Jacks & Plugs

Snap-in Lumberg panel mount barrel jack with solder lugs. This high quality jack is a similar size to the Lumberg low profile jack but easily snaps into place with no need to thread a nut inside the chassis. For use with barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter.

Cliff metal chassis mount XLR connectors. 3 pole, female, with stamped connectors. The Cliff range of professional, high quality XLR audio connectors can be used in numerous applications including professional and consumer audio, broadcast and industrial uses. These Cliff XLRs feature solder cups for wiring directly to the connector. For greater reliability, the female connectors have contact pins which provide a large surface area and self-clean upon plug insertion. Mounting hardware not included. Features

• The housing can be either front or rear mounted using the same panel cutout
• A leading first mate last break socket contact is standard on all female connectors (Pin 1)
• Solder cup
• Connectors are fitted with a grounding lug
• Compatible with all other XLR brands

Accepts standard banana plug, test and phone tip plugs, spade lugs, alligator clips, and bare wire. One plug per package. Gold plated. Multiple color options available.

Plastic jack cup for input jack on speaker cabinets.

• Diameter = 3 3/4''
• Center to Center Screw Hole Spacing Distance = 2 1/8''

Cliff metal chassis mount XLR connectors. 3 pole, male, with machined connectors. The Cliff range of professional, high quality XLR audio connectors can be used in numerous applications including professional and consumer audio, broadcast and industrial uses. These Cliff XLRs feature solder cups for wiring directly to the connector. Mounting hardware not included. Features

• The housing can be either front or rear mounted using the same panel cutout
• Machined connectors
• Solder cup
• Connectors are fitted with a grounding lug
• Compatible with all other XLR brands

Switchcraft XLR 3-Pin Cable Mount Plug (Type A3F) Nickel body. Silver contacts. Latchlock. The original A Series premium XLR connector with adjustable dual pressure plate cable clamp, flexible strain relief, and removable pin insert. Cable-mount with silver pins. Nickel. Provides secure cable lock and strain relief for all standard size cables. Specifications Construction Sturdy, die-cast zinc with satin nickel finish to withstand hard use - even abuse. Insert Insulation High-impact, molded thermoplastic provides high dielectric strength, and superior insulation resistance. Locking Latchlock on female plugs and receptacles locks into groove in mating male connector to prevent accidental disconnect.

Amphenol AC "Z" series XLR metal chassis mount connector. 3 pole male, D Flange, Stamped contacts, Black Finish. The metal chassis mount "Z" series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications are important. All AC products are manufactured to the highest quality standards and will withstand the harshest environments. Note: A ground tag is standard on all AC "Z" series connectors. Although the ground tag is intended for RFI shielding applications, Amphenol cannot guarantee its effectiveness in all cases.

1/4" stereo jack. 3 PC mount terminals include: tip, ring and sleeve. Metric threading: M12 x 1.0.

2 tip HID (High Definition), non-insulated, metal bushing. Please note that this does not include nuts or washers. Please see parts S-HRVNT S-HRVLW, and R-VNUT-38 if you require them.

Generic, 2 hole jack plate with smooth black finish, textured black finish, or zinc chrome finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting holes have a diameter of 0.43" and fit Cliff jacks with external threads perfectly (see S-H902). Multiple color options available. Center-To-Center mounting hole measurements are as follows:

• Horizontal- 3-9/16”
• Vertical- 3-3/16”

12 ½" mm, mono, non-insulated, rean, PC mount.

Genuine Marshall SKTP-00005 jack. This 5 pin jack is used as the send jack of the effects loop of some Marshall amps such as the JCM2000. Nut and washer are not included with this jack. The bushing is M12 x1.0 thread.
For return jack, see S-H562

3 pole horizontal 1/4" jack, all contacts switched, gold plated contacts, plastic housing with nut and washer

Generic plastic jack plate. Fits Les Paul and other guitars. Mount the guitar's output jack in the ⅜" hole in the center of the jack plate.

4 pole chassis connector, black D-size flange, countersunk thru holes, 3/16" flat tabs. Mates with W-SO-P42 The speakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The speakON receptacles are robust, versatile and easy to terminate. Features:

• Current rating 30 A rms
• Glass reinforced materials make it extremely robust and dependable
• Precise keyway for secure mating
• Accurate twist lock latching system
• Metal insert in locking area
• Airtight design - optimized for speaker applications

1/4" Mono Phone plug, Right angle, Diecast Shell, Satin finish, Flexible grommet. Features:

• Stylised Shell design
• Robust diecast shell
• Great solderability with increased solder area
• Precision machined contacts
• Flexible grommet cable protection
• Quick and easy assembly

Generic, 2 hole jack plate with a smooth black finish or with a zinc chrome finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting holes have a diameter of 0.43" and fit Cliff jacks with external threads perfectly (see S-H902). Center-To-Center mounting hole measurements are as follows:

• Horizontal- 3-9/16”
• Vertical- 2-15/16”

Cliff UK 1/4" white jack, switched. 4 PC mount terminals include: tip, tip-shunt, sleeve and sleeve-shunt. External threading: 7/16-20. Features:

• Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
• 'Kinked' legs for snap-in PCB mounting on PC-A and PC-C styles to facilitate pre-assembly and wave soldering
• Tough, molded grade 1 white Nylon body.
• Made in the U.K.
• Supplied with a white nylon hexagonal mounting nut
• Designed to receive both mono and stereo 1/4" jack plugs

• Withstand Voltage: 2000VDC Min.
• Maximum Current: 5A
• Temperature Rating: -10°C ~ +70°C
• Life (Minimum): 10,000+ Operations
• Nominal Contact Resistance: < 50 mΩ

Mates with standard dual binding posts with ¾" centers and can be staked for multiple connections. Polarity is indicated by rib. Gold plated screw connection.

R/A mono jack. Replacement for Fender amps 1999-present. Similar to Fender part: 005-1658-000

Original Fender® 3.5mm (1/8”) stereo phone jack . PC mount jack used as Auxiliary and headphone out for Mustang series amps.

R/A stereo jack. Replacement for Fender amps 1999-present. Similar to Fender part: 005-3450-000

Amphenol AX series XLR cable connector, 3 pole male, Machined gold-plated contacts, Black Finish The revolutionary AX series of XLR connectors introduce an exciting contemporary look and feel to the professional audio interconnect market. They are designed to complement modern audio architecture and truly “fit" within their environment.

Fender R/A 1/4" mono jack. Used 1999-present. Hex nuts not included (S-H510).