Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Screws - Original Fender, Vintage Style Strat Bridge Mounting
Package of 12
Genuine Fender® vintage-style Strat bridge mounting screws. Some of Fender’s most requested replacement screws. Made for Fender® and used on a variety of vintage and contemporary models.
  • Set of 12 replacement screws
  • Genuine vintage specifications
  • Nickel plating
  • Phillips oval-head (6-32 x 7/16")
  • Used on American Vintage Stratocaster® guitars
Please Log In to view prices
String guides - Fender®, for Telecaster
Fender® Telecaster string guide
String guides are also known as string trees or string retainers.
Please Log In to view prices
Screws - Fender®, Saddle Height Screws
Package of 12
Set of hex set screws used for saddle-height adjustment on American Vintage series Stratocaster and Telecaster bridges.
  • Set of 12 hex set screws
  • For American Vintage Stratocaster and Telecaster guitars
  • Comes with four 4-40 x 3/8" hex screws and eight 4-40 x 5/16" hex screws.
Please Log In to view prices
Knob - Dunlop, Large Aluminum MXR, Push-On
Genuine Dunlop / MXR large aluminum knob for use with T18 knurled pot shafts. This rugged aluminum knob features a white indicator line and a diamond cut knurl for grip when using it. This high end knob looks great on pedals, amplifiers, and other projects.
Please Log In to view prices
Neck Plate - Gotoh, Relic, Aged Chrome
A traditional steel neck mounting plate for guitar or bass. Screws included.
For matching aged hardware, please check out the rest of the Gotoh Relic series:
  • Dome Knobs - P-GGT-90
  • Tele Bridge - P-GGT-85
  • String Ferrules - P-GGT-87
  • 6-in-a-line Tuners - P-GGT-81
  • Strap Buttons - P-GGT-86-AC
  • String Trees - P-GGT-92
  • Control Plate - P-GGT-91
Please Log In to view prices
Pickup Kit - Single Coil for Strat, White Cover
Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.
Please Log In to view prices
Tremolo Springs - Fender®, Tension, Package of 5
Package of 5
Set of five Stratocaster® tremolo tension springs for use on American Vintage series and Custom Shop instruments.
  • Set of five nickel-plated steel tremolo tension springs
  • For American Vintage series and Custom Shop instruments
Please Log In to view prices
Tuner Knob - Kluson, Pearloid Keystone Double Ring, for tuners
Double ring. Replacement color-correct Keystone (tulip) press-on button for Kluson® tuning machines. Correct for vintage applications. Sold individually. See P-GKLU-SLN for single ring.
Please Log In to view prices
Tuners - Gotoh, Relic, SD91, oval knob, 6-in-a-line, aged nickel
Package of 6
1:15 gear ratio. Hardware included.
Please Log In to view prices
Keeper Bar - 10 Hole, 49.2mm, Raw Steel, USA
Original, made in USA, 10-hole keeper bar for 49.2mm spacing. This P.A.F. correct keeper bar is great for humbucker and P-90 pickups. Made of raw steel.
Please Log In to view prices
Tuners - Gotoh, Vintage Oval Knob, 3-per-side
Package of 6
Colors Available:
Machine heads without a sealed gear are criticized for not having the same smooth performance, efficiency and durability that sealed gear tuners have. The SD series solves these problems by combining "Rock-solid" technology and the post collar or: "Self-Center Guide", found on enclosed gears in the base plate of the gear allowing the post to perfectly align itself with the bushing which attaches the gear to the headstock. The SD series uses a torque balancer to ensure steady rotation of the tuner button giving high quality sound performance as well as great functionality. Through its use of the ideal materials selected for each component part you also obtain a far superior sound. These are 3+3 (Three on a side) configuration. Mounting hardware included. 1:15 gear ratio.
Please Log In to view prices
Tuners - Kluson, 6 in line, Traditional with oval knob
Package of 6
Colors Available:
This Kluson® 6-in-line tuning machine set has oval metal (butter bean-shaped) buttons and the improved 15:1 gear ratio for more stable and accurate tuning. The housing and button style are period correct for 1965 - 1969 production dates. These feature the Kluson® Safety Post. This set comes complete with 6 bass side tuners, 8.8mm O.D. vintage bushings with 1/4 inch inner diameter and mounting screws needed for installation.
