Jacks & Plugs

Jack Plate - Marshall, Mono or Stereo
Mono or stereo jack plate for back of cabinets.
Please Log In to view prices
Jack Plate - Marshall, Switchable Stereo / Mono
Switchable stereo/mono jack plate for back of cabinets.
Please Log In to view prices
Jack Plate - Plug and Play, Mono / Stereo
The Plug and Play eliminates the confusing switch found on most stereo cabinets. Just pick your impedance and plug in. Label is set at the common 4/16 Ohm Mono and 8 Ohm Stereo. Ready to install with a steel dish, wires, and speaker connectors.
Please Log In to view prices
¼" Plug - Amphenol, Mono, Right Angle, SwitchPlug™, Large
The Amphenol T series SwitchPlug™ uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals.
Please Log In to view prices
¼" Jack - Switchcraft, Acoustic End Pin, Mono / Stereo, Nickel
High quality acoustic end pin style jacks from Switchcraft. These nickel plated jacks have three conductors, a strain relief clamp, and a threaded shroud for a professional looking wiring job. The special strap nut can be removed to reveal a hex nut that can be used for external tightening of the jack.
Please Log In to view prices
XLR Adapter - Amphenol, Male To Male, Nickel
XLR 3 pole male to 3 pole male adapter, pre-wired, metal shell. Nickel. Features:
  • Adapter pre-wired for convenience
  • 120 ohm terminators
Please Log In to view prices
XLR Jack - Switchcraft, premium, circular panel-mount
C Series Circular Panel Mount 3 Pin XLR Female, mounts with #5 Screws (Not included) - Silver Pins / Nickel Finish.
Please Log In to view prices
¼" Plug - Amphenol, Mono, Straight, SwitchPlug™, Large
The Amphenol T series SwitchPlug™ uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals.
Please Log In to view prices
Jack Plate - Electrosocket, for Tele, chrome plated brass
This modern cupstyle Tele® jackplate is milled from brass and has a shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!
Please Log In to view prices
¼" Plug - Amphenol, Mono, Jumbo, Thermoplastic, Satin
1/4" JUMBO mono plug, thermoplastic backshell, satin finish. Features:
  • Cable O.D. 7.5mm to 10.5mm (0.295" to 0.413")
  • Stylised Shell design with ergonomic grip
  • Robust diecast shell
  • Great solderability with increased solder area
  • Precision machined contacts
  • Quick and easy assembly
  • Nickel contact-plating
Please Log In to view prices
¼" Plug - Amphenol T-Series, Mono, Nickel
Amphenol "T-Series (Pro Range)" Phone Plug. 1/4" Mono straight plug with large Jaws cable clamp, metal backshell and black finish. Internal cable clamp fits cable outer diameters ranging from 0.236” to 0.295” (6 mm to 7.5 mm).
Please Log In to view prices
¼" Jack - Switchcraft, Mono, Open Circuit, Gold Plated
Genuine Switchcraft Type 11 ¼” jack with complete gold plating. All metal parts are gold plated including the washer and nut.
Please Log In to view prices
¼" Plug - G&H, Stereo, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in the USA. Unique design and molded construction eliminates the need for an additional insulator over the ground tab, making it much easier to solder.
Please Log In to view prices
¼" Plug - Amphenol, Right Angle, Mono, Gold Contacts
2-pole 1/4" professional right-angle phone plug, gold contacts, black shell. Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.
Please Log In to view prices
¼" Plug - Straight, Used with F-Cap on Fender amps
Fender style 1/4" straight mono (tip-sleeve) open plug. Use with F-cap cover (P-H55F). Perfect for use as "open" plug for Fender "Hot Rod" and "Blues Reissue" amps having both "Main Speaker" and "External Speaker" jacks allowing you to connect an alternate speaker impedance with the open plug inserted in the "Main Speaker" jack (speaker load configuration 3).
Please Log In to view prices
¼" Jack - Pure Tone, Stereo, Double-Open Circuit, Long Thread
Pure Tone’s new long threaded three pole (stereo) 1/4" jack provides full contact for improved connections and signal integrity. This jack locks the cable securely into place creating a greater surface area connection to carry more signal for an improved frequency stability. This jack is a great choice for both mono and stereo applications as well as guitars using active electronics.
Please Log In to view prices
XLR Adapter - Amphenol, 3-Pole Female To Male
XLR 3 pole female to 3 pole female adapter, pre-wired, metal shell. Nickel. Features:
  • Adapter pre-wired for convenience
Please Log In to view prices
¼" Jack - Switchcraft, Stereo, double open circuit, deep panel
Type 152B. ¼" Female Stereo Input Jack 3-conductor. Thick panel-mount jack with cable clamp. Brass finish.
Please Log In to view prices
¼" Plug - G&H, Mono, Jumbo, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in America. For large wire, 8-12 gauge speaker cable.
Please Log In to view prices
Jack Plate - Marshall, for Input Jack On Speaker Cabs, Plastic
Plastic jack cup for input jack on speaker cabinets.
  • Diameter = 3 3/4''
  • Center to Center Screw Hole Spacing Distance = 2 1/8''
Please Log In to view prices
¼" Plug - Amphenol, Straight, Mono, Gold Contacts
2-pole 1/4" professional straight phone plug, gold contacts, black shell. Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.
Please Log In to view prices
¼" Plug - Switchcraft, Mono, 2-conductor, heavy-duty jumbo
Switchcraft Type 188 Jumbo Plug. ¼" Mono 2 Conductor Heavy Duty Cable Mount Plug - Nickel Finish.
Please Log In to view prices
¼" Jack - Peavey, Mono, PC Mount, non-insulated
12 ½" mm, mono, non-insulated, rean, PC mount.
Please Log In to view prices
¼" Plug - Lava, Low Profile, Solder, Straight
High quality made in USA ¼” plugs from Lava Cable. This straight plug features an ultra low profile and a unique soldered connection that provides a quicker assembly than standard soldered connectors. The insulation system used in the plugs ensures a solid connection that is nearly impossible to short Lava Soldered Straight Connectors are the smallest profile soldered plugs on the market today at only .405” in width and .515” in outer diameter. Soldering is easy with just one small solder point. Included insulators prevent shorting. To assemble:
  • Slide the end cap over a 0.195” OD cable with the larger threaded opening facing the end that will be soldered.
  • Strip 0.75” of the outside jacket from the end of the instrument cable.
  • Feed the stripped end including the shield braid through the large black plastic insulator tube.
Please Log In to view prices