Jacks & Plugs

Ferrule - for Cliff UK Jacks, Black Plastic
Genuine Cliff ferrule for internal thread S4 jacks (3/8-20). This matte black ferrule works great with the S-H960-X washers to provide a unique look for inputs on amplifiers, pedals, and other equipment.
Please Log In to view prices
Jack Plate - Marshall, for Input Jack On Speaker Cabs, Plastic
Plastic jack cup for input jack on speaker cabinets.
  • Diameter = 3 3/4''
  • Center to Center Screw Hole Spacing Distance = 2 1/8''
Please Log In to view prices
Bezel / Nut - Cliff, For S4, Combined Nut / Bezel, Black
Genuine Cliff™ replacement combination nut/bezel for S4 Series jacks.
  • 3/8” thread diameter/20 TPI
  • 3/16” thread length
  • 7/16” nut
  • Used on many Marshall amps
  • Matte black finish
  • Sold individually.
Please Log In to view prices
XLR Plug - Switchcraft, premium, cable-mount
Switchcraft XLR 3-Pin Cable Mount Plug (Type A3F) Nickel body. Silver contacts. Latchlock. The original A Series premium XLR connector with adjustable dual pressure plate cable clamp, flexible strain relief, and removable pin insert. Cable-mount with silver pins. Nickel. Provides secure cable lock and strain relief for all standard size cables. Specifications Construction Sturdy, die-cast zinc with satin nickel finish to withstand hard use - even abuse. Insert Insulation High-impact, molded thermoplastic provides high dielectric strength, and superior insulation resistance. Locking Latchlock on female plugs and receptacles locks into groove in mating male connector to prevent accidental disconnect.
Please Log In to view prices
¼" Jack - Mono, Double Tip, Switched Tip, for Peavey, Insulated
TS jack for Peavey with a switched tip connection. This jack features an additional tip connection used in some Peavey amps. 2 tip HID (High Definition), insulated, plastic bushing.
Please Log In to view prices
Nut - Dress Nut, Slotted, ⅜”-32 UNEF, for Jacks & Pots
Slotted dress nut for ⅜”-32 threaded bushing such as standard Switchcraft ¼” jacks and CTS potentiometers. These plated brass nuts add a sleek look to any amplifier, pedal or guitar. This style of nut has a similar look to slotted round nuts found on plexi Marshall amps.
Please Log In to view prices
F-Cap - Plastic Cap for Straight Plug P-H55
F-cap, black plastic. Similar to that used on old Fender ® amps.
Please Log In to view prices
¼" Jack - Marshall, PC Mount, 5 Pin, Effects Loop Send
Genuine Marshall SKTP-00005 jack. This 5 pin jack is used as the send jack of the effects loop of some Marshall amps such as the JCM2000. Nut and washer are not included with this jack. The bushing is M12 x1.0 thread.
For return jack, see S-H562
Please Log In to view prices
¼" Plug - Neutrik, nickel body, nickel contacts
1/4" professional phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
Please Log In to view prices
¼" Plug - Lava, Low Profile, Solder, Right Angle
High quality made in USA ¼” plugs from Lava Cable. This right angle plug features an ultra low profile and a unique soldered connection that provides a quicker assembly than standard soldered connectors. The insulation system used in the plugs ensures a solid connection that is nearly impossible to short. Lava Soldered Right Angle Connectors are the smallest profile soldered plugs on the market today at only .405” in width and .515” in outer diameter. Soldering is easy with just one small solder point. Included insulators prevent shorting. To assemble:
  • Strip 0.75” of the outside jacket from the end of the instrument cable.
  • Feed the stripped end including the shield braid through the large black plastic insulator tube.
Please Log In to view prices
¼" Plug - Amphenol, Mono, Right Angle, Satin
1/4" Mono Phone plug, Right angle, Diecast Shell, Satin finish, Flexible grommet. Features:
  • Stylised Shell design
  • Robust diecast shell
  • Great solderability with increased solder area
  • Precision machined contacts
  • Flexible grommet cable protection
  • Quick and easy assembly
Please Log In to view prices
¼" Plug - Neutrik, Right-angle, nickel body, nickel contacts
1/4" professional right-angle phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
Please Log In to view prices
Speaker Twist Plug - Neutrik, speakON, 2-Pole, Strain Relief
2 pole cable connector, chuck type strain relief. Mates with W-SO-J21 The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination. Features:
  • Current rating 40 A continuous, 50 A audio signal with 50% duty cycle
  • Only 3 parts, easy to assemble
  • High impact materials – long-lasting and reliable
  • Easy and extremely precise locking system "Quick Lock"
  • 1 piece strain relief, chuck for 6 to 10 mm cable O.D.
