or with a footswitch. Footswitch sold separately (see P-H470 for compatible footswitch).
Please Log In to view prices
Amp Kit - MOD® Kits, MOD102+ guitar amp
The MOD102+ expands on the same all analog vacuum tube classic American circuit design combined with a British style Class A output section as the Original MOD102 with some much added special “+” features. These special features include a three position progressive toggle switch for off-standby-power and additional push-pull functionality for each control - pull out the bass control knob for “mid boost”, pull out the treble control knob for “bright”, pull out the volume control knob for “turbo”.
Please Log In to view prices
Amp Kit - MOD® Kits, MOD102 guitar amplifier
The MOD 102 is a great place to start for those interested in building their own tube amp. It is based on a classic American tube-circuit design combined with a British style Class A output tube section. At low volume it produces a clean chimey tone that moves into smooth overdrive at higher volumes. All parts are included along with a pre-drilled steel chassis, wire and tubes (1 EL84 and 1 12AX7). Puts out at least 5 watts. The chassis layout is open for easy assembly using the clear, easy to follow instructions.
Please Log In to view prices
Effects Pedal - Maxon, OD9, Overdrive
Improved circuitry featuring the JRC4558 IC yields the ultra-smooth, creamy, dynamic overdrive so sought after by guitarists.
Overdrive and output level controls adjust the intensity of overdrive and output volume, while the Hi Boost/Hi Cut Tone control adjusts the brightness from warm and smooth to sizzling hot.
While the M-OD808 may have been the first overdrive circuit of its kind, it was the OD-9 that cemented this sound in the history of Rock & Roll guitar. Looking at the OD-9's circuit, you'll realize that this is not some redesign being cleverly marketed as a reissue – this is THE original OD-9 (TS-9) circuit, yet with the addition of true bypass switching.
Please Log In to view prices
Effects Pedal - Maxon, OD808, Overdrive
The Original Overdrive! The OD808 is often imitated but never matched! Identical to the 1970s circuit and featuring the JRC4558 IC chip, it offers warm, smooth, transparent overdrive that'll make your rig scream! The OD808's dynamically responsive circuitry reacts precisely to individual playing styles, letting the true voice of any instrument or artist shine through. Don't settle for copies when you can have the original. The OD808 Reissue offers up all the warm, creamy, organic overdrive as the original and then some. Never one to rest on their laurels, Maxon has tweaked the current version ever so slightly to reduce noise level while retaining the legendary “808" tone. The OD808 is the perfect pedal for adding smooth, tube-like overdrive to any clean amp – use it as a secondary dirt channel to beef up a song's chorus section, or keep it on all the time for the crunchy tone that has defined rock and roll.
Please Log In to view prices
Effects pedal - Tube Amp Doctor, F.A.N.T.A. Speaker Emulator
The F. A. N. T. A. (Frequency Adapted Natural Tone Accessory, say: 'FANTA') Speaker Emulation is a low impedance, balanced symmetric, transformer coupled output. It gets wired between the speaker output of your amp and the speakers and does not require any power supply or battery. The F.A.N.T.A. provides a 3-pin XLR-Connector for a standard microphone cable to connect to the mixing console, recording system etc. The signal runs through a sophisticated speaker emulation which features a revolutionary unique quality: The emulation is reacting to your playing style!
Please Log In to view prices
Effects Pedal - ProCo, Rat-2, Distortion
The RAT2 is the classic distortion pedal in the Pro Co RAT family. It has a unique tone structure that other effect devices are measured against. The beauty of the RAT 2 lies in its versatility. Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads.
Please Log In to view prices
Power Supply components - Ham Nation, Bob Heil
Kit components for the Ham Nation Power Supply project. From HAMNation episodes 290, 291, 292, 293, 294, and 295
Please Log In to view prices
Effects Pedal Kit - MOD® Kits, Suspended Chime, Chorus, Delay
The Suspended Chime has two powerful effects in one pedal - chorus and chorus/delay. The Suspended Chime features a blend knob which allows you to go from subtle to lush chorus effect in either set up. Using the selector switch, you can add a 190 millisecond delay to the chorus introducing special depth to your tone. Varying the dry/wet mix can fatten your rhythms or produce a shimmering 12-string sound. The Suspended Chime kit comes equipped with an LED indicator and industry standard 9 volt center negative power jack. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All effects pedals operate on a 9V battery.
