Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Bridge - Nashville Tune-O-Matic, Zinc, USA
Colors Available:
New!:
Made in U.S. modern-spec tune-o-matic bridge with no retaining wire. This bridge is fully plated and comes with pre-slotted saddles. Mounting hardware sold separately. For a full set with all hardware included, please see P-GKLU-KLP120XC. This Nashville bridge is a great upgrade that features wider intonation adjustments and a larger mass for better tone and sustain.
  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
  • For use with 4.95mm stud posts
Please Log In to view prices
Pickguard - For Tele, 5 Hole, Anodized Aluminum, Gold
Gold anodized aluminum Telecaster® style pickguard with 5 mounting holes. This pickguard has two pickup mounting holes for use with neck pickups that mount directly to the pickguard. All pickguard mounting holes are countersunk and the pickup mounting holes are flat.
Please Log In to view prices
Wire - Bus, 100 foot Spool, tinned copper
Solid tinned copper bus wire. 105°C temperature rating, 600V.
Please Log In to view prices
Pickguard - for '57 Strat®, 8 Hole, Single Ply
Colors Available:
New!:
Replacement pickguard for Fender® 1957 Strat® models. These single ply pickguards have eight mounting holes. Cut from a thicker single ply sheet, these pickguards offer a vintage style with added rigidity. Fits most American, Japanese, and Mexican '57 Stratocasters®.
Please Log In to view prices
Pickguard - Tele® style, 3-Ply, 8 Hole
Colors Available:
New!:
Three-ply Telecaster® style pickguards with 8 mounting holes. This pickguard has no pickup mounting holes for use with neck pickups that mount directly to the guitar’s body. All mounting holes are countersunk.
Please Log In to view prices
Pickguard - for Tele, 5 Hole, Single Ply
Colors Available:
New!:
Replacement pickguard for Telecaster guitars. These pickguards feature five mounting holes. Cut from a thicker single ply sheet, these pickguards offer a vintage style with added rigidity.
Please Log In to view prices
Backplate - For Gibson® Les Paul®
Colors Available:

Backplate cover for Gibson® Les Paul® electronics cavities. These covers are made of single-ply material with four mounting holes and a foil backing.

Please Log In to view prices
Pickguard Shield - For Strat®, 8 or 11 Hole
Aluminum hum shield for Stratocasters®. The humshield is mounted directly beneath the pickguard to help protect internal electronics from RF interference. This shield includes mounting holes that are compatible with 8 hole pickguards, ‘62 11 hole pickguards, and standard 11 hole pickguards.
Please Log In to view prices
Pickguard - for Hummingbird Acoustic
Hummingbird acoustic pickguard with adhesive backing. This tortoise color pickguard features the classic white and gold hummingbird graphic.
Please Log In to view prices
Tuners - Diagonal Mount, Schaller-style Knob, 6-in-a-line
Vintage style diagonal mount tuning machine set featuring a solid metal Schaller-style knob and are finished in chrome. These stamped tuners feature a classic diamond shaped back cover that can be removed for a more traditional look. The gear ratio is 15:1. All mounting hardware is included in this six in a line tuner set.
Please Log In to view prices
Pickguard - For '62 Strat®, 11 Hole, 3-Ply
Colors Available:
New!:
Replacement pickguard for Fender® '62 Strat® models. These pickguards have eleven mounting holes with one of the holes centered between the middle and neck pickups for compatibility with most American, Japanese, and Mexican '62 Stratocasters®.
Please Log In to view prices
Pickguard - Strat style, 3-Ply, 11 hole
Colors Available:
New!:
Stratocaster style 3 ply pickguard with 11 mounting holes. Top and bottom layers are the same with an alternate middle layer.
Please Log In to view prices
Pickguard - P-Bass, 3-Ply, 13 Hole
Colors Available:
New!:
Three-ply Precision Bass® style pickguards with 13 mounting holes. This pickguard is routed for a standard P-Bass style pickup and wiring configuration. The control cavity is backed with foil. All mounting holes are countersunk.
Please Log In to view prices
Pickguard - For Gibson® Les Paul®, Humbucker
Colors Available:
Pickguards for Gibson® Les Paul® guitars with two humbucker pickups. Mounting bracket is sold separately. See P-GKLU-KLP1731C. See dimensional drawing below for size details.
