You are here

Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(59 pages)
P-GTMH04Tuners - Fender®, locking, chrome
Package of 6

Deluxe locking tuners used on most American Deluxe Strat® models. May also be used as an upgrade to most Fender® instruments. Chrome. Set of 6


Please Log In to
view prices
Click to read more
P-GGT-9-XTuners - Gotoh, Vintage Oval Knob, 6-in-line
Package of 6
Colors Available:

Machine heads without a sealed gear are criticized for not having the same smooth performance, efficiency and durability that sealed gear tuners have. The SD series solves these problems by combining "Rock-solid" technology and the post collar or: "Self-Center Guide", found on enclosed gears in the base plate of the gear allowing the post to perfectly align itself with the bushing which attaches the gear to the headstock. The SD series uses a torque balancer to ensure steady rotation of the tuner button giving high quality sound performance as well as great functionality.


Please Log In to
view prices
Click to read more
S-T220Tremolo Stopper - Brass Block, Hex Screw, Allen Key

Brass tremolo stopper. Used as a floating bridge stop for Fender and Floyd Rose style tremolo systems. Prevents inadvertent vibrato effects produced by resting the picking hand over the bridge while playing. Allows for down-bends and prevents up-bends for a stabilized return of the whammy bar. Allen screw can be easily reversed to allow for a floating bridge setup again. Includes: (1) brass block (1.05" L x .39" W x .49" H) (1) allen key, 2 mm (1) allen screw (M4 x .70 thread, 20 mm length) (1) hex nut (M4 x .70 thread) (2) countersunk mounting screws (10 mm length)


Please Log In to
view prices
Click to read more
P-H702Control Plate - Telecaster Style, Chrome
Tele style control plate in chrome. 5 3/8” plate mounting center distance (0.12” diameter, recessed).

  • Two potentiometer mounting holes for 3/8” bushing diameters
  • One standard selector switch mounting slot (1.63” mounting center distance, 0.15” diameter, recessed)


Made in Korea
Please Log In to
view prices
Click to read more
R-VPMT-VTCircuit - PMT, Variable Treble Bleed

The V-Treb Variable Treble Bleed Circuit attaches to the bottom of any volume pot and corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced. Turning the trim pot clockwise increases the amount of treble bypass for a brighter sound at reduced volumes. Turning the trim pot counter clockwise reduces the amount of treble bypass for a warmer tone at reduced volumes. With the volume at 10, the V-Treb is removed from the circuit and does not affect the sound.


Please Log In to
view prices
Click to read more
S-W603Wire - 4 Conductor, Shield
Sold by the foot
Shielded 4-conductor wire used in wiring pickups, controls etc. Shielded 4-conductor wire is commonly used in humbucking pickups to allow more wiring flexibility over the 2-conductor setup. Building a pickup using 4-conductor wire will allow you to wire up coil cut, phase switching, and series/parallel configurations. Additionally, 2 conductor pickups can be converted to 4-conductor using this wire.

  • Sold per foot
  • 28 AWG
  • Foil shield
  • 12”/3.2mm outer diameter
  • Sold individually
Please Log In to
view prices
Click to read more
P-GKLU-SD90SLXTuners - Kluson, 3 per side, with pearloid keystone
Package of 6
Colors Available:

Kluson Pearloid Button Tuners, 3 Per Side, Pearl. Complete set with both bass and treble side individual tuning machines. Includes bushings and mounting screws. Historically correct replacement for many '50s and '60s Gibson®, Martin® and Epiphone® guitars. Used on a Les Paul / SG Standard Historically used on:



  • 1958 - 1959 Gibson® Flying V
  • 1958 - 1959 Gibson® ES-345
  • 1956 - 1959 Gibson® ES-295
  • 1956 - 1959 Gibson® J-200
  • 1956 - 1959 Gibson® ES-350
  • 1956 - 1959 ES-5
  • 1957 Gibson Explorer Prototype Futura
  • 1959 Epiphone Crestwood Deluxe

Please Log In to
view prices
Click to read more
P-GTNN06-SLOTNut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
Please Log In to
view prices
Click to read more
P-GTNN07Nut - Bone, for Gibson, 43mm X 5.9mm X 8mm, Flat
Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.
Please Log In to
view prices
Click to read more
P-GTNP-SCREWSScrew - Fender®, Neck Mounting
Package of 4

Fender® neck mounting screws (4 pack)


Please Log In to
view prices
Click to read more

Pages

(59 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Guitar Parts & Pickups