Hardware

Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Popular low-cost lock nut (also known as a Keps nut, k-lock, or washer nut) for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
package of 10
Please Log In to view prices
Locking Washer - Carling, for switches
Flat washer/locking ring. Fits switches that mount to 1/2" chassis holes. A 0.110" length guide tab ensures a locking fit (locking hole is 0.376" from chassis hole center).
package of 5
Please Log In to view prices
Washer - Internal Tooth Lock, spring steel
Spring steel tooth-lock washer. Uses internal teeth for locking and tension.
package of 5
Please Log In to view prices
Washer - Internal Tooth Lock, Steel, Black Oxide
Black oxide finished steel lock washers that use internal teeth for locking and tension. The internal teeth dig into the screw head or nut while the smooth outside edge won't snag objects. These washers provide greater vibration resistance than split lock washers. Black oxide lock washers like these can be found in vintage Marshall amplifiers. Pairs nicely with S-HSB4-X, S-HSB6-X, and S-HSB8-12 screws and S-HBNX nuts.
package of 5
Please Log In to view prices
Nut - Marshall, for 15/32-32 threading, Chrome
Chrome dress nut fits any standard 15/32-32 threaded bushing such as on Carling full-sized toggle switches and many footswitches. Intended for use on S-HM301 toggle switch. This style of nut is similar to slotted round nuts found on plexi Marshall amps.
  • Thread size = 15/32 - 32 thread pitch
    Please Log In to view prices
    Bracket - for PCB mounting, replica of Vintage Fuzz
    Mounting bracket for vintage fuzz PCBs. This bracket is an exact replica of the bracket found in the Italian made Vox Tone Bender V828 pedals. The mounting width for the board is 1.35” which fits the P-PC-FUZZ-JEN, P-PC-BEND-MKII-BRN, and any other vintage spacing (0.15”) stripboard. The PCB mounting holes are threaded for M3 screws (sold separately). The two potentiometer holes are spaced 1.95” center to center and fit potentiometers with ⅜” bushings or smaller.
    Please Log In to view prices
    Rivets - Marshall, Gold, for fastening
    Gold rivets for fastening amplifier corners. For use on all Marshalls.
    Please Log In to view prices
    Rivets - Marshall, Silver, for fastening
    Silver rivets for fastening amplifier corners. For use on all Marshalls.
    Please Log In to view prices
    Washer - Flat, M12, Nylon, for Foot Switches
    Colors Available:
    Nylon flat washers for use with foot switches. These washers are M12 size and fit both metric (M12) and imperial (15/32) bushings for compatibility with the vast majority of foot switches.
    package of 10
    Please Log In to view prices
    Washer - Flat, M3, Nylon, for Front Panels
    Colors Available:
    High quality nylon M3 flat washers. These durable washers fit perfectly on M3 threaded screws. The small outside diameter provides a clean look beneath the head of the screw. These are great mounting washers for preventing rack rash on front panels like Eurorack synths or any other use where the surface beneath the screw requires protection.
    package of 10
    Please Log In to view prices
    Finishing Nut - For ⅜” Jacks and Pots, ⅜”-32 UNEF-2A
    Colors Available:
    High quality plated ⅜” nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The ⅜”-32 UNEF-2A threading fits many ⅜” bushing parts such as Switchcraft ¼” jacks and CTS pots.
    package of 5
    Please Log In to view prices
    Washer - Flat, M6, Stainless Steel, Oversized
    Stainless steel M6 flat washers that are nearly identical to the chassis mounting washers used on many Marshall amps. These oversized M6 washers pair with 30mm M6 screws S-HSM6-1X30-SS to attach the amplifier chassis to the head cabinet. Fits any Marshall head that uses M6 screws. Also fits #12 imperial screws.
    package of 5
    Please Log In to view prices
    Screw - 6-32 x ⅝”, Phillips, Oval Head, Machine, Nickel-plated
    #6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of oval head screw matches the pickup and switch mounting screws found on Fender® guitars with countersunk holes on the pickguard.
    package of 5
    Please Log In to view prices
    Screw - #3 x ⅜”, Phillips, Oval Head, Wood, Nickel-plated
    #3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Gibson® pickguards, truss rod covers, and some humbucker rings.
    package of 5
    Please Log In to view prices
    Screw - #4 x ½”, Phillips, Oval Head, Sheet Metal, Nickel-plated
    #4 x ½” Phillips drive sheet metal screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® pickguards, tremolo covers, and some bridge covers.
    package of 5
    Please Log In to view prices
    Screw - #6, Phillips, Oval Head, Wood, Nickel-plated
    #6 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® tweed, blackface, and silverface combos and heads to secure the back panel. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on Telecaster® guitars.
    package of 4
    Please Log In to view prices
    Screw - #8, Phillips, Oval Head, Wood, Nickel-plated
    #8 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® blackface and silverface speaker cabinets to secure the back panel. They are also used to attach baffle boards on amps from this era. They are also the same type used for securing strap buttons as well as for mounting necks on Telecaster®, Stratocaster®, and other Fender® guitars.
    package of 4
    Please Log In to view prices
    Screw - 6-32 x ⅝”, Phillips, Round Head, Machine, Nickel-plated
    #6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of round head screw matches the pickup and switch mounting screws found on Fender® guitars such as Stratocasters® and Telecasters®.
    package of 5
    Please Log In to view prices
    Screw - #3 x ¼”, Phillips, Round Head, Wood, Nickel-plated
    #3 x ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Gibson® truss rod covers.
    package of 5
    Please Log In to view prices
    Screw - #3 x ⅜”, Phillips, Round Head, Sheet Metal, Nickel-plated
    #3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used to secure Kluson and Kluson style tuners as well as string trees on Fender® guitars.
    package of 7
    Please Log In to view prices
    Screw - #4 x 1 ¼”, Phillips, Round Head, Wood, Nickel-plated
    #4 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Fender® bass pickups, Telecaster® pickups mounted directly to the body, and some P90 pickups.
    package of 5
    Please Log In to view prices
    Screw - #6 x 1 ¼”, Phillips, Round Head, Wood, Nickel-plated
    #6 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on vintage style Fender® Stratocaster® bridges mounted directly to the body using six screws.
    package of 6
    Please Log In to view prices
    Screw - #6-32 x 1 ¼” Rosette Head, Machine, Bronze-plated
    #6-32 x 1-¼” machine screws made of bronze plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For an 8-32 rosette head screw, see S-HRS8-1116.
    package of 4
    Please Log In to view prices
    Screw - #8-32 x 1-1/16” Rosette Head, Machine, Brass-plated
    #8-32 x 1 1/16” machine screws made of brass plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For a 6-32 rosette head screw, see S-HRS6-114.
    package of 4
    Please Log In to view prices