Please Log In to view prices
Effects Pedal Kit - MOD® Kits, The Persuader Deluxe, Overdrive
The Persuader Deluxe utilizes a Darlington preamp to push cascaded triode vacuum tubes into distortion. A boost switch provides an additional layer of flexibility with added gain and a little extra bottom end. An LED indicator lights up when the Persuader Deluxe is engaged and not in true bypass mode. Operates on a 9V battery or AC adapter, which is not included. When completed, this pedal draws considerable current and battery life will be short. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
Please Log In to view prices
Effects Pedal Kit - MOD® Kits, The Verb Deluxe, Digital Reverb
The Verb Deluxe kit is built around the Belton Digi-Log Mini Module (P-RBTDR-2H-X) for a great digital reverb sound. The Belton Digi-Log module was built as a replacement for traditional spring reverberation units. Features include both Dwell and Mix controls, allowing the dry signal to be blended with the processed signal from a just hint of reverb to deep, cavernous echoes. The dwell control adds an extra flexibility, providing a full palette of sweet reverb sound. The effect pedal operates on a 9V battery. For a longer lasting option, a 9-volt adapter can be purchased separately. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
Please Log In to view prices
Effects Pedal Kit - MOD® Kits, The Persuader, Tube Drive
Build your own tube preamp pedal built around a 12AX7 tube. Go from clean, warm tone to smooth, real tube overdrive. This kit includes pre-drilled die-cast aluminum enclosure and all parts with easy to follow instructions.
Please Log In to view prices
Effects Pedal Kit - MOD® Kits, The Aggressor, Distortion
The Aggressor is a high-gain distortion pedal kit that delivers contemporary distortion with plenty of chunk and ear-splitting pitch harmonics. The distortion effect goes from subtle break-up to over-the-top molten distortion at maximum gain.
The Aggressor features true bypass, LED indicator, and a versatile tone control with a scoop/bump switch that shifts the mid-frequency response, allowing you to craft a tone that fits your style of playing. It works well with humbuckers and single-coil pickups, so you can turn any guitar into a lethal weapon capable of inflicting serious brain damage and spontaneous combustion!
MOD® Kits are designed to give novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy-to-follow instructions and use point-to-point wiring. A pre-drilled enclosure and all necessary parts are included.
Please Log In to view prices
Effects Pedal Kit - MOD® Kits, Erratic Clutch Deluxe
The Erratic Clutch Deluxe is a unique effect pedal kit that gives you fuzzy square wave distortion as well as a monophonic sub-octave square wave using a total of only four transistors. The two signals can be used individually or mixed together for a raw and sonically rich synthy output. Full of character and quirk, this pedal will give you a truly original sound. The middle knob is the bias control. This adjusts the pulse width in the initial fuzz stage of the pedal. Set this knob to fit your pickups and playing style. The closer to the center the longer the note will sustain but with that comes more chaotic tracking for the divider. Moving it more clockwise or counterclockwise will give you more predictable note tracking on the divider with less sustain.
Please Log In to view prices
Radio Kit - 2 Tube Regenerative Radio
This radio kit will cover the AM radio band along with the SW radio band. Power for this receiver is 1.5 V DC for the filaments and 45V DC for the plate current. A D cell and five 9V transistor batteries wired in series will work to power this radio. A 2000 ohm headset or an audio amplifier is required.
Requires two T-1T4_DF91 tubes (not included).
Please Log In to view prices
Pine Board AM Transmitter components - Ham Nation, Bob Heil
Kit components for the Ham Nation AM Transmitter project.
