Guitar Parts & Pickups

Fender® vintage strap buttons. Designed to fit most Fender instruments. All mounting hardware included.

High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.

• Measures 56 mm x 11 mm x 6.35 mm
• Sold individually

Adapter bushings to retrofit US 1/4 inch post Kluson tuners in a headstock drilled for modern die cast tuners. Nickel plating. Set of 6. These Kluson® steel replacement - adapter bushings are intended for use in converting a modern 10mm drilled headstock to accept a vintage Kluson stamped steel tuning machines with the original US 1/4 inch string post diameter. Many repair shops use these to convert a vintage instrument back to original peg head specs

This Rhythm - Treble Ring for Gibson® Les Paul® is on thin plastic with Gold Lettering. The self-adhesive backing makes it easy to apply under the washer and nut of your typical 3-way toggle switch.

1970s vintage-style neck plate with engraved "F" logo, for use on most Fender guitars and basses using four-screw neck mounting without Micro-Tilt™ adjustment. Mounting screws included.
Features:

• 1970s vintage-style neck plate
• Engraved "F" logo
• Mounting screws included
• For most Fender guitars and basses with four-screw neck mounting and no Micro-Tilt adjustment

Genuine Fender® vintage-style Strat bridge mounting screws. Some of Fender’s most requested replacement screws. Made for Fender® and used on a variety of vintage and contemporary models.

• Set of 12 replacement screws
• Genuine vintage specifications
• Nickel plating
• Phillips oval-head (#6 x 1 1/8")
• Used on American Vintage Stratocaster® guitars

Gotoh vintage style guitar machine heads w/staggered posts, 6-in-line.

• Vintage style slotted post
• 15:1 gear ratio
• 6-in-line orientation
• Mounting hardware included

Gibson style top hat knob. 24 spline (for knurled split shaft pots).

This set of string guides includes the Gotoh RG105 and RG130 for string retention with a staggered height. One guide has a height of 2.5mm and the other has a height of 5mm achieved by using different sized standoffs. These string guides are a vintage style stamped leaflet. Mounting screws are included. String guides are also referred to as string trees or string retainers.

U.S. made plated brass jack plates for Les Paul and other compatible guitars. These plates feature high quality finishes and fit ⅜” bushing jacks like Switchcraft W-SC-11.

A genuine Bigsby B5 vibrato with a modified string mounting bar that features counterbore holes for a string-through style rather than the original mounting pins. This version allows for quick and easy restrings.

High quality 18% Nickel-Silver fret wire in jumbo sizes.

• 2.6mm - 3.0mm Crown Widths, (0.102" - 0.118")
• 1.0mm - 1.45mm Crown Heights, (0.039" - 0.057")

Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-J-1 28 PRICE P-GTFW-J-2 26 PRICE P-GTFW-J-3 25 PRICE P-GTFW-J-4 22 PRICE P-GTFW-J-5 18 PRICE P-GTFW-J-6 21 PRICE P-GTFW-J-7 19 PRICE For additional sizes and options please see:

• Small Sizes - P-GTFW-S-X
• Medium Sizes - P-GTFW-M-X
• Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-J-1 2.6 mm (0.102") 1.0 mm (0.039"

Gotoh’s Telecaster bridge has the vintage look and mounting layout with a few modern additions: The In-Tune saddles give you the vintage look with unique grooves cast into the saddle to move the contact point of each string for more accurate intonation. Each saddle is reversible and can be used in any position. This gives you a huge advantage over traditional barrel style saddles that were never designed with precision intonation in mind. The brass saddles will give you that bright Tele twang! The stamped steel base plate’s cut down sides give you the unrestricted string access that many modern players prefer.

Set screw. Designed to replicate an "aged" look.

Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm with radiused bottom.

Genuine Fender® neck mounting screws. These neck mounting screws are chrome plated and are the standard screws included on most Fender® screws, Includes a full set of four Phillips screws.

Gibson style top hat knob. Fits fine knurled pot shafts.

Tremolo tension springs. Similar to P-GTSPRN-5 but generic manufacture.

Jaguar style master control plate in chrome. Perfect replacement for most Jaguar style guitars. 4.12” x 1.86” plate mounting center distance (0.14” diameter, recessed).

For non-tremolo fixed bridge Strat® style guitars that have through-body string mounting. Steel saddle. Saddle intonation can be individually adjusted. Mounting screws included. Hardware included.

Original Fender 250s: The "high-octane" nickel plated steel string for your electric guitar. With a pure steel wrap, the magnets in your pickups use the whole string, not just the core, and transform the energy into high output bursts of sound. The nickel plating enhances feel while reducing "string squeak" and fret wear without compromising tone. Combine the high output and dynamic sound of steel with the smooth feel of nickel; perfect for rock and other styles of music where the guitar needs to cut through. Original equipment on all U.S. made Fender® electric guitars. Ball End. Made in the USA Nickel Plated Steel Gauge Sets: .009 - .042 contains .009, .011, .016, .024, .032, .042 .011 - .049 contains .011, .014, .018, .028, .038, .049 .010 - .046 contains .010, .013, .017, .026, .036, .046

Designed to for use with the Telecaster® single coil pickup; this heavier brass bridge features six allen-adjustable brass saddles. Strings mount through the guitar body and all of the mounting screws are included. Hardware included.

Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.

The Gotoh GE1996T is a high end locking tremolo licensed by Floyd Rose. This version of the locking tremolo is a premium option that is great for new installs or upgrading original units. The hardened steel saddles and patented stud lock technology ensure a rock solid performance. Springs, spring claw, and all mounting hardware are included along with two hex wrenches for dialing in adjustments. 40mm block.