Hardware

Solder Lug - #6 or #8 Hole, Locking
Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10
package of 10
Please Log In to view prices
Screw - #8-32 x 3.25", for Chassis Straps
#8-32 x 3 ¼" chassis strap screw. Single piece.
Please Log In to view prices
Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Popular low-cost lock nut (also known as a Keps nut, k-lock, or washer nut) for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
package of 10
Please Log In to view prices
Washer - CTS, Flat, for Potentiometers
Flat washer for 3/8" bushing. Perfect fit for CTS potentiometers. Package of 10.
package of 10
Please Log In to view prices
Washer - Internal Tooth Lock, spring steel
Spring steel tooth-lock washer. Uses internal teeth for locking and tension.
package of 5
Please Log In to view prices
Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
package of 5
Please Log In to view prices
Washer - Switchcraft, S1029, shoulder for insulating panels
Switchcraft shoulder washer for 3/8” bushing. Perfect for insulating metal bushings from the chassis, use with W-SC-S1028. Minimum chassis hole diameter of 0.44” required to accommodate the shoulder.
Please Log In to view prices
Washer - Internal Tooth Lock, Steel, Black Oxide
Black oxide finished steel lock washers that use internal teeth for locking and tension. The internal teeth dig into the screw head or nut while the smooth outside edge won't snag objects. These washers provide greater vibration resistance than split lock washers. Black oxide lock washers like these can be found in vintage Marshall amplifiers. Pairs nicely with S-HSB4-X, S-HSB6-X, and S-HSB8-12 screws and S-HBNX nuts.
package of 5
Please Log In to view prices
Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
package of 5
Please Log In to view prices
Standoffs - #6-32, Female, Aluminum
#6-32 threading, package of 4. Comes in 1/2" or 3/4". For male to female standoffs, see S-H170X
package of 4
Please Log In to view prices
Washer - Switchcraft, S1028, flat for insulating panels
Switchcraft (brown) rigid plastic washer for 3/8” bushing. Perfect for insulating metal bushings from the chassis, use with W-SC-S1029.
Please Log In to view prices
Nut - 8-32, Keps with external tooth, zinc
Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
package of 10
Please Log In to view prices
Nut - CTS, 3/8-32, Nickel, for 450 Series Potentiometers
Replacement nut for CTS 450 series potentiometers and others.
  • 3/8-32 threading
  • Sold individually
Please Log In to view prices
Finishing Nut - For ⅜” Jacks and Pots, ⅜”-32 UNEF-2A
Colors Available:
High quality plated ⅜” nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The ⅜”-32 UNEF-2A threading fits many ⅜” bushing parts such as Switchcraft ¼” jacks and CTS pots.
package of 5
Please Log In to view prices
Nut - Large Dress Nut, Carling, 15/32-32UNS
Colors Available:
Genuine Carling Technologies dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with some M12 bushings.
Please Log In to view prices
Nut & Washer - Panel, for ⅜" Potentiometers
Replacement nut and washer for pots with a ⅜" bushing diameter.
Please Log In to view prices
Spacers - Round, Aluminum, fits 4-40, 3/16” OD
Round spacers made of aluminum that fit 4-40 or M3 threaded screws. These non-threaded aluminum spacers visually match the PCB and turret board standoffs found in vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The outer diameter is 3/16”. These will also work well in many other types of projects. Pairs with S-HSB4-114 screws, S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.
Please Log In to view prices
Screw - #6, Phillips, Oval Head, Wood, Nickel-plated
#6 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® tweed, blackface, and silverface combos and heads to secure the back panel. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on Telecaster® guitars.
package of 4
Please Log In to view prices
Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
package of 5
Please Log In to view prices
Lock Washer - Carling, Internal Tooth, for Toggle and Foot Switches
Nickel-plated internal tooth lock washers from Carling. These fit 15/32 and M12 bushing which are commonly used on full sized toggle switches and footswitches.
package of 5
Please Log In to view prices
Screw - 1", Phillips, Oval Head, Matching T-Nut
1" Oval head, Phillips screw with matching t-nut. (package of 4)
package of 4
Please Log In to view prices
Standoff - #6-32, Male-Female, Aluminum
#6-32 threading, package of 4. Comes in 1/2" or 3/4" length. For female standoffs, see S-H172X
package of 4
Please Log In to view prices
Finishing Washer - Blackface / Silverface, Plated Metal
Colors Available:
Plated metal finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found in many vintage blackface and silverface amplifiers and cabinets. This style is most typically used on front grill and baffle board mounting screws in these amps and cabinets. Fits with #8 countersunk screws.
package of 10
Please Log In to view prices
Nut - Hex finished, fine thread, zinc
Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
package of 5
Please Log In to view prices