Hardware

Bumper - Button, ~\frac{7}{16}~" Diameter x ~\frac{5}{16}~" High
Package of 4
Button bumpers help reduce unwanted vibrations on your equipment. (Package of 4). Overall Height = 5/8” Flange OD = 7/16” Flange Height = 5/16” Button OD = 5/16” Grommet Width = 3/64” Grommet Diameter = 1/4”
Please Log In to view prices
Clip Nut - for ~\frac{8}{32}~" thread, machine screws
Package of 4
Clip nut for 8/32" thread. For use with machine screws
Please Log In to view prices
Ferrule - for Cliff UK Jacks, Chrome
Ferrule for internal thread jacks, chrome (3/8-20).
Please Log In to view prices
Ferrules - Fender®, for American Strat / Telecaster, chrome
Package of 6
Fender® replacement string ferrules for American Series Strat® and Tele®.
Please Log In to view prices
Ferrules - Fender®, for Original Telecaster, nickel, set of 6
Package of 6
Fender® replacement string ferrules for Original Tele (6 ferrules)
Please Log In to view prices
Ferrules - Gotoh, for Guitar, Chrome
Package of 6
The Gotoh TLB-1 is a high quality set of guitar string ferrules. These press fit ferrules are a great choice for Telecaster® guitars or any guitar with a string through bridge. Includes six ferrules.
Please Log In to view prices
Please Log In to view prices
Finishing Washer - Blackface / Silverface, Nickel-plated Steel
Package of 10
Nickel-plated steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
Please Log In to view prices
Handle Stud - Bigsby, genuine replacement
Colors Available:
Genuine Bigsby® replacement handle stud.
Please Log In to view prices
Hardware - Fender, Screws & T-Nuts for Handle
Package of 5
Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
Please Log In to view prices
Heat Sink - For TO-220, Through Hole, Vertical Mount
Black extruded heatsink with radial fins for use with TO-220 and TO-202 transistor packages.
Please Log In to view prices
Hedlock Fastener - 4 Sets of 2 Clips
Package of 8
These super sturdy fasteners are great for speaker covers or helping prevent earthquake damage. 4 sets of 2 clips (package of 8).
Please Log In to view prices
Insulation - GC Electronics, fibroid, "fish paper"
Vulcanized Cellulose Fiber for all electrical insulation. Gray insulating paper. .010" thick. used in switches, under terminals, in transformers, etc .where mechanical strength is required. Its qualities of toughness, flexibility, and edge-tearing resistance combined with high dielectric strength and ready absorption of insulating varnish have led to its predominant use as an improved motor slot call insulation. Dielectric strength 3000 volts. 10" wide roll contains 240 sq. inches.
Please Log In to view prices
Lock Washer - Carling, Internal Tooth, for Toggle and Foot Switches
Package of 5
Nickel-plated internal tooth lock washers from Carling. These fit 15/32 and M12 bushing which are commonly used on full sized toggle switches and footswitches.
Please Log In to view prices
Locking Washer - Carling, for switches
Package of 5
Flat washer/locking ring. Fits switches that mount to 1/2" chassis holes. A 0.110" length guide tab ensures a locking fit (locking hole is 0.376" from chassis hole center).
Please Log In to view prices
Nut & Washer - for M7x0.75 Potentiometers
Replacement nut for Marshall style pots with 7mm bushing. Sold individually
Please Log In to view prices
Nut & Washer - Panel, for ⅜" Potentiometers
Replacement nut and washer for pots with a ⅜" bushing diameter.
Please Log In to view prices
Nut & Washer - Panel, for Fender / Marshall Jacks
Package of 5
M12 x1.0 threading. Nut and washer set for panel-mounting jacks.
Please Log In to view prices
Nut & Washer - Panel, for ⅜" Potentiometers and Jacks
Package of 100
Replacement nut and washer for pots and jacks that feature a ⅜" bushing with 3/8-32 threading. Sold in packs containing 100 nuts and 100 washers.
Please Log In to view prices
Nut - 8-32, Keps with external tooth, zinc
Package of 10
Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
Please Log In to view prices
Nut - Cage, Zinc, 10-24, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-24 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
Please Log In to view prices
Nut - Cage, Zinc, 10-32, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
Please Log In to view prices
Nut - Cage, Zinc, 8-32, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 8-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
Please Log In to view prices
Nut - Cliff, Hex, for ¼" white Jacks
Hex nut for white Cliff Jacks, threading: 7/16-20
Please Log In to view prices