Hardware

Threaded through dress nuts for use with mini toggle switches. Unlike the other versions of this dress nut, this nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.

High quality single row machine pin sockets made by Preci-Dip. These sockets are the break-away type and can easily snap into smaller sizes such as 5 separate transistor sockets.

Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

High quality plated ⅜” nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The ⅜”-32 UNEF-2A threading fits many ⅜” bushing parts such as Switchcraft ¼” jacks and CTS pots.

Red Cliff hex nut, often used on guitar amplifiers to identify loudspeaker outputs.

1" Oval head, Phillips screw with matching t-nut. (package of 4)

Replacement nut for CTS 450 series potentiometers and others.

• 3/8-32 threading
• Sold individually

Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.

#6-32 threading, package of 4. Comes in 1/2" or 3/4" length. For female standoffs, see S-H172X

Ferrule for internal thread jacks, chrome (3/8-20).

Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.

Hex nut for white Cliff Jacks, threading: 7/16-20. Also used on the footswitch jack in some Marshall amps.

Nickel-plated internal tooth lock washers from Carling. These fit 15/32 and M12 bushing which are commonly used on full sized toggle switches and footswitches.

Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.

• 10-32 Threading
• Panel Range .064-.105
• Zinc Finish
• Sold Individually

Larger threaded black Bananuts for mounting potentiometers or other hardware with M7 bushings. These nuts look great beneath smaller sized knobs.

Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.

Fiber Shoulder Washer Overall Outer Diameter = 0.625" Center Hole Diameter = 0.385" sold in packages of 5

Pick guard screws, phillips, ovalhead. Great for mounting countersunk pickguards, control plates, etc.

• 7/16” threaded portion
• Available in Black, Gold, Nickel, and Chrome plating
• Package of 100

Premium quality wool felt washers. Medium brown in color, these washers will resist wear and hold their shape over time. Center holes already punched. ¼" inside diameter. Listed diameter is outside diameter. Washer is 1/16" thick.

Steel, type A narrow. SAE washers have a tighter fit on the bolt and a smaller outside diameter. Designed for general purpose mechanical and structural use.

Flat washer/locking ring. Fits switches that mount to 1/2" chassis holes. A 0.110" length guide tab ensures a locking fit (locking hole is 0.376" from chassis hole center).

Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. Allows proper dial centering in cabinet opening. Overall dimensions 0.875" dia. x .233" thick.

Plated metal finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.

0.125" diameter nickel plated brass contact pin. Fits .062" and .093" boards. Height is .566" when mounted. In addition to turret board use, these pin connectors are often found on printed circuit boards. They are referred to as through hole terminal pins, header pins, or crimp contact pins.