Jacks & Plugs

Switchcraft 285L ¼” plug for large cables. The 285L features the same spec’s and build quality as the Switchcraft 280 but features a larger cable clamp and a .375" rear hole in the handle. These are great plugs for thicker wires such as speaker cables. Specifications:

• Sleeve, Tip and Body: Nickel-plated copper alloy
• Terminals: Solder lug - Tinned copper alloy
• Handles: Shielded - machined Nickel-plated copper alloy
• Tubular insulator inside handle

Switchcraft ¼" Mono 2-conductor cable-mount plug. Flat shielded handle with solder terminals. Type 228. Used in Fender amps for speaker connections. Also perfect for close quarters pedal-to-pedal connections. Includes hardware

1/4" professional right-angle phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

1/4" professional phone plug, gold contacts, black shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

2-pole 1/4" professional straight phone plug, gold contacts, black shell. Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.

Switchcraft ¼" Right Angle Plug (Type 226) Good for tight spaces Large terminals accept up to 16 AWG wiring (cables up to 0.25" diameter) All Metal exterior

Hex nuts for Rean jacks. Package of 12 Genuine Fender replacement jack nuts: 7/16-20 x 1/8 nickel-plated Used with many Fender amplifier jacks

Dual, gold plated binding post.

• Red and black posts
• Accepts either single or dual banana plugs
• Mounts in two ½" holes on ¾" centers, panel thickness up to ¼"
• 15A rating
• Gold plated contacts.

PCB mount Fender original mono jack. Closed circuit.

F-cap, black plastic. Similar to that used on old Fender ® amps.

1/4" Stereo Phone plug, Diecast Shell, Satin finish, Flexible grommet. Features:

• Stylised Shell design
• Robust diecast shell
• Great solderability with increased solder area
• Precision machined contacts
• Flexible grommet cable protection
• Quick and easy assembly

2 pole cable connector, chuck type strain relief. Mates with W-SO-J21 The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination. Features:

• Current rating 40 A continuous, 50 A audio signal with 50% duty cycle
• Only 3 parts, easy to assemble
• High impact materials – long-lasting and reliable
• Easy and extremely precise locking system "Quick Lock"
• 1 piece strain relief, chuck for 6 to 10 mm cable O.D.
• Improved grip on latch
• Mates with 4-pole chassis connector W-SO-J41 as well and makes contact with +1/-1

Heavy duty mil-spec barrel plug from Switchcraft. The S10 is a high current, non-sealed power jack with a similar design as the ¼” jacks from Switchcraft. The plug is rated for up to 11A of current.

Switchcraft 1/4" stereo jack, 4 solder lugs include: tip, tip-shunt, ring and sleeve.

Switchcraft XLR 3-Pin Cable Mount Plug (Type A3F) Nickel body. Silver contacts. Latchlock. The original A Series premium XLR connector with adjustable dual pressure plate cable clamp, flexible strain relief, and removable pin insert. Cable-mount with silver pins. Nickel. Provides secure cable lock and strain relief for all standard size cables. Specifications Construction Sturdy, die-cast zinc with satin nickel finish to withstand hard use - even abuse. Insert Insulation High-impact, molded thermoplastic provides high dielectric strength, and superior insulation resistance. Locking Latchlock on female plugs and receptacles locks into groove in mating male connector to prevent accidental disconnect.

Receptacle for panel or chassis mounting. Flange has two .136" (3.45 mm) diameter countersunk holes for #5-40 flat head mounting screws (not supplied). Mounts from front of panel or chassis in .953" (24.21 mm) diameter. Standard latchlock;

Amphenol AC "Z" series XLR metal chassis mount connector. 3 pole female, D Flange, machined, black finish. The metal chassis mount "Z" series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications are important. All AC products are manufactured to the highest quality standards and will withstand the harshest environments. Features

• The “D” size housing can be either front or rear mounted using the same panel cutout
• A leading first mate last break socket contact is standard on all female connectors (Pin 1)
• Solder cup
• Connectors are fitted with a grounding system for RFI shielding applications
• Compatible with all other XLR brands

Note: A ground tag is standard on all AC "Z" series connectors.

1/4" Mono Phone plug, Right angle, Diecast Shell, Satin finish, Flexible grommet. Features:

• Stylised Shell design
• Robust diecast shell
• Great solderability with increased solder area
• Precision machined contacts
• Flexible grommet cable protection
• Quick and easy assembly

Original 4-pin Fender jack. Fits Fender amplifiers from 1988 - 1999. PC mount.

• Direct replacement four-pin mono amplifier jack
• Includes lock nut and washer
• Fits Princeton® Chorus, Pro 185, BXR series, Stage™ 112SE, Ultimate Chorus™, Roc Pro™ Series, Performer series, Bronco™, '94 Twin®, Princeton 112+, Deluxe 112+, Automatic™ GT and Blues Junior™ amplifiers

XLR 3 pole female, stamped gold plated contacts, black finish. Features:

• Unique Australian designed shell and housing
• Ergonomic stylish sleeve design for improved grip
• Oversized latch lever preserves your thumb
• Leading first mate last break pin 1 on socket connectors
• Chuck style cable clamp to suit 3mm - 8mm (0.118" - 0.314") cable
• Overmolded cable support boot
• New socket contact design for improved contact resistance
• Precision machined pin contacts
• Compact 2.5mm (14AWG) solder buckets to reduce soldering time and

1/4" phone plug, jaws cable clamp, thermoplastic backshell. Features:

• Stylised Shell design with ergonomic grip
• Robust diecast keyed shell
• Great solderability with increased solder area
• Precision machined contacts
• "Jaws" cable retention system
• Quick and easy assembly
• Nickel-plated contacts

Plain dish to allow for drilling your own holes.

1/4" professional phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in the USA. 1/2" profile.