Hardware

Original Fender 6-32 screws for use on pickups and switches.

Set of hex set screws used for saddle-height adjustment on American Vintage series Stratocaster and Telecaster bridges.

• Set of 12 hex set screws
• For American Vintage Stratocaster and Telecaster guitars
• Comes with four 4-40 x 3/8" hex screws and eight 4-40 x 5/16" hex screws.

Stainless steel pan head Phillips self-tapping screws. #6 X ¾" length. Good for use with #'s 3,4 and 5.

Lock washer for Fender® potentiometers. Package of 12.

Hex nut for Fender® potentiometers. Package of 12.

Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.

#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.

Stainless steel flat head Phillips self-tapping screws. #6 x 3/4" length. Good for use with P-H266 & P-H267 & P-H1087N.

Flat washer/locking ring. Fits switches that mount to 1/2" chassis holes. A 0.110" length guide tab ensures a locking fit (locking hole is 0.376" from chassis hole center).

Extra thick M12 flat washers. These washers fit both metric (M12) and imperial (15/32) bushings for compatibility with the vast majority of foot switches and full-sized toggle switches. These thick steel washers are a great way to add a classy look to projects.

Genuine Fender® vintage-style Strat bridge mounting screws. Some of Fender’s most requested replacement screws. Made for Fender® and used on a variety of vintage and contemporary models.

• Set of 12 replacement screws
• Genuine vintage specifications
• Nickel plating
• Phillips oval-head (#6 x 1 1/8")
• Used on American Vintage Stratocaster® guitars

Black extruded heatsink with radial fins for use with TO-220 and TO-202 transistor packages.

Nickel-plated internal tooth lock washers from Carling. These fit 15/32 and M12 bushing which are commonly used on full sized toggle switches and footswitches.

Uninsulated fork terminals for use with #8 studs. These terminals fit 22AWG through 16AWG wire gauges and feature a serrated barrel for a strong crimped connection. Made of tin plated copper.

Black screws for attaching logos and other lightweight items. #4 x 1/2" sheet metal/wood screws, oval head, black oxide finish. Package of 25.

#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of round head screw matches the pickup and switch mounting screws found on Fender® guitars such as Stratocasters® and Telecasters®.

Slotted dress nut for ⅜”-32 threaded bushing such as standard Switchcraft ¼” jacks and CTS potentiometers. These plated brass nuts add a sleek look to any amplifier, pedal or guitar. This style of nut has a similar look to slotted round nuts found on plexi Marshall amps.

Genuine Dunlop replacement housing screws for MXR/ Dunlop pedals. Replace lost screws and keep your battery access plate on tight. 6-32 thread, Phillips head.

#6-32 threading, package of 4. Comes in 1/2" or 3/4" length. For female standoffs, see S-H172X

8-32 x ½” Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 8-32 x ½” size works in place of original M4.5 screws that were used for mounting the power and output transformers. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.

Nylon flat washers for use with foot switches. These washers are M12 size and fit both metric (M12) and imperial (15/32) bushings for compatibility with the vast majority of foot switches.

Flush finishing washers made of nickel plated brass. Designed for accommodating the heads of countersunk screws. These washers provide additional bearing area on the material being fastened and can be used to give a neat, finished appearance. This design closely resembles the flush finishing washers found on earlier blackface Fender® amplifier cabinets. The #6 size is used for back panels on combo amps and heads. The #8 is used for extension cabinet back panels. For the later flanged style finishing washers used on these amps, see S-HXFW-2N.

Switchcraft shouldered hex nuts for ⅜”-32 UNEF-2A threaded bushings. These nuts include a rubber grommet for use in sealed systems and also add a unique look to any build such as pedals or amplifiers. The large nut (W-SC-DRESS-1) is intended for panel or chassis thicknesses of 0.05” through 0.09”. The small nut (W-SC-DRESS-2) is intended for panel or chassis thicknesses of 0.095” through 0.125”. Rubber grommet included.

White nylon round spacers with a 0.375” length. These spacers fit #6 (M3.5) screws and have an outer diameter of 0.252”.