Hardware

Screw - 6-32 x ¼", Hammond, Self-Tapping, Combination Pan Head, Black
Black 6-32 self-tapping screw from Hammond with a ¼” thread length. These screws pair perfectly with their black powder coated sheet metal chassis boxes.
package of 6
Please Log In to view prices
Screw - Hammond, Phillips, Countersunk, 6-32 UNC
Colors Available:
Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.
package of 4
Please Log In to view prices
Clip Nut - for ~\frac{8}{32}~" thread, machine screws
Clip nut for 8/32" thread. For use with machine screws
package of 4
Please Log In to view prices
Screw - #8-32 x 3.25", for Chassis Straps
#8-32 x 3 ¼" chassis strap screw. Single piece.
Please Log In to view prices
Nut - 8-32, Keps with external tooth, zinc
Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
package of 10
Please Log In to view prices
Nut - Wide Dress Nut, Threaded Through, 15/32-32UNS
Wide dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a wide chamfered edge that pairs nicely with smaller dress nuts such as P-H54-DRESS-WIDE, P-H54-DRESS-THRU, and P-H54-NUT-DRESS. These nuts are threaded through and fit any 15/32-32UNS bushing such as Carling footswitches and full sized toggles.
Please Log In to view prices
Nut - Large Dress Nut, Carling, 15/32-32UNS
Colors Available:
Genuine Carling Technologies dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with some M12 bushings.
Please Log In to view prices
Lock Washer - Carling, Internal Tooth, for Toggle and Foot Switches
Nickel-plated internal tooth lock washers from Carling. These fit 15/32 and M12 bushing which are commonly used on full sized toggle switches and footswitches.
package of 5
Please Log In to view prices
Nut - Hex Nut, For Mini Toggle Switches
Hex nuts for use with mini toggle switches. These nickel plated dress nuts work on any 1/4-40 UNS threaded bushing. These are the same as the stock nuts included with Carling mini toggle switches.
package of 5
Please Log In to view prices
Washer - Internal Tooth Lock, ¼”, For Mini Toggle Switches
Spring steel tooth-lock washer. Uses internal teeth for locking and tension. The 0.25 inch size fits Carling mini toggle switches along with any other ¼” bushing item.
package of 5
Please Log In to view prices
Washer - Keyed Flat, For Mini Toggle Switches
Keyed washer for use with mini toggle switches. These nickel plated washers work on any 1/4-40 UNS threaded bushing with a vertical key slot. A small anti-rotation tab is on the outer edge of this flat washer. These are the same as the stock washers included with Carling mini toggle switches.
package of 5
Please Log In to view prices
Washer - CTS, Flat, for Potentiometers
Flat washer for 3/8" bushing. Perfect fit for CTS potentiometers. Package of 10.
package of 10
Please Log In to view prices
Nut - CTS, 3/8-32, Nickel, for 450 Series Potentiometers
Replacement nut for CTS 450 series potentiometers and others.
  • 3/8-32 threading
  • Sold individually
Please Log In to view prices
Nut & Washer - Panel, for ⅜" Potentiometers
Replacement nut and washer for pots with a ⅜" bushing diameter.
Please Log In to view prices
Nut & Washer - Panel, for ⅜" Potentiometers and Jacks
Replacement nut and washer for pots and jacks that feature a ⅜" bushing with 3/8-32 threading. Sold in packs containing 100 nuts and 100 washers.
package of 100
Please Log In to view prices
Spacers - Round, Aluminum, fits 4-40, 3/16” OD
Round spacers made of aluminum that fit 4-40 or M3 threaded screws. These non-threaded aluminum spacers visually match the PCB and turret board standoffs found in vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The outer diameter is 3/16”. These will also work well in many other types of projects. Pairs with S-HSB4-114 screws, S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.
Please Log In to view prices
Screw - 1", Flat top Phillips, Stainless Steel
1" stainless steel Phillips head, flat top screw.
package of 4
Please Log In to view prices
Screw - #6 x ¾", Pan Head, Stainless Steel
Stainless steel pan head Phillips self-tapping screws. #6 X ¾" length. Good for use with #'s 3,4 and 5.
package of 12
Please Log In to view prices
Screw - #6 x ¾", Flat Head, Stainless Steel
Stainless steel flat head Phillips self-tapping screws. #6 x 3/4" length. Good for use with P-H266 & P-H267 & P-H1087N.
package of 8
Please Log In to view prices
Screw - #4 x ½", Oval Head, Sheet Metal, Black Oxide
Black screws for attaching logos and other lightweight items. #4 x 1/2" sheet metal/wood screws, oval head, black oxide finish. Package of 25.
package of 25
Please Log In to view prices
Screw - #2 x ⅜, Phillips, Oval Head, SMS, Zinc
#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.
package of 25
Please Log In to view prices
Screw - 1", Phillips, Oval Head, Matching T-Nut
1" Oval head, Phillips screw with matching t-nut. (package of 4)
package of 4
Please Log In to view prices
Finishing Washer - #10, Stainless Steel, Countersunk
#10 steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. Made of 18-8 stainless steel.
package of 10
Please Log In to view prices
Nut - Hex, for Carling switches, ~\frac{15}{32}~"
Hex nut for Carling switches, 15/32". Sold individually.
Please Log In to view prices