  • Improved grip on latch
  • Mates with 4-pole chassis connector W-SO-J41 as well and makes contact with +1/-1
Please Log In to view prices
¼" Plug - Switchcraft, cable-mount, for thicker cables
Switchcraft 285L ¼” plug for large cables. The 285L features the same spec’s and build quality as the Switchcraft 280 but features a larger cable clamp and a .375" rear hole in the handle. These are great plugs for thicker wires such as speaker cables. Specifications:
  • Sleeve, Tip and Body: Nickel-plated copper alloy
  • Terminals: Solder lug - Tinned copper alloy
  • Handles: Shielded - machined Nickel-plated copper alloy
  • Tubular insulator inside handle
Please Log In to view prices
Power Jack - Lumberg, DC Panel Mount, Snap-in, 5.5mm External, 2.1mm Internal
Snap-in Lumberg panel mount barrel jack with solder lugs. This high quality jack is a similar size to the Lumberg low profile jack but easily snaps into place with no need to thread a nut inside the chassis. For use with barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter.
Please Log In to view prices
¼" Plug - Cliff, Stereo, Right Angle
Original Cliff UK right angle 1/4" stereo plug. High quality with plastic screw on cover having a 0.31" diameter hole for inserting cable and snap-on back plastic cover allowing ease of access to tip and ring solder lugs.
Please Log In to view prices
Jack Plate - 2-Hole, Metal, 4.02" x 4.41"
Colors Available:
Generic, 2 hole jack plate with smooth black finish, textured black finish, or zinc chrome finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting holes have a diameter of 0.43" and fit Cliff jacks with external threads perfectly (see S-H902). Multiple color options available. Center-To-Center mounting hole measurements are as follows:
  • Horizontal- 3-9/16”
  • Vertical- 3-3/16”
Please Log In to view prices
¼" Jack - Stereo, Switched Tip, for Peavey, Insulated
Peavey TRS jack with a switched tip connection. Stereo HID (High Definition), insulated, plastic bushing.
Please Log In to view prices
¼" Jack - Peavey, Stereo, Plastic Bushing
Stereo, insulated, plastic bushing, bushing length = 0.29". Please note that this does not include nuts or washers. Please see parts S-HRVNT, S-HRVLW, and R-VNUT-38 if you require them.
Please Log In to view prices
Jack Plate - 2-Hole, Metal, 3.5" x 5.13", Black
Generic, 2 hole jack plate with a smooth black finish or with a zinc chrome finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting holes have a diameter of 0.43" and fit Cliff jacks with external threads perfectly (see S-H902). Center-To-Center mounting hole measurements are as follows:
  • Horizontal- 3-9/16”
  • Vertical- 2-15/16”
Please Log In to view prices
¼" Jack - Cliff, PC Mount, switched, white
Cliff UK 1/4" white jack, switched. 4 PC mount terminals include: tip, tip-shunt, sleeve and sleeve-shunt. External threading: 7/16-20. Features:
  • Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
  • 'Kinked' legs for snap-in PCB mounting on PC-A and PC-C styles to facilitate pre-assembly and wave soldering
  • Tough, molded grade 1 white Nylon body.
  • Made in the U.K.
  • Supplied with a white nylon hexagonal mounting nut
  • Designed to receive both mono and stereo 1/4" jack plugs
  • Withstand Voltage: 2000VDC Min.
  • Maximum Current: 5A
  • Temperature Rating: -10°C ~ +70°C
  • Life (Minimum): 10,000+ Operations
  • Nominal Contact Resistance: < 50 mΩ
Please Log In to view prices
¼" Plug - Cliff, Mono, Right Angle
Original Cliff UK right angle 1/4" mono plug. High quality with plastic screw on cover having a 0.31" diameter hole for inserting cable and snap-on back plastic cover allowing ease of access to tip solder lug. This Cliff jack plug is designed for use in many applications including audio, computer, military and industrial uses. The tip, ring, sleeve (TRS) connectors are manufactured from solid nickel plated brass with high temperature phenolic / PBT insulators. Features a cable clamp, which is an integral part of the ground screen contact and clamps firmly without damaging the cable.
Please Log In to view prices
¼" Plug - Straight, Used with F-Cap on Fender amps
Fender style 1/4" straight mono (tip-sleeve) open plug. Perfect for use as "open" plug for Fender "Hot Rod" and "Blues Reissue" amps having both "Main Speaker" and "External Speaker" jacks allowing you to connect an alternate speaker impedance with the open plug inserted in the "Main Speaker" jack (speaker load configuration 3).
Please Log In to view prices
XLR Plug - Amphenol, female, thermoplastic, black
XLR 3 Pole female audio cable connector. Musician range. Black finish, silver contact plating. "Jaws" cable retention system.
Please Log In to view prices