Nut - Hex, for mounting Qingpu 3.5mm jacks
Hex nut for W-QP-419GR and W-QP-518MA 3.5mm jacks. See W-QP-NUT-K for the knurled, slotted version of this nut. See W-QP-WASHER for compatible washer
Nut - Knurled, for mounting Qingpu 3.5mm jacks
Knurled, slotted nut for W-QP-419GR and W-QP-518MA 3.5mm jacks. See W-QP-NUT-H for the hex version of this nut. See W-QP-WASHER for compatible washer See S-TND-2X for nut driver tool
Solder Lug - #6 or #8 Hole, Locking
Package of 10Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10
Screw - #8-32 x 3.25", for Chassis Straps
#8-32 x 3 ¼" chassis strap screw. Single piece.
Nut - Dress Nut, For Mini Toggle SwitchesDress nuts for use with mini toggle switches. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
Washer - Flat, for use on Qingpu Jacks
Flat washer for W-QP-419GR and W-QP-518MA 3.5mm jacks.
Wood Tack - Screw Nail, Steel, 20mm
Steel 20mm screw nails for corners, logos, badges, and more. These screw nails make adding cabinet accessories easy requiring only a mallet for installation. The design is great for speaker cabinets ensuring a better grip than standard nails and tacks under extreme vibrations.
Washer - Internal Tooth Lock, spring steel
Package of 5Spring steel tooth-lock washer. Uses internal teeth for locking and tension.
Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Package of 10Popular low-cost lock nut (also known as a Keps nut, k-lock, or washer nut) for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
Washer - CTS, Flat, for Potentiometers
Package of 10Flat washer for 3/8" bushing. Perfect fit for CTS potentiometers. Package of 10.
Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Package of 5Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Dress Nut - Befaco, Bananuts, for 3.5mm JacksBananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code: blue, purple, red, orange, yellow, white, green and black. These nuts are great for color-coding jacks or color-theming modules. Sold individually.
Nut - Cliff, Hex, for mounting ¼" Jacks
Nut - Hex, for Cliff UK Jacks S-H902, S-H903, S-H904, & S-H905
Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Package of 5Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Washer - Switchcraft, S1029, shoulder for insulating panels
Switchcraft shoulder washer for 3/8” bushing. Perfect for insulating metal bushings from the chassis, use with W-SC-S1028. Minimum chassis hole diameter of 0.44” required to accommodate the shoulder.
Screw - 8-32, #12 Reverse Thread, Speaker Baffle Mount
Package of 4High-quality 8/32 machine screws with #12 reverse wood screw threading at the head. These screws are a simple solution for mounting speakers to baffle boards and were commonly used on many vintage amplifiers. Nuts sold separately.
Nut - Marshall, for 15/32-32 threading, Chrome
Chrome dress nut fits any standard 15/32-32 threaded bushing such as on Carling full-sized toggle switches and many footswitches. Intended for use on S-HM301 toggle switch. This style of nut is similar to slotted round nuts found on plexi Marshall amps. T
- Thread size = 15/32 - 32 thread pitch
Standoffs - #6-32, Female, Aluminum
Package of 4#6-32 threading, package of 4. Comes in 1/2" or 3/4". For male to female standoffs, see S-H170X
Nut & Washer - Panel, for ⅜" Potentiometers
Replacement nut and washer for pots with a ⅜" bushing diameter.
Washer - Switchcraft, S1028, flat for insulating panels
Switchcraft (brown) rigid plastic washer for 3/8” bushing. Perfect for insulating metal bushings from the chassis, use with W-SC-S1029.
Nut - CTS, 3/8-32, Nickel, for 450 Series Potentiometers
Replacement nut for CTS 450 series potentiometers and others.
- 3/8-32 threading
- Sold individually
Nut - Large Dress Nut, Carling, 15/32-32UNSGenuine Carling Technologies dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with M12 bushings.
Finishing Nut - For ⅜” Jacks and Pots, ⅜”-32 UNEF-2AHigh quality plated ⅜” nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The ⅜”-32 UNEF-2A threading fits many ⅜” bushing parts such as Switchcraft ¼” jacks and CTS pots.
Package of 5