Guitar Parts & Pickups

The Kluson Contemporary Series 19:1 ratio locking tuning machine uses the more desireable rear knob locking system and is designed for usage on contemporary guitars. This design requires an individual mounting hole location offset at approximately 7 O'clock or 4 O'clock depending on left or right handed application (bass or treble side). Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. This is a 6 in line set of tuning machines for right handed instruments (non-reverse headstocks) with all mounting hardware included

Nickel baseplate used for building your own humbucker pickups or repairing vintage originals. Vintage style spacing will accommodate many production pickups as a replacement.

• 50mm/1.95” vintage style spacing (outer holes center to center)
• .03 stamped nickel construction
• Compatible with our pickup covers (P-GP-COV-1C and P-GP-COV-1N)
• Sold individually

Original Fender® tuner/machine heads for vintage style for Strats and Teles. Gold set of 6-in-a-line.

The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only take a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Intonation Large pitch deviation in early frets. (See intonation graph below) Minimal pitch deviation in early frets.

Vibramate Left Handed V5 Adapter Mounting Kit, For Bigsby B5 Now you can install a Bigsby Vibrato on your guitar without drilling any holes! The Vibramate Left Hand V5 Model Quick Mount Kit is designed for a Bigsby B5 Original Vibrato and will fit most traditional style guitars that have a tune-a-matic style bridge and a stop-tailpiece. The kit installs in minutes with the included hardware and eliminates the need for drilling permanent holes in your instrument. Vibramate comes with 3 felt-pads secured to the bottom of the mounting plate for a soft touch to the top of your guitar. The unit automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance.

Now you can install a Bigsby Vibrato on your American Standard Telecaster® style guitar without drilling any holes! The Vibramate V5-TEAS-1 Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most American Standard Telecaster® guitars that have a 3-screw mount bridge. Vibramate The Vibramate V5-TEAS kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and mounting hardware. There is no need for drilling, soldering or removing the neck.

Vibramate V5-TEV Stage II with Humbucker Ash-Tray bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

Fits SKU# P-GB500-X Now you can install a Bigsby Vibrato on your guitar without drilling any holes!

Alnico 3 rod magnets with a .195” diameter. These magnets feature a vintage style chamfer and are not magnetized. Great for 1950s Tele style pickups and many others.

Original Fender® pickguard replacement for 62' P-Bass, 4-ply. Multiple color options available.

"Gretsch Filter'Tron Electric Guitar Pickups Filter Out Hum, Neon Noises, Crackle and Electrical Disturbance!" The Filter'Tron "Electronic Guitar Head" was introduced in 1957 at the summer NAMM show in Chicago. Filter'Tron pickups feature dual-coils and are designed to Filter out the electronic hum normally associated with single-coil pickups, while adding a warmer tone, and a significant increase in output and sustain.

Slightly hotter than the 54 models, these recreations of the 1957 Strat® single coil pickups deliver a true vintage tone not available until now. Middle position reverse wound/reverse polarity to achieve noise cancellation when utilizing a 5 way switch. 42 gauge Formvar wire and Alnico III magnets. White covers.

• Magnet Type = Alnico 3 pole pieces
• D.C. Resistance = 5.92k Ohms
• Inductance (henrys) = 3.61
• Wire Type = Formvar AWG 42
• Lead Type = cloth insulated 2 conductor
• Polarity = normal

Slightly hotter even than the 57 models, these recreations of the 1962 Strat® single coil pickups deliver a true vintage tone that is a blast from the past. Middle position reverse wound/reverse polarity to achieve noise cancellation when utilizing a 5 way switch. 42 gauge Formvar wire and Alnico III magnets. White covers.

• Magnet Type = Alnico 3 pole pieces
• D.C. Resistance = 6.19k Ohms
• Inductance (henrys) = 2.63
• Wire Type = Formvar AWG 42
• Lead Type = cloth insulated 2 conductor
• Polarity = normal

Single '57/'62 Strat single coil pickup. Reverse engineered, these pickups deliver the original vintage Stratocaster sound, feel, and vibe! This is pure and original Strat tone. The staggered beveled-edge Alnico 5 magnets with Formvar wire produce glistening highs and warm lows that are unquestionably vintage. These pickups feature special beveled edge Alnico 5 magnets and enamel-coated magnet wire.
This pickup is sold individually.

• DC Resistance: 5.6k
• Inductance: 3 H

Made with the same materials and specifications of an early 1950s Telecaster pickup, the Original Vintage Telecaster speaks with extremely accurate vintage Tele twang. Made with AlNiCo 3 magnets, enamel coated magnet wire these pickups duplicate the warmth and edge that you'd come to expect from Fender®.