Guitar Parts & Pickups
Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Bridge Post - For Nashville Bridges, Plated Brass, USAU.S. made bridge posts for Nashville style bridges. These bridge posts are made of solid brass and are finished with a high quality plating. Matching anchors are included. Note: These posts have 4.95mm diameters. Check your bridge for compatibility.
Package of 2
Bridge - Gotoh, Tune-O-Matic, Standard PostBridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.
Control Plate - Jaguar Style, Master, Chrome
Jaguar style master control plate in chrome. Perfect replacement for most Jaguar style guitars. 4.12” x 1.86” plate mounting center distance (0.14” diameter, recessed).
Jack Plate - Fits Les Paul, PlasticGeneric plastic jack plate. Fits Les Paul and other guitars. Mount the guitar's output jack in the ⅜" hole in the center of the jack plate.
Wire - Push Back Cloth for Single Coil Pickup, Black
Sold by the footBlack vintage style push back wire for building or repairing single coil pickups. Push back style eliminates the need for stripping.
- Outer diameter: 0.07"
- Sold by the foot
Cover - Humbucker, 50mm, Nickel Silver, USAOriginal, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.
Tension Spring - Bigsby, Vibrato, 1 ⅛" longGenuine Bigsby® replacement spring for tremolo units. These springs are 1 1/8" (28.6mm) in length and are the longest springs available from Bigsby®. 1 1/8" springs are longer than the standard ⅞” (22.2mm) springs that are stock in most Bigsby models. This spring can be used to raise the trem arm.
Jack Plate - replacement for StratocasterReplacement jack plate for Stratocasters
Knob - Small Chicken Head, Black, Set Screw
Small black plastic chicken head knob with an off-white indicator line for a vintage look. Fits 6.35mm (1/4") potentiometer shafts.
Washer - Bigsby, Plastic, for tremolo units
Genuine Bigsby® replacement washer for tremolo units. This white plastic washer sits beneath the spring in the cup located on the frame. These washers reduce noise and potential damage to the spring and cup.
Strap locks - Grover, quick-releaseGrover Strap Locks feature the 'quick release' mechanism players want and need. This strong, yet lightweight accessory provides security along with the ability to easily remove the strap for use on another instrument or storage.
Package of 2
Tuners - Grover, Sta-Tite, 3 per side vertical, nickel
Package of 6The Original Grover® Sta-Tite machine head. The classic styling of the Sta-Tite returns with the Grover® name. The butter bean button identifies this as the original. A 14:1 gear ratio provides precise tuning. Wood screws, washers and bushing included.
Nut - Gold Tone, Zero Guide Slotted
The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Durability Slots wear down over time. Minimal wear.
Knob - Fender®, Telecaster / P-Bass Barrel, Chrome
Package of 2Tele/P-Bass Barrel. Chrome, package of 2.
Tuners - Grover, Mini Lock Roto, 6 in a line, 18:1The same innovative engineering and classic design as the Original Locking Rotomatics®, but with smaller buttons for 6-in-line guitars, or for those who prefer a little more space for their fingers. Gear ratio is 18:1. Package of 6
Package of 6
Strap Buttons / Pins - Fender®, vintage
Package of 2Fender® vintage strap buttons. Designed to fit most Fender instruments. All mounting hardware included.
Screws - Fender®, for fastening pick guards
Package of 24Original Fender pickguard screws. Set of 24 Phillips head screws (4x1/2") for pickguard and control plate mounting on most Fender instruments.
Guitar strings - Fender, Electric, Original 250s
Package of 6Original Fender 250s: The "high-octane" nickel plated steel string for your electric guitar. With a pure steel wrap, the magnets in your pickups use the whole string, not just the core, and transform the energy into high output bursts of sound. The nickel plating enhances feel while reducing "string squeak" and fret wear without compromising tone. Combine the high output and dynamic sound of steel with the smooth feel of nickel; perfect for rock and other styles of music where the guitar needs to cut through. Original equipment on all U.S. made Fender® electric guitars. Ball End. Made in the USA Nickel Plated Steel Gauge Sets: .009 - .042 contains .009, .011, .016, .024, .032, .042 .011 - .049 contains .011, .014, .018, .028, .038, .049 .010 - .046 contains .010, .013, .017, .026, .036, .046
Wire - Push Back Cloth for Single Coil Pickup, White
Sold by the footWhite vintage style push back wire for building or repairing single coil pickups.Push back style eliminates the need for stripping.
- Outer diameter: 0.07"
- Sold by the foot
Tuners - Kluson, Revolution G Mount, Pearloid knob, 3 per sideThe Kluson® Revolution G-Mount 19:1 high ratio tuning machines offer the traditional Kluson® footprint and a newly designed sealed die-cast, one-piece housing. High gear ratio guarantees silky smooth operation, fine tuning stability with no backlash. These state of the art tuning machines are designed to directly retrofit die-cast tuning machines that have a hex head (collared) bushing and a traditional Kluson® two-screw mounting pattern. Uses the common modern 25/64 in. (10mm) peghole. The G-Mount pattern makes these a great drop-in replacement for the modern “Gibson® Deluxe” collared tuning machines found on many models. No modification or unused holes!
Package of 6
- All mounting hardware is included.
- Precise 19:1 gear ratio for smooth operation
- Sealed diecast,one piece housing
- Traditional Kluson® two-screw mounting pattern with collared bushing.
- Pearloid button
- Available in Nickel or Gold
Vibramate - Super Grip for Bigsby Trems
The Vibramate Super Grip is custom made specifically to fit the arm of your Bigsby vibrato. The textured design adds contour to the overall grip and a soft comfortable feel for subtle vibrato techniques. The Vibramate Super Grip easily slides onto your existing Bigsby vibrato arm without any modifications or special tools. The tapered design ensures a snug fit once installed but can be removed just as easily by sliding it back off. One size fits all - Vibramate Super Grip fits all Bigsby vibratos using the standard stock flat arm including Import and Left-Hand models. Made in USA.
Cover - Tele, Neck, Open, Nickel Silver, USAOriginal, made in USA, covers for open-style tele neck pickups. These premium tele covers are made of nickel silver.
Bridge Pin Set - Original Fender, for acousticSet of seven slotted bridge pins for use with most Fender acoustic guitars as well as other manufacturers. Includes extra bridge pin and matching strap end pin.
Package of 7