Jacks & Plugs
¼" Jack - Switchcraft, Stereo, double open circuit, deep panel
Type 152B. ¼" Female Stereo Input Jack 3-conductor. Thick panel-mount jack with cable clamp. Brass finish.
Jack Plate - for Telecaster guitarsAvoid loose output jacks with this jack mount for Telecaster guitars. Includes two angled screws that ensure that the jack will be held tightly in place. Multiple color options available.
- Capable of being screwed directly onto switchcraft jacks
¼" Jack - Rean, Mono, Open Circuit
2 pole open 1/4" jack, 2 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205" faston tabs
Power Jack - DC Panel Mount, Rear Mount, 5.5mm External, 2.1mm Internal
½" panel mount DC jack with solder lugs. This jack is rear mounted which makes troubleshooting and repairs simpler since the jack does not need to be desoldered if the circuit needs to be removed from the enclosure. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder lugs are available for tip, ring, and switch.
Nut - Cliff, Hex, Red, used on Loudspeaker Output Jacks
Red Cliff hex nut, often used on guitar amplifiers to identify loudspeaker outputs.
Binding Post - Dual, Gold-Plated, for banana plugs
Dual, gold plated binding post.
- Red and black posts
- Accepts either single or dual banana plugs
- Mounts in two ½" holes on ¾" centers, panel thickness up to ¼"
- 15A rating
- Gold plated contacts.
3.5mm Jack - Qingpu, Eurorack, TRS, Switched, Panel or PC Mount
3.5mm TRS jacks with a switched tip found in many DIY Eurorack projects. These Qingpu Electronics jacks can be panel mounted with wires or more commonly PCB mounted. The PJ3410 jacks can be used for both mono and stereo signals. Hardware sold separately. See accessory items below.
Power Jack - DC Panel Mount, Low Profile, 5.5mm External, 2.1mm Internal
Low profile DC jack with solder lugs. This jack is the perfect size for smaller builds where additional space is necessary. The low profile DC jack is also great for builds where aesthetics are a priority. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Features two solder lugs for tip and ring.
¼" Jack - Cliff, PC Mount, L-Leg
Input jack, 4 PC board terminals, switched, L-leg mounting. Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability.
Jack Plate - Plug and Play, Mono / Stereo
The Plug and Play eliminates the confusing switch found on most stereo cabinets. Just pick your impedance and plug in. Label is set at the common 4/16 Ohm Mono and 8 Ohm Stereo. Ready to install with a steel dish, wires, and speaker connectors.
¼" Jack - Cliff, Mono, PC Mount, L-leg, Tin
- Withstand voltage: 2000V DC Minimum
- Maximum current: 5A
- Temperature rating: -10°C - 70°C
- Life (minimum): 10,000+ operations
- Nominal contact resistance:
¼" Jack - Cliff, White, Solder Lug
Cliff UK 1/4" white jack. External threading: 7/16-20. Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability. Tough, molded Nylon body.
¼" Plug - G&H, Mono, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in the USA. 1/2 inch body diameter for instrument and smaller wire speaker applications. Features:
- Shielded handle
- Large cable clamp
- Independent ground
- Copper-core construction
¼" Jack - Switchcraft, Enclosed, Mono, Shunt Tip
The Switchcraft Type 112A enclosed ¼” jack is a high quality jack featuring a switched tip. This jack has three solder lugs. One for the tip, one for the sleeve, and one for the switch which connects to the tip when no plug is inserted. These jacks have been widely used across the industry and can also be found in many popular 5U synthesizers. Includes nut and washer
- Type 112AX
- 0.276" bushing length (standard)
- Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing.
- Mono 2-Conductor
- Includes nut and washer
- Tip is shunt
XLR Adapter - Amphenol, Male To Male, Nickel
XLR 3 pole male to 3 pole male adapter, pre-wired, metal shell. Nickel. Features:
- Adapter pre-wired for convenience
- 120 ohm terminators
3.5mm Jack - Qingpu, Eurorack, Stereo, PC Mount
PCB mounted 3.5mm stereo jacks commonly found in DIY Eurorack projects. These are the newest version from Qingpu Electronics featuring a square bushing plate for added durability. Hardware sold separately. See accessory items below.
Binding Post - PCB Type, Gold PlatedAccepts standard banana plug, test and phone tip plugs, spade lugs, alligator clips, and bare wire. One plug per package. Gold plated. Multiple color options available.
Banana Plug - Screw Type, Gold PlatedInternal stud for solder or solderless connection. Body is hex brass; tip is four leaved, phosphor bronze, gold plated spring. Gold spring type. Multiple color options available.
Power Jack - DC Panel Mount, 5.5mm External, 2.1mm Internal½" panel mount with solder lugs. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter.
RCA Plug - Blue, ceramic, gold plated connectorBlack or Red ring RCA phono jacks. Ceramic body with gold plating.
RCA Plug - Switchcraft, straight, 2-conductor, long handle
Switchcraft 2 conductor shielded RCA straight plug, solid pin, accommodates cable up to 0.290" (7.366mm) diameter, solder cup on center. Long handle & cable clamp, Nickel Handle, Nickel Plug
RCA Jack - Chassis Mount, Rear Mount, Gold PlatedBlack/red/white band female chassis mount jacks. Sold individually, back panel mount.
¼" Plug - G&H, Mono, Right Angle, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in the USA. 1/2" profile.