Hardware

Nut - Fender, Hex Type, for Potentiometers
Hex nut for Fender® potentiometers. Package of 12.
package of 12
Please Log In to view prices
Rivets - Marshall Style, Gold, for Fastening
Gold rivets for fastening amplifier corners. For use on all Marshall and Marshall style corners and other rivet mounted cabinet hardware.
package of 4
Please Log In to view prices
Screw - 10-32, Phillips, Flat Head, Machine, stainless steel
Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.
package of 5
Please Log In to view prices
Spacers - Round, Nylon, #6-32, ⅜” Length
White nylon round spacers with a 0.375” length. These spacers fit #6 (M3.5) screws and have an outer diameter of 0.252”.
package of 5
Please Log In to view prices
Washers - Grover, Replacement For Tuner Knobs, Set
Full set of replacement washers for Grover tuners. These are the washers that are between the arm of the tuner and the tuner’s knob. All three washers are used on a single tuner. Includes 6 nylon washers, 6 spring washers, and 6 flat washers.
package of 6
Please Log In to view prices
Washer - Internal Tooth Lock, ¼”, For Mini Toggle Switches
Spring steel tooth-lock washer. Uses internal teeth for locking and tension. The 0.25 inch size fits Carling mini toggle switches along with any other ¼” bushing item.
package of 5
Please Log In to view prices
Finishing Washer - #4, Countersunk
#4 finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance.
package of 10
Please Log In to view prices
Nut - for Marshall, Hex Type, M9, for Potentiometers
Replacement nut for Marshall snap in style pots with M9 bushing.
package of 5
Please Log In to view prices
package of 6
Please Log In to view prices
Screw - #6 x 1”, Slotted, Oval Head, Wood, Nickel-plated
#6 x 1” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Fender® tweed amps to secure the back panels. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.
package of 4
Please Log In to view prices
Screw - Fender®, Pickup Mounting, for P-Bass & J-Bass
4 x 1.25, package of 12. For a variety of vintage and contemporary Precision and Jazz Bass models
package of 12
Please Log In to view prices
Nut - Fender®, Hex, for Rean Jacks
Hex nuts for Rean jacks. Package of 12 Genuine Fender replacement jack nuts: 7/16-20 x 1/8 nickel-plated Used with many Fender amplifier jacks
package of 12
Please Log In to view prices
Nut - Cliff, Hex, Plated Steel
Hexagonal, plated steel nut for Cliff UK jacks. This nut fits Cliff jacks with 7/16″ UNF, 20 TPI threading.
Please Log In to view prices
Screw - 6-32 x ¼", Hammond, Self-Tapping, Combination Pan Head, Black
Black 6-32 self-tapping screw from Hammond with a ¼” thread length. These screws pair perfectly with their black powder coated sheet metal chassis boxes.
package of 6
Please Log In to view prices
Screw - 6-32 x ⅝”, Phillips, Round Head, Machine, Nickel-plated
#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of round head screw matches the pickup and switch mounting screws found on Fender® guitars such as Stratocasters® and Telecasters®.
package of 5
Please Log In to view prices
Screw - #6, 1 ½", Self-Tapping, Phillips Pan Head, Zinc
#6 x 1 ½” zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
Please Log In to view prices
Ferrules - Fender®, for American Strat / Telecaster, chrome
Fender® replacement string ferrules for American Series and Mexican Stratocaster® and Telecaster®.
package of 6
Please Log In to view prices
Screws - Fender®, Set Screws, for Knobs
Set screws for knobs. Package of 24. Fits: U.S. Telecaster / P-Bass chrome knobs and vintage-style knobs. Fender part number: 099-4922-000
package of 24
Please Log In to view prices
Finishing Washer - #10, Stainless Steel, Countersunk
#10 steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. Made of 18-8 stainless steel.
package of 10
Please Log In to view prices
Washer - #8, Internal-External Tooth Lock, Steel
Steel lock washers that use both internal and external teeth for locking and tension. The teeth dig into the screw head or nut and the joint. These washers provide greater vibration resistance than split lock washers. Steel lock washers like these can be found in vintage Fender® blackface and silverface amplifiers for securing speakers to the cabinet. These washers have a zinc finish.
package of 10
Please Log In to view prices
Screw - #3 x ⅜”, Phillips, Round Head, Sheet Metal, Nickel-plated
#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used to secure Kluson and Kluson style tuners as well as string trees on Fender® guitars.
package of 7
Please Log In to view prices
Screw - M3, Nickel, Combination Head, Binding, 6mm
Combination Drive, Nickel, 6mm, M3 metric, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
package of 5
Please Log In to view prices
Screw - 8-32 x ½”, Phillips, Round Head, Machine, Brass
8-32 x ½” Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 8-32 x ½” size works in place of original M4.5 screws that were used for mounting the power and output transformers. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.
package of 5
Please Log In to view prices
Screw - 1", Flat top Phillips, Stainless Steel
1" stainless steel Phillips head, flat top screw.
package of 4
Please Log In to view prices