Guitar Parts & Pickups

The Hipshot US Contour bridge is unlike any tremolo system out there. Hardened steel pivot pins inserted into a machined brass top plate give the US Contour a bell like tonal quality and silky smooth whammy action! Coupled with a solid machined steel tremolo block, the US Contour can achieve tremendous sustain and volume. Best of all, it is designed to retrofit any guitar using the American Standard tremolo routing convention. No additional routing required!

Features Include:

• Adjustable tension press in tremolo arm
• Stainless steel saddles
• High quality springs
• Chrome finished brass top plate

Genuine Fender USA vintage Stratocaster tremolo assembly. Features 'FENDER' stamped saddles

Gotoh 510TS Series Tremolos are machined with Chrome Molybdeumn Steel knife edges to withstand years of abuse and trouble free use. Comes stock with a vintage steel block with more mass and better tone. These are top of the line Gotoh tremolo units. Tremolo-unit includes the following accessories: Arm, Spring, Spring-holder, Wrench, Stud-bolt, Screw etc… Hardware included.

Genuine Fender synchronized bridge assembly for USA made Deluxe/ Ultra Stratocasters manufactured after 1986. This assembly is also used on the Elite series Stratocasters and an assortment of vintage-style and modern models. Also an upgrade for American Standard Stratocasters. Kit includes the following:

• 1 × Steel block
• 1 × Pop-in tremolo arm
• 6 × Block style saddles with offset intonation screws
• 2 × Pivot pins
• 2 × Pivot pin bushings
• 5 × Tremolo springs
• 1 × Tremolo claw
• 1 × String Tree

Fender part number: 007-7092-049

The Gotoh 510TS-FE1 tremolos are designed to withstand years of abuse and remain trouble free. This tremolo is precision machined and paired with steel saddles meant to last a lifetime. The patented FST tremolo block is designed to allow the strings to contact the saddle without touching the block as it passes through which increases sustain and tuning stability. The 510TS-FE1 also uses Gotoh’s patented Stud Lock system for increased mounting stability. Hardware included.

Tremolo bridge assembly for use on most American and American Standard series Stratocaster models manufactured from 1986-2007. Six powder-coated steel block saddles with off-center intonation screws, screw-in tremolo arm with white tip, mounting hardware and adjustment wrenches included. Features:

• Six powder-coated steel block saddles with off-center intonation screws
• Screw-in tremolo arm with white tip included
• Mounting hardware and adjustment wrenches included
• 2-7/32" (2.220") mounting and modern 2 1/16” (2.0625”) string spacing
• Used on American and American Standard series Stratocaster models (1986-2007)

The 7 string Hipshot Fixed Bridge is the ultimate marriage of performance, beauty and ergonomics. Each bridge base is hand polished before plating for a smooth, comfortable feel under your palm. The stainless steel saddles have a crisp string relief edge, eliminating dull tones and maximizing string vibration. The side walls lock your saddles in place no matter how hard you thrash.

If you are looking for a tremolo that is designed for enhanced sustain and better reliability, then you have found it. The VSVG Vintage tremolo features enlongated baseplate holes so the screws won't bind and it gives a very smooth, accurate return to pitch. With the string mounting holes being staggered in the steel block you will find much more tuning stability because of the more consistent string angle over the adjustable locking bent-steel saddles. Hardware included.

Gotoh 510T Series Tremolos are machined with Chrome Molybdeumn Steel knife edges to withstand years of abuse and trouble free use. The tremolo block is designed to allow the strings to contact the saddle without touching the block as it passes through which increases sustain and tuning stability. Hardware included.

A newly fashioned design from Gotoh® with almost no internal friction. Designed to directly retrofit the mounting hole pattern of a vintage tremolo. You can use this bridge to replace a conventional, Hardware included.

High quality tremolo featuring height-adjustable saddles that lock to a hardened steel baseplate. Threaded studs and bushings, springs, spring holder, allen wrenches and adjustable-tension arm are included. Looking for a great tremolo system for better tuning stability, string energy transfer and note sustain? Then you have found it right here. Hardware included.