Please Log In to view prices
Kit - Fender® Stratocaster® Mid Boost Kit
Genuine Fender® Mid Boost upgrade kit for Strats with active electronics. This circuit is used in the signature Eric Clapton and Buddy Guy strats and is commonly referred to as the Clapton Boost. The Mid Boost knob adjusts gain from 0 dB (no boost) to 25 dB (maximum boosted mids). This boost sounds great clean and adds powerful control to distortion.
Please Log In to view prices
Effects Pedal Kit - MOD® Kits, Tone Attack, Active Tone Stack
Shape your sound with the Tone Attack. 12 o'clock settings give an approximate unity gain with the pedal. Rotate the treble or bass knob counterclockwise to cut the corresponding frequencies. Rotate these same knobs clockwise to boost the frequency bands. The master boost knob can be used to attenuate your signal or push your tone to screaming loud volumes. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. The Tone Attack operates on a 9V battery or AC adapter, which is not included. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
Please Log In to view prices
Guitar Wiring Upgrade Kit - Mod® Electronics, ES-335 Standard
The K-GMOD-6 is a vintage style wiring kit for ES-335 guitars. Use this kit to upgrade your current ES-335 electronics to high quality parts. This kit also includes a treble bleed mod for the volume pots to enhance clarity with lower settings and comes with detailed instructions and all the parts you need to make your modification.
Please Log In to view prices
Effects Pedal - TWA, Flyboys FB-03, Echo
The TWA Flyboys FB-03 is a massive sounding delay pedal in a tiny package. This pedal takes you from the snappiest slapback sounds to big spacious delays with over 600 milliseconds of delay time. The bright and articulate delay signal keeps the mix crisp and transparent while the repeats add a touch of modulation for a warm tape like sound as the signal decays. The FB-03 Echo can go from one repeat to infinite repeats putting the pedal into self oscillation for wild feedback effects. The FB-03 Echo also features a true bypass footswitch and comes with a DC jack to battery clip converter cable.
  • 9VDC 2.5mm Barrel Connector
  • 42mA maximum current draw
  • True bypass switching
  • 20 – 620 ms delay time
  • Self oscillating
  • Extruded aluminum chassis
  • Quality components
  • 1.75” x 3.75” footprint
Please Log In to view prices
Effects Pedal Kit - MOD® Kits, Thunderdrive Deluxe LTD
The Thunderdrive Deluxe LTD is an overdrive pedal kit that will provide a strong clean signal boost in the early gain settings and smooth distortion at maximum gain settings. Adjusting output and distortion controls provides a wide variety of tones in spite of its simple construction. It is capable of overdriving the preamp section of your guitar amp or adding its own layer of distortion at lower volume. This version is equipped with a three position diode selector switch.
The switch offers three different settings and tones. The top position is the classic silicon clipping diodes used in the original Thunderdrive. The middle position gives you the lifted diode "turbo" sound from the Deluxe model. The bottom position is a new setting limited to this version using germanium diodes for a warm vintage distortion.
Please Log In to view prices
Guitar Wiring Upgrade Kit - Mod® Electronics, SG Standard
The K-GMOD-7 is a vintage style wiring kit for SG guitars. Use this kit to upgrade your current SG electronics to high quality parts. This kit also includes a treble bleed mod for the volume pots to enhance clarity with lower settings and comes with detailed instructions and all the parts you need to make your modification.
Please Log In to view prices
Effects Pedal Kit - MOD® Kits, The Saturator
The Saturator is an overdrive pedal kit that can cover a wide range of gain effects, transitioning smoothly from a massive clean boost to a warm and saturated distortion with the turn of a knob. The saturation is controlled with the "Soak" knob, which dials in the amount of symmetrical soft-clipping applied to the guitar signal. When fully counterclockwise , the signal is unaffected and clean. Rotating the knob clockwise will incrementally increase the soft-clipping, morphing from a clean signal through subtle-to-heavy saturated overdrive sounds and straight into distortion territory. The "Level" knob sets the overall volume of the clean or saturated output. Unity gain is at roughly 8 o'clock. With the "Soak" set to clean, rotating the "Level" knob clockwise will increase the level to upwards of 30dB.
Please Log In to view prices