Please Log In to view prices
Nut - Graphite, for Gibson, slotted
This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size. PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 23/32 inches (43.75mm)
  • Height #1 (fretboard side) = 5/16 inches (7.81mm)
  • Height #2 (headstock side) = 9/32 inches (7mm)
  • Thickness at bottom = 15/64 inches (6.1mm)
  • Thickness at top = 3/16 inches (4.78mm)
Please Log In to view prices
Knob - Fender®, Black J-Bass, Set Screw
Package of 3
Original Fender® Jazz Bass knob set, black, package of 3.
Please Log In to view prices
Screw - Bigsby, Regular #125, Hinge
Colors Available:
Genuine Bigsby® mounting screws. These are the same screws that come stock with many Bigsby® vibrato units. These wood screws are for mounting the hinge to the edge of the guitar body.
Please Log In to view prices
Tremolo arm tip - Fender®, for capping tremolo arms
Package of 2
Colors Available:
Get better leverage and grip on your whammy bar by replacing the plastic tip, package of two.
Please Log In to view prices
Nut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
Please Log In to view prices
Please Log In to view prices
Pickup Part - 7-String Base Plate, Nickel
Stamped nickel baseplate for building or repairing a 7 string pickup.
  • 61.2mm/2.40” spacing(outer holes center to center)
  • 88.9mm/3.50”mounting screw hole spacing (center to center)
  • .03” stamped nickel construction
  • Sold individually
Please Log In to view prices
Pickguard - Strat style, 3-Ply, 11 hole
Colors Available:
Stratocaster style 3 ply pickguard with 11 mounting holes. Top and bottom layers are the same with an alternate middle layer.
Please Log In to view prices
Jack Plate - Gotoh, Relic, Aged Chrome
The Gotoh Relic strat® style jack plate is a convincingly aged part that is perfect for a vintage guitar or a relic'd guitar. Parts from the Gotoh Relic series are uniquely worn for an aged look that offers the functionality of a new part. The various techniques used on these parts provide a relic'd look that appears genuine and not overdone. This plate fits 1/4" jacks. Relic'd mounting screws are included.
For matching aged hardware, please check out the rest of the Gotoh Relic series:
  • Tremolo Set - P-GGT-82
  • 6-in-a-line Tuners - P-GGT-81
  • Strap Buttons - P-GGT-86-AC
  • Neck Plate - P-GGT-89
  • String Trees - P-GGT-92
Please Log In to view prices
Control Plate - Gotoh, Relic, Aged Chrome
The Gotoh Relic tele control plate is a convincingly aged part that is perfect for a vintage guitar or a relic'd guitar. Parts from the Gotoh Relic series are uniquely worn for an aged look that offers the functionality of a new part. The various techniques used on these parts provide a relic'd look that appears genuine and not overdone. This plate fits 3/8" bushing pots such as the CTS R-VC-MA or Alpha R-V38-XA and is compatible with standard selector switches. Relic'd mounting screws are included.
For matching aged hardware, please check out the rest of the Gotoh Relic series:
  • Dome Knobs - P-GGT-90
  • Tele Bridge - P-GGT-85
  • String Ferrules - P-GGT-87
  • 6-in-a-line Tuners - P-GGT-81
  • Strap Buttons - P-GGT-86-AC
  • Neck Plate - P-GGT-89
  • String Trees - P-GGT-92
Please Log In to view prices
Pickguard - Fender®, for American Stratocaster, 11-hole
Colors Available:
Fits most American and Mexican stratocasters. 3 ply standard 11 hole pickguard. Fits 3 single coil pickukps.
Please Log In to view prices
Switch - Switchcraft, Pickup Selector Toggle, SPST, right angle
Switchcraft Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® P-SW01. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. Features a slightly longer (3/8”) bushing ideal for thicker topped guitars.
  • Tip not included. See W-SC-W0X
  • Black finish
Please Log In to view prices