A tremolo-unit includes the following accessories. Arm, spring, spring-holder, wrench, stud-bolt, screws. U.S.A. threads screws. String spacing:

• 56mm from low E string to high E string
• 11.2mm between each string

The ResoMax 4mm bridge is made from Graphtech’s ResoMax alloy. ResoMax is lightweight, high strength, and full of harmonics that will leave your guitar dripping with tone. It comes preloaded with String Saver saddles to reduce string breakage and improve tuning stability. All ResoMax bridges feature Graphtech’s patented magnetic lock to the steel posts that come with it. 4mm posts are used in a lot of American and European-built guitars, and brands such as Gibson, Godin, and Duesenberg. Please see the measurement guide to verify compatibility. The ResoMax NV2 is loaded with Graphtech’s Patented String Saver Saddles. These saddles are impregnated with PTFE and will dramatically reduce string breakage and improve tuning performance.

The ResoMax 6mm bridge is made from Graphtech’s ResoMax alloy. ResoMax is lightweight, high strength, and full of harmonics that will leave your guitar dripping with tone. It comes preloaded with String Saver saddles to reduce string breakage and improve tuning stability. All ResoMax bridges feature Graphtech’s patented magnetic lock to the steel posts that come with it. This is a great option to upgrade or replace the existing bridge on your Epiphone, ESP, LTD, BC Rich, Carvin, Schecter as well as many other import guitars. Please see the measurement guide to verify compatibility. The ResoMax NV2 is loaded with Graphtech’s Patented String Saver Saddles. These saddles are impregnated with PTFE and will dramatically reduce string breakage and improve tuning performance.

At first blush, the KickAss™ might seem like a simple, heartfelt tribute to Leo Quan’s BadAss II®. A closer look, however, reveals significant improvements under the hood that put this bridge in a class of its own. Hipshot worked hard to ensure that the KickAss™ possesses the soul of the beloved original without being a knockoff.

A modern version of the Tune-o-matic style bridge for guitars. Pre-notched titanium saddles with an individual saddle intonation screw retained by mini hex nuts for each saddle. Threaded thumbwheel style studs and anchor bushings. Hardware included.

A modern version of the Tune-o-matic style bridge for guitars. Pre-notched titanium saddles with an individual saddle intonation screw retained by mini hex nuts for each saddle. Standard mounting post style. Hardware included.

Gotoh's unique grooving on the “In-Tune” saddles results in more exact intonation compared to traditional vintage-style saddles. Each saddle is reversible and can be used in any position. Titanium construction is used for rich harmonic overtones and long sustain. The brass saddles create a bright sound. 10.8mm string spacing

Original Fender® modern six-saddle bridge assembly for use on American, American Deluxe and American Standard series Telecaster guitars manufactured from 1986-2007. Includes string-through-body plate, six American series bridge saddles with offset intonation screws, mounting hardware and adjustment wrenches.

Designed to for use with the Telecaster® single coil pickup; this heavier brass bridge plate features six allen-adjustable brass saddles. Strings mount through the guitar body and all of the mounting screws are included. Hardware included.

Direct replacement for most Fender 5 String P-Bass and Jazz Bass guitars. Superior high quality and precision made. This is for those who demand only the best for their Bass without breaking the bank. Mounting screws included. Hardware included.

Genuine Bigsby® Sorkin bridge assembly for use with Bigsby vibrato units. The Sorkin bridge is also known as the bowtie bridge.
2 13/16” stud spacing.

Stud Mount Adjustable Bridge, Hardware, 2-1/16" String, 3-¼" Stud. Hardware included.

Original Fender® vintage-style six-saddle bridge assembly for use on American Vintage series and Deluxe Nashville Telecaster guitars. Includes string-through-body plate, six nickel-plated "barrel" saddles, mounting hardware and adjustment wrenches.