Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
package of 6
Please Log In to view prices
Fret Wire - 18% Nickel-Silver, 2 ft lengths, Small sizes
High quality 18% Nickel-Silver fret wire in small sizes.
  • 2mm - 2.1mm Crown Widths, (0.079" - 0.083")
  • 0.9mm - 1.3mm Crown Heights, (0.035" - 0.051")

Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-S-1 38 PRICE P-GTFW-S-2 31 PRICE P-GTFW-S-3 32 PRICE P-GTFW-S-4 26 PRICE P-GTFW-S-5 35 PRICE For additional sizes and options please see:
  • Medium Sizes - P-GTFW-M-X
  • Jumbo Sizes - P-GTFW-J-X
  • Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-S-1 2.0 mm (0.079") 0.9 mm (0.035") 2.5 mm (0.098") 0.5 mm (0.020") 0.83 mm (0.033")
Please Log In to view prices
Guitar strings - Fender, Electric, Original 150s
If you're trying to capture the original vintage tone of pure nickel wound strings; string up a set of Original 150s! Deliver a smooth feel with reduced finger noise. Rich, warm tone with abundant harmonics. Perfect for blues, jazz and classic rock. They're pure Fender tone through and through. Made in the USA. Pure Nickel Wound Gauge Sets: .010 - .046 contains .010, .013, .017, .026, .036, .046 .009 - .042 contains .009, .011, .016, .024, .032, .042 .011 - .049 contains .011, .014, .018, .028, .038, .049
package of 6
Please Log In to view prices
Knob Cap - Fender, S-1 Switch, Strat
Colors Available:
Genuine Fender replacement knob cap for S-1 switch, which can be retrofitted to nearly any U.S.- and Mexico-made Stratocaster manufactured from 1954-present.
Direct Replacement for P-K358X
Please Log In to view prices
Cover - Fender®, for Vintage P-Bass, Chrome
Original Fender® pickup cover for vintage P-Bass, chrome.
Features:
  • True vintage specifications
  • Fits American Vintage, Road Worn and Classic Series basses
  • Will not fit five-string basses
  • Mounting hardware not included
Please Log In to view prices
package of 6
Please Log In to view prices
Washers - Grover, Replacement For Tuner Knobs, Set
Full set of replacement washers for Grover tuners. These are the washers that are between the arm of the tuner and the tuner’s knob. All three washers are used on a single tuner. Includes 6 nylon washers, 6 spring washers, and 6 flat washers.
package of 6
Please Log In to view prices
Screw - 10-32, Phillips, Flat Head, Machine, stainless steel
Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.
package of 5
Please Log In to view prices
Tuners - Grover, Rotomatic, 3 per side, 14:1, Keystone knob
Colors Available:
These guitar machines are a triumph in engineering and styling. The housing provides a maximum bearing for worm, gear and string post. Gear ratio is 14:1. Worm and gear are precision-cut for perfect meshing. This eliminates backlash and slippage. Countersunk tension screw permits player to regulate turning tension to any degree. Gear box has a special lubricant for lifetime, trouble-free service. Includes ⅝" washers, bushings and wood screws.
package of 6
Please Log In to view prices
Tuners - Grover, Sta-Tite, 3 per side vertical
Colors Available:
The same excellent features as the original 97 series, now with an 18:1 gear ratio!
package of 6
Please Log In to view prices
Fret wire - Fender®, pre-cut, for vintage guitar
Fender® replacement pre-cut vintage fret wire. Pre-radiused to 7.25"
Features:
24 vintage-style pre-cut frets for guitar fingerboards
Pre-radiused to 7.25"
Each piece .039" tall and .084 wide
package of 24
Please Log In to view prices
Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Radiused
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm with radiused bottom.
Please Log In to view prices
Pickguard - Fender®, for American Stratocaster, 11-hole
Colors Available:
Fits most American and Mexican stratocasters. 3 ply standard 11 hole pickguard. Fits 3 single coil pickukps.
Please Log In to view prices
Fret wire - Fender®, pre-cut, for Standard Guitar
Fender® replacement pre-cut standard fret wire (24 pieces). Pre-radiused to 9.5"
Features:
  • 24 pre-cut standard frets for guitar fingerboards
  • Pre-radiused to 9.5"
  • Each piece .046" tall and .103 wide
package of 24
Please Log In to view prices
Nut - Bone, for Gibson, 43mm X 5.9mm X 8mm, Flat
Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.
Please Log In to view prices
Thumbwheel - ABR-1 Style, Plated Steel, USA
Colors Available:
U.S. made vintage style ABR-1 thumbwheels. These steel thumbwheels feature high quality plating and are tapped for 6-32 threaded posts.
package of 2
Please Log In to view prices
Tremolo arm tip - Fender®, for capping tremolo arms
Colors Available:
Get better leverage and grip on your whammy bar by replacing the plastic tip, package of two. 10-32 thread size.
package of 2
Please Log In to view prices
Neck Plate - Fender®, 4 Bolt, chrome
Original Fender® vintage-style neck plate for use on most U.S. and Mexico-made Fender guitars and basses using four-screw neck mounting without Micro-Tilt™ adjustment. Mounting screws included.
Please Log In to view prices
Pickguard - for Standard Strat®, 11 Hole, 3-Ply
Colors Available:
Replacement pickguard for Fender® Standard Stratocaster models. These pickguards have eleven mounting holes and are cut for the classic strat configuration. Fits most American and Mexican Standard Stratocasters®. Features:
  • 3-ply / 2.5mm thickness
  • 11 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
  • Various colors available
Please Log In to view prices
Strap Buttons / Pins - Gotoh, EP-A1 Relic, Aged, set of 2
The Gotoh "Relic" series is purposefully designed to give an "aged" or "vintage" look to your guitar. 2 pieces per set, screws included.
package of 2
Please Log In to view prices
Tuners - Kluson, 3 per side, with pearloid keystone
Colors Available:
Kluson Pearloid Button Tuners, 3 Per Side, Pearl. Complete set with both bass and treble side individual tuning machines. Includes bushings and mounting screws. Historically correct replacement for many '50s and '60s Gibson®, Martin® and Epiphone® guitars. Used on a Les Paul / SG Standard Historically used on:
  • 1958 - 1959 Gibson® Flying V
  • 1958 - 1959 Gibson® ES-345
  • 1956 - 1959 Gibson® ES-295
  • 1956 - 1959 Gibson® J-200
  • 1956 - 1959 Gibson® ES-350
  • 1956 - 1959 ES-5
  • 1957 Gibson Explorer Prototype Futura
  • 1959 Epiphone Crestwood Deluxe
package of 6
Please Log In to view prices
Jack Plate - Fender®, for Stratocaster, chrome
Original Fender® jack plate for Stratocaster. Used on nearly every Stratocaster manufactured from 1954 to present. Includes screws.
Please Log In to view prices
Bridge Cover - Fender®, for Vintage P-Bass, Chrome
Original Fender® bridge cover for vintage P-Bass. Keep your P Bass as vintage-accurate as possible with this period-correct bridge cover for vintage Fender® bridge assemblies. This bridge cover is sure to impart traditional Fender looks and evoke the early tones of Fender with complete precision.
Features:
  • Genuine vintage specifications
  • Fits American Vintage, Road Worn and Classic Series basses
  • Will not fit five-string basses
  • Mounting hardware not included
Please Log In to view prices
Tuners - Gotoh, SD90, Vintage Keystone-style, 3-per-side
Colors Available:
Machine heads without a sealed gear are criticized for not having the same smooth performance, efficiency and durability that sealed gear tuners have. The SD series solves these problems by combining "Rock-solid" technology and the post collar or: "Self-Center Guide", found on enclosed gears in the base plate of the gear allowing the post to perfectly align itself with the bushing which attaches the gear to the headstock. The SD series uses a torque balancer to ensure steady rotation of the tuner button giving high quality sound performance as well as great functionality. Through its use of the ideal materials selected for each component part you also obtain a far superior sound. Mounting hardware included.
package of 6
Please Log In to view prices