Hardware

18-8 stainless steel sheet metal screws. These flat head #8 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for RCA reverb tank cables used in vintage Fender® blackface and silverface combo amps. For the larger #10 screws often used with power cables, see S-HFS10-34.

#8 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® blackface and silverface speaker cabinets to secure the back panel. They are also used to attach baffle boards on amps from this era. They are also the same type used for securing strap buttons as well as for mounting necks on Telecaster®, Stratocaster®, and other Fender® guitars.

Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.

#8-32 x 1 1/16” machine screws made of brass plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For a 6-32 rosette head screw, see S-HRS6-114.

#8-32 x 3 ¼" chassis strap screw. Single piece.

1" stainless steel Phillips head, flat top screw.

1" Oval head, Phillips screw with matching M4 threaded t-nut. (package of 4)

Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.

Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

4-40 Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 4-40 size works in place of original M3 screws that were used for the AC inlet, noval sockets, PCB and turret board standoffs, and the P-H1700 and S-HM100-A rotary selectors. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. Use with S-ASP4-X spacers for board standoffs. S-HBWX flat washers are also available.

Black 6-32 self-tapping screw from Hammond with a ¼” thread length. These screws pair perfectly with their black powder coated sheet metal chassis boxes.

#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of oval head screw matches the pickup and switch mounting screws found on Fender® guitars with countersunk holes on the pickguard.

#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of round head screw matches the pickup and switch mounting screws found on Fender® guitars such as Stratocasters® and Telecasters®.

#6-32 x ⅝” slotted drive machine screws made of nickel plated steel. This style of round head screw matches the pickup and switch mounting screws found on early Telecaster® guitars including the Nocaster® and Esquire® guitars.

Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

6-32 Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 6-32 size works in place of original M3.5 screws that were used for the rotary selector switches, octal sockets, capacitor clamps, and chokes. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.

8-32 x ½” Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 8-32 x ½” size works in place of original M4.5 screws that were used for mounting the power and output transformers. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.

High-quality 8/32 machine screws with #12 reverse wood screw threading at the head. These screws are a simple solution for mounting speakers to baffle boards and were commonly used on many vintage amplifiers. Nuts sold separately.

Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

Genuine Bigsby® mounting screws. These wood screws are for mounting bridge plates to the top of the guitar body. These are the stock screws included with plates like P-GB-PLATE.

Original Fender 6-32 screws for use on pickups and switches.

4 x 1.25, package of 12. For a variety of vintage and contemporary Precision and Jazz Bass models

Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.