Jacks & Plugs

¼" Jack - Mono, replacement for Fender Amps 1999 - Present
R/A mono jack. Replacement for Fender amps 1999-present. Similar to Fender part: 005-1658-000
Please Log In to view prices
¼" Jack - Rean, horizontal, switched, PC mount
Horizontal 1/4" jack, all contacts switched, chrome ferrule nut
Please Log In to view prices
Jack Plate - Fits Les Paul, Plastic
Colors Available:
Generic plastic jack plate. Fits Les Paul and other guitars. Mount the guitar's output jack in the ⅜" hole in the center of the jack plate.
Please Log In to view prices
¼" Jack - Cliff, PC Mount, switched, white
Cliff UK 1/4" white jack, switched. 4 PC mount terminals include: tip, tip-shunt, sleeve and sleeve-shunt. External threading: 7/16-20. Features:
  • Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
  • 'Kinked' legs for snap-in PCB mounting on PC-A and PC-C styles to facilitate pre-assembly and wave soldering
  • Tough, molded grade 1 white Nylon body.
  • Made in the U.K.
  • Supplied with a white nylon hexagonal mounting nut
  • Designed to receive both mono and stereo 1/4" jack plugs
  • Withstand Voltage: 2000VDC Min.
  • Maximum Current: 5A
  • Temperature Rating: -10°C ~ +70°C
  • Life (Minimum): 10,000+ Operations
  • Nominal Contact Resistance: < 50 mΩ
Please Log In to view prices
Jack Plate - Marshall, Switchable Stereo / Mono
Switchable stereo/mono jack plate for back of cabinets.
Please Log In to view prices
¼" Jack - Fender®, Stereo, for Amps 1999-Present
Fender R/A 1/4" stereo jack. Used 1999-present. Hex nuts not included (S-H510), bushing length = 0.34".
Please Log In to view prices
Power Jack - DC Panel Mount, Vintage Boss Style, 5.5mm External, 2.1mm Internal
This DC power jack is similar to those used on vintage MIJ Boss pedals and others. This jack has a 2.1mm pin for use with 5.5mm barrel plugs. Three solder lugs are available for tip, ring, and switch.
Please Log In to view prices
¼" Plug - G&H, Mono, Jumbo, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in America. For large wire, 8-12 gauge speaker cable.
Please Log In to view prices
Banana Jack - Johnson Cinch, For 4mm Plugs, Panel Mount
Colors Available:
High quality banana jacks with tinned brass contacts and strong nylon housings. These jacks come in a wide variety of colors and work well with any 4mm banana plug. Cinch Johnson banana jacks are used in test equipment, audio equipment, as well as modular synthesizers such as DIY Buchla, Serge, and others. Features:
  • Formed brass contacts
  • Bright tin finish
  • Durable nylon 6/6 body
  • Nickel plated nut
  • 0.010Ω maximum contact resistance
  • Keyed mounting with two flatted sides
Please Log In to view prices
Jack Plate - Marshall, for Input Jack On Speaker Cabs, Plastic
Plastic jack cup for input jack on speaker cabinets.
  • Diameter = 3 3/4''
  • Center to Center Screw Hole Spacing Distance = 2 1/8''
Please Log In to view prices
¼" Jack - Mono, for Peavey, Insulated
2 tip HID (High Definition), insulated, plastic bushing. Please note that this does not include nuts or washers. Please see parts S-HRVNT, S-HRVLW, and R-VNUT-38 if you require them.
Please Log In to view prices
¼" Jack - Switchcraft, Mono, Open Circuit, Gold Plated
Genuine Switchcraft Type 11 ¼” jack with complete gold plating. All metal parts are gold plated including the washer and nut.
Please Log In to view prices
F-Cap - Plastic Cap for Straight Plug P-H55
F-cap, black plastic. Similar to that used on old Fender ® amps.
Please Log In to view prices
¼" Jack - Switchcraft, Mono, isolated break circuit
Switchcraft Type 13E phono jack. Mono 2-conductor isolated break circuit. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Includes nut and washer.
Please Log In to view prices
3.5mm Plug - Rean, cable mount, nickel-plated brass
High quality 3.5mm (1/8") plug. Features nickel plated brass contacts, with a nickel plated zinc shell. This plug uses a crimp strain relief for use with 4 mm O.D cables.
Please Log In to view prices
3.5mm Jack - Fender, Stereo, Phone, for Mustang
Original Fender® 3.5mm (1/8”) stereo phone jack . PC mount jack used as Auxiliary and headphone out for Mustang series amps.
Please Log In to view prices
¼" Jack - Pure Tone, Stereo, Double-Open Circuit, Long Thread
Pure Tone’s new long threaded three pole (stereo) 1/4" jack provides full contact for improved connections and signal integrity. This jack locks the cable securely into place creating a greater surface area connection to carry more signal for an improved frequency stability. This jack is a great choice for both mono and stereo applications as well as guitars using active electronics.
Please Log In to view prices
Banana Plug - Dual, Gold-Plated, Screw Type
Mates with standard dual binding posts with ¾" centers and can be staked for multiple connections. Polarity is indicated by rib. Gold plated screw connection.
Please Log In to view prices
¼" Jack - Dunlop, Stereo, for effects pedals
Stereo jack for Dunlop effects pedals. Original Dunlop replacement part. Though hole PCB mount with six pins.
Please Log In to view prices
¼" Jack - Fender®, Mono, for Amps 1999 to present
Fender R/A 1/4" mono jack. Used 1999-present. Hex nuts not included (S-H510).
Please Log In to view prices
¼" Jack - Stereo, replacement for Fender Amps 1999 - Present
R/A stereo jack. Replacement for Fender amps 1999-present. Similar to Fender part: 005-3450-000
Please Log In to view prices
¼" Jack - Lumberg, Low Profile, Stereo, Double Open Circuit
Low profile stereo jacks made by Lumberg. These high quality jacks are the perfect size for tightly packed pedal enclosures. The premium look, feel, and construction make Lumberg jacks an excellent choice for any build.
  • M9*0.75 Bushing Thread
  • Stereo 3-Conductor
  • Double Open Circuit (does not have switched terminal).
  • Includes nut and washer.
Please Log In to view prices
¼" Jack - Peavey, Stereo, insulated
Stereo HID (High Definition), insulated. Please note that this does not include nuts or washers. Please see parts S-HRVNT, S-HRVLW, and R-VNUT-38 if you require them.
Please Log In to view prices
¼" Plug - Cliff, Mono, Right Angle
Original Cliff UK right angle 1/4" mono plug. High quality with plastic screw on cover having a 0.31" diameter hole for inserting cable and snap-on back plastic cover allowing ease of access to tip solder lug. This Cliff jack plug is designed for use in many applications including audio, computer, military and industrial uses. The tip, ring, sleeve (TRS) connectors are manufactured from solid nickel plated brass with high temperature phenolic / PBT insulators. Features a cable clamp, which is an integral part of the ground screen contact and clamps firmly without damaging the cable.
Please Log In to view prices