Hardware

#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of round head screw matches the pickup and switch mounting screws found on Fender® guitars such as Stratocasters® and Telecasters®.

Pre-slotted black bone nuts for Gibson necks with a 12” radius. A 12” fingerboard is the common radius used on most Gibson guitars. The bone used for the pre-shaped and pre-slotted nuts is dyed black using a process that results in a fully black nut.

• Height - 9.3 mm
• Width - 43.4 mm
• Thickness - 4.8 mm
• Radius - 12 in.

Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 9.5” radius. A 9.5” fingerboard has been the standard Fender® neck radius since the 1980s. The bone used for the pre-shaped and pre-slotted nuts is dyed black using a process that results in a fully black nut.

• Height - 5.4 mm
• Width - 42.86 mm
• Thickness - 3.3 mm
• Radius - 9.5 in.

For a version of this nut with a 7.25” radius, see P-GTNN20.

Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 7.25” radius. A 7.25” fingerboard radius originated in the early 1950s and was used for most Fender® electric instruments until the 1980s.

• Height - 5.4 mm
• Width - 42.86 mm
• Thickness - 3.3 mm
• Radius - 7.25 in.

For a version of this nut with a 9.5” radius, see P-GTNN21.

#6 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® tweed, blackface, and silverface combos and heads to secure the back panel. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on Telecaster® guitars.

#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Gibson® pickguards, truss rod covers, and some humbucker rings.

#4 x ½” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Telecaster® pickguards including the Nocaster® and Esquire® guitars.

#8 x 1 ¾” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.

#8-32 x 1 1/16” machine screws made of brass plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For a 6-32 rosette head screw, see S-HRS6-114.

#6-32 x ⅝” slotted drive machine screws made of nickel plated steel. This style of round head screw matches the pickup and switch mounting screws found on early Telecaster® guitars including the Nocaster® and Esquire® guitars.

#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used to secure Kluson and Kluson style tuners as well as string trees on Fender® guitars.

#6 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on vintage style Fender® Stratocaster® bridges mounted directly to the body using six screws.

#8 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® blackface and silverface speaker cabinets to secure the back panel. They are also used to attach baffle boards on amps from this era. They are also the same type used for securing strap buttons as well as for mounting necks on Telecaster®, Stratocaster®, and other Fender® guitars.

#4 x ½” Phillips drive sheet metal screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® pickguards, tremolo covers, and some bridge covers.

#6 x 1” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Fender® tweed amps to secure the back panels. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.

#6-32 x 1-¼” machine screws made of bronze plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For an 8-32 rosette head screw, see S-HRS8-1116.

#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of oval head screw matches the pickup and switch mounting screws found on Fender® guitars with countersunk holes on the pickguard.

#3 x ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Gibson® truss rod covers.

#4 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Fender® bass pickups, Telecaster® pickups mounted directly to the body, and some P90 pickups.

Set of hex set screws used for saddle-height adjustment on American Vintage series Stratocaster and Telecaster bridges.

• Set of 12 hex set screws
• For American Vintage Stratocaster and Telecaster guitars
• Comes with four 4-40 x 3/8" hex screws and eight 4-40 x 5/16" hex screws.

#8 x 1.5” inch neck mounting screws. These neck mounting screws are chrome plated and are the standard screws used on many bolt-on neck guitars. Includes a full set of four Phillips screws.

Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

The Gotoh TLB-1 is a high quality set of guitar string ferrules. These press fit ferrules are a great choice for Telecaster® guitars or any guitar with a string through bridge. Includes six ferrules.

#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.