Please Log In to view prices
Switch Cover - For Gibson® Les Paul®
Colors Available:
Round back cover for Gibson® Les Paul® switch cavities. These switch covers are made of single-ply material with three mounting holes and a foil backing.
Please Log In to view prices
Pickguard - J-Bass, 3-Ply, 10 hole
Colors Available:
Three-ply Jazz Bass® style pickguards with 10 mounting holes. This pickguard is routed for a standard J-Bass style pickup and wiring configuration. All mounting holes are countersunk.
Please Log In to view prices
Bushings - Press Fit, Vintage Style Tuners, Nickel
High quality press fit bushings for vintage style tuners. These bushings are plated in nickel. Sold individually.
  • Inner Diameter: 0.240 in.
  • Outer Diameter: 0.355 in.
  • Height: 0.388 in.
Please Log In to view prices
Nut - Tusq XL, Pre-slotted, Strat and Tele Style, 7.25" Radius
The Graph Tech PQL-5072-00 is a perfect option for Fender guitars or re-issues from the 1950's-60's or 70's. This nut features a 7.25" radius, works with a curved or flat bottom and is permanently lubricated for great tuning stability. It works in both a flat bottom or curved bottom nut slot due to its ingenious design, just sand off the tab for a curved bottom. It is pre-slotted to make for a quick and easy install on just about all Fender electric guitars made in the 1950’s, 60’ and 70’s. The 7.25” fingerboard radius originated in the early 1950s and was used for most Fender electric instruments until the 1980s. In the 80's it was changed to a slightly flatter 9.5" radius. TUSQ XL is designed to boost guitar tone and performance. This precision engineered nut is made with a specially formulated material which couples the strings' vibrations to the neck and brings out the hidden harmonics and richness in every note.
Please Log In to view prices
Pickguard - For Tele, 8 Hole, Anodized Aluminum, Gold
Gold anodized aluminum Telecaster style pickguard with 8 mounting holes. This pickguard has two pickup mounting holes for use with neck pickups that mount directly to the pickguard. All pickguard mounting holes are countersunk and the pickup mounting holes are flat.
Please Log In to view prices
Pickguard - Strat® style, 11 hole, Anodized Aluminum, Gold
Colors Available:
Anodized aluminum Stratocaster® style pickguards with 11 mounting holes. These pickguards are cut for the classic Strat® configuration. All mounting holes are countersunk.
Please Log In to view prices
Pickguard - P-Bass, 13 hole, Anodized Aluminum, Gold
Gold anodized aluminum P-Bass style pickguard with 13 mounting holes. This pickguard is routed for a standard P-Bass style pickup and wiring configuration. All mounting holes are countersunk.
Please Log In to view prices
Washers - Grover, Replacement For Tuner Knobs, Set
Package of 6
Full set of replacement washers for Grover tuners. These are the washers that are between the arm of the tuner and the tuner’s knob. All three washers are used on a single tuner. Includes 6 nylon washers, 6 spring washers, and 6 flat washers.
Please Log In to view prices
End Buttons / Pins - Grover, for quick-release Strap locks
Package of 2
Colors Available:
Replacement End Pins for Grover Quick-Release strap locks. These extra end pins can be mounted on all guitars making it possible to use just one strap! Smooth, polished parts will not damage or mark up
Please Log In to view prices
Pickup - Kent Armstrong, Custom Series, Stealth 90, P-90
Single P-90 pickup with a nickel-plated metal cover. This new revolutionary design gives the sweet, warm chime and tone of the original P-90 pickup without all that annoying 60 cycle hum. Read the forums on this HP-90 pickup and don't let the high resistance fool you. Making its debut at the 2012 summer NAMM show, this design uses the hum-cancelling properties of opposing coils but defies the normal high output that would accompany similar resistance designs. Available in both bridge and neck positions so you can create a proper calibrated set and in black and cream plastic as well as real metal covers in black, chrome, gold and nickel plating! If you love P-90s and want to forget about not being able to use your favorite guitar because of lighting and power issues you simply have to get into a set of new Stealth 90 pickups. Recommended wiring includes using a 500K Ohm pot for volume, 250K Ohm pot for tone and a .022 capacitor as these are humbucking pickup designs.
Please Log In to view prices