Jacks & Plugs

Power Jack - DC PC Mount, 5.5mm External, 2.1mm Internal
This PCB mounted DC jack style can be found on many manufacturers’ pedals. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder pins are available for tip, ring, and switch.
Please Log In to view prices
Jack Plate - for Telecaster guitars
Colors Available:
Avoid loose output jacks with this jack mount for Telecaster guitars. Includes two angled screws that ensure that the jack will be held tightly in place. Multiple color options available.
  • Capable of being screwed directly onto switchcraft jacks
Please Log In to view prices
Jack Plate - Plug and Play, Mono / Stereo
The Plug and Play eliminates the confusing switch found on most stereo cabinets. Just pick your impedance and plug in. Label is set at the common 4/16 Ohm Mono and 8 Ohm Stereo. Ready to install with a steel dish, wires, and speaker connectors.
Please Log In to view prices
Ferrule - for Cliff UK Jacks, Chrome
Ferrule for internal thread jacks, chrome (3/8-20).
Please Log In to view prices
¼" Jack - Cliff, White, Solder Lug
Cliff UK 1/4" white jack. External threading: 7/16-20. Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability. Tough, molded Nylon body.
Please Log In to view prices
¼" Plug - G&H, Mono, Right Angle, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in the USA. 1/2" profile.
Please Log In to view prices
¼" Plug - G&H, Mono, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in the USA. 1/2 inch body diameter for instrument and smaller wire speaker applications. Features:
  • Shielded handle
  • Large cable clamp
  • Independent ground
  • Copper-core construction
Please Log In to view prices
Banana Plug - Screw Type, Gold Plated
Colors Available:
Internal stud for solder or solderless connection. Body is hex brass; tip is four leaved, phosphor bronze, gold plated spring. Gold spring type. Multiple color options available.
Please Log In to view prices
¼" Jack - Open Circuit, Made in Taiwan
¼" female. Open circuit. Replacement for Fender®. Made in Taiwan.
Please Log In to view prices
¼" Jack - Switchcraft, Mono, isolated make circuit
Switchcraft ¼" Mono 2-Conductor Input Jack, Isolated Make Circuit (Type 13). Includes nut and washer
Please Log In to view prices
¼" Jack - Stereo, PC Mount, Switched
1/4" stereo jack. 4 PC mount terminals include: tip, tip-shunt (normally closed), ring and sleeve. Metric threading: M12 x 1.0.
Please Log In to view prices
3.5mm Jack - Black Hardware, Eurorack, Mono, Switched Tip, PC Mount
Black PCB mounted 3.5mm mono jacks commonly found in DIY Eurorack projects. These jacks feature black hardware with a matching black nut. They also use a square bushing plate for added durability. Mounting nut is included.
Please Log In to view prices
¼" Jack - Stereo, PC Mount, Low Profile
PCB Mount stereo jacks with a very low profile. These jacks have a smaller footprint than the Lumberg jacks that are popular for tight pedal builds. They are perfect for top mounted jack pedal builds and any other project where space is limited. Mounting nut and flat washer included.
  • M9*0.75 Bushing Thread
  • Stereo 3-Conductor (TRS)
  • Open Circuit (does not have switched terminal).
  • Includes nut and washer.
Please Log In to view prices
¼" Jack - Pure Tone, Stereo, Double Open Circuit
Colors Available:
Pure Tone has developed a high quality 1/4" three pole (stereo) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs for both the tip connection, a spring for the ring, and an additional spring for the shield connection. These help to secure the plug into place and create a greater surface area connection at contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.
Please Log In to view prices
Power Jack - DC Panel Mount, Vintage Boss Style, 5.5mm External, 2.1mm Internal
This DC power jack is similar to those used on vintage MIJ Boss pedals and others. This jack has a 2.1mm pin for use with 5.5mm barrel plugs. Three solder lugs are available for tip, ring, and switch.
Please Log In to view prices
¼" Jack - Fender®, PC Mount, Mono
Original 4-pin Fender jack. Fits Fender amplifiers from 1988 - 1999. PC mount.
  • Direct replacement four-pin mono amplifier jack
  • Includes lock nut and washer
  • Fits Princeton® Chorus, Pro 185, BXR series, Stage™ 112SE, Ultimate Chorus™, Roc Pro™ Series, Performer series, Bronco™, '94 Twin®, Princeton 112+, Deluxe 112+, Automatic™ GT and Blues Junior™ amplifiers
Please Log In to view prices
RCA Jack - Chassis Mount, Rear Mount, Gold Plated
Colors Available:
Black/red/white band female chassis mount jacks. Sold individually, back panel mount.
Please Log In to view prices
Nut - Round, for mounting Qingpu PJ3410 3.5mm jacks
Knurled, slotted nut for W-QP-PJ3410 3.5mm jacks.
See W-QP-NUT-PJ-H for the hex version of this nut.
See S-TND-2X for nut driver tool
Please Log In to view prices
¼" Jack - Cliff, Mono, Switched, Gold
Mono input jack. 4 solder terminals, switched. Used in modern Marshall amps.
Please Log In to view prices
Power Jack - DC Panel Mount, Rear Mount, 5.5mm External, 2.1mm Internal
½" panel mount DC jack with solder lugs. This jack is rear mounted which makes troubleshooting and repairs simpler since the jack does not need to be desoldered if the circuit needs to be removed from the enclosure. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder lugs are available for tip, ring, and switch.
Please Log In to view prices
Jack Plate - Electrosocket, for Tele, chrome plated brass
This modern cupstyle Tele® jackplate is milled from brass and has a shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!
Please Log In to view prices
¼" Plug - Switchcraft, Mono, Cable-Mount, 1” Handle
The Switchcraft 380 ¼” two-conductor (mono) plug. The 380 has a shorter handle than standard ¼” plugs making it a great option when a lower profile is needed such as on pedalboards or use with rack equipment. Specifications
  • Sleeve, Tip and Body: Nickel-plated copper alloy.
  • Terminals: Solder lug - Tinned copper alloy.
  • Screw: Tin-plated (screws size 3-48).
  • Handles: Nickel-plated copper alloy. Tubular insulator inside handle.
Please Log In to view prices
¼" Jack - Cliff, Stereo, PC Mount, L-Leg
Cliff S4 PC-A (L Leg). Stereo input jack, metal nut, 6 pin pc mount. Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability Tough, molded grade 1 black Nylon body. Supplied with a black nylon hexagonal mounting nut. Designed to receive both mono and stereo ¼" jack plugs.
Please Log In to view prices
¼" Jack - Pure Tone, Stereo, Double-Open Circuit, Long Thread
Pure Tone’s new long threaded three pole (stereo) 1/4" jack provides full contact for improved connections and signal integrity. This jack locks the cable securely into place creating a greater surface area connection to carry more signal for an improved frequency stability. This jack is a great choice for both mono and stereo applications as well as guitars using active electronics.
Please Log